Chief MSP-CM6HABV71/83 - Manuals

Page 2 - Installation Instructions; IMPORTANT WARNINGS AND CAUTIONS!; Read all instructions before using this

MSP-CM6HABV71/83 Installation Instructions 2 CSAV, Inc., and its affiliated corporations and subsidiaries (collectively, "CSAV"), intend to make this manual accurate and complete. However,CSAV makes no claim that the information contained herein covers all details, conditions or variations, ...

Page 3 - ASSEMBLY; Figure 1

Installation Instructions MSP-CM6HABV71/83 3 ASSEMBLY 1. Attach cables to weights by hand and tighten retaining nut using a 7/16" wrench. Figure 1

Page 4 - INSTALLATION; Figure 2

MSP-CM6HABV71/83 Installation Instructions 4 INSTALLATION 1. Screw tracks to cabinet using 1/8” masonite space. (provides screw head clearence for double wall) Figure 2

Page 5 - Figure 3

Installation Instructions MSP-CM6HABV71/83 5 2. Level cabinet in both directions. Figure 3

Page 6 - Figure 4

MSP-CM6HABV71/83 Installation Instructions 6 3. Attach door plates 1 inch down from the top with the “V” notch aligned with the panel edge. Figure 4

Page 7 - Figure 5

Installation Instructions MSP-CM6HABV71/83 7 4. Gently push to make sure that wheels are touching track. Figure 5

Page 8 - Figure 6

MSP-CM6HABV71/83 Installation Instructions 8 5. Remove nuts from the studs on the wheel plates and place the panel on the mechanism. 6. Center the panel and tighten the nuts. Figure 6

Page 9 - Figure 7

Installation Instructions MSP-CM6HABV71/83 9 7. While holding back the chain attachment bracket, move the door up and down to check for balance. Also check to see if thecounterweights hit or rub the cabinet. If it does, it’s not level. Figure 7

Page 10 - Figure 8

MSP-CM6HABV71/83 Installation Instructions 10 8. If the panel seems light, add weight to it. If the panel seems heavy, add weight to the counterweights. Figure 8

Page 11 - RF Receiver Installation; Figure 9; ADJUSTMENTS; Adjust Door Travel Distance; System Controls and Indicators; Learn Mode

Installation Instructions MSP-CM6HABV71/83 11 RF Receiver Installation Install RF reciever following the instructions provided with thereceiver. System Activation 1. Insert plug from the power supply into the jack on the top ofthe motor box. Figure 9 2. Plug Powercord into 115VAC outlet. IMPORTANT !...

Page 12 - Status Light Codes; Control Input- 8 position RJ 45 modular phone jack; Control Input on Front of Motor Box

MSP-CM6HABV71/83 Installation Instructions 12 these learned measurements, so that next time the system runsit knows where to start and stop. Status Light Codes There is a light on the front of the mechanism motor box thatwill tell through its pattern of flashes and colors what themechanism is doing....

Page 14 - Europe; Asia Pacific

MSP-CM6HABV71/83 Installation Instructions USA/International A 8401 Eagle Creek Parkway, Savage, MN 55378 P 800.582.6480 / 952.894.6280 F 877.894.6918 / 952.894.6918 Europe A Fellenoord 130 5611 ZB EINDHOVEN, The Netherlands P +31 (0)40 2668620 F +31 (0)40 2668615 Asia Pacific A Room 30I, Block D, L...