Page 2 - Installation Instructions; DISCLAIMER
MSM/MTM Series Installation Instructions 2 DISCLAIMER Milestone AV Technologies, and its affiliated corporations andsubsidiaries (collectively "Milestone"), intend to make thismanual accurate and complete. However, Milestone makes noclaim that the information contained herein covers all deta...
Page 3 - DIMENSIONS; MSM
Installation Instructions MSM/MTM Series 3 DIMENSIONS MTM SPACING 15.75 [400] MAX VERTICAL 6.00 152.4 1.00 25.4 1.00 25.4 .33 8.3 18.79 477.4 MAX HORIZONTAL SPACING 26.25 [667] 15.10 383.4 .50 12.7 25.00 635 1.75 44.5 7.63 193.7 13.53 343.7 2.00 50.8 .32 8.1 7.53 191.2 16.00406.4 RAILS SLIDE LEFT/RI...
Page 4 - LEGEND
Installation Instructions MSM/MTM Series 4 LEGEND Tighten Fastener Apretar elemento de fijación Befestigungsteil festziehen Apertar fixador Serrare il fissaggio Bevestiging vastdraaien Serrez les fixations Loosen Fastener Aflojar elemento de fijación Befestigungsteil lösen Desapertar fixador Allenta...
Page 5 - TOOLS REQUIRED FOR INSTALLATION
MSM/MTM Series Installation Instructions 5 TOOLS REQUIRED FOR INSTALLATION PARTS 7/32" (5.5mm) Wood Stud #2 5/16" (7.9mm) Concrete Custom MSM6XXX/ MTM6XXX Hardware [Included with MSM6XXX/MTM6XXX Models Only] J3 (6) J5 (6) A (1) B (1) C (1) (MSM Only) (MTM Only) F (1) G (1) (MSM Only) (MTM On...
Page 6 - INSTALLATION; Locate Mounting Site; Installing to a Wood Stud Wall; single stud installation method; Figure 1
MSM/MTM Series Installation Instructions 6 INSTALLATION The MTM and MSM have been designed to be mounted directlyonto either a wood stud or concrete wall. The MTM hasbrackets which allow the TV to be tilted. The MSM has staticbrackets which keep the TV in an upright position. Locate Mounting Site WA...
Page 7 - Figure 3; Installing to a Concrete Wall; Figure 4
Installation Instructions MSM/MTM Series 7 WARNING: EXPLOSION AND FIRE HAZARD! CUTTING OR DRILLING INTO GAS PLUMBING CAN CAUSE DEATHOR SERIOUS PERSONAL INJURY! ALWAYS make certainarea behind mounting surface is free of gas, water, waste, orany other plumbing before cutting, drilling, or installingfa...
Page 8 - Attaching Interface Brackets to TV
MSM/MTM Series Installation Instructions 8 8. Mark the attachment points for the lower mounting slots.(See Figure 4) 9. Drill one pilot hole at each marking for lower mountingholes. (See Figure 4) 10. Install an anchor (K1) into each pilot hole using a hammer. 11. Use two 5/16 x 2-1/2" lag bolts...
Page 9 - Figure 7
Installation Instructions MSM/MTM Series 9 Figure 7 3. If necessary, the tilt interface bracket knobs may beswitched to allow the interface brackets to be reversed.(See Figure 7) a. Remove display from mount.b. Remove interface brackets from display.c. Hold the right interface bracket horizontally, ...
Page 10 - Figure 9
MSM/MTM Series Installation Instructions 10 Figure 9 2. Hang top hook of interface brackets onto the top bar of themount. (See Figure 9) NOTE: The screen initially installs into the "kickstand mode" to allow easy cable access. 3. Slide screen and bars to desired viewing position. 4. Route ca...
Page 12 - Europe; Asia Pacific
MSM/MTM Series Installation Instructions USA/International A 8401 Eagle Creek Parkway, Savage, MN 55378 P 800.582.6480 / 952.894.6280 F 877.894.6918 / 952.894.6918 Europe A Fellenoord 130 5611 ZB EINDHOVEN, The Netherlands P +31 (0)40 2668620 F +31 (0)40 2668615 Asia Pacific A Room 24F, Block D, Lil...