Chief MSA Series - Manuals - manualsarea.com

Page 2 - Installation Instructions; DISCLAIMER

MSA/MTA Series Installation Instructions 2 DISCLAIMER Milestone AV Technologies, and its affiliated corporations andsubsidiaries (collectively "Milestone"), intend to make thismanual accurate and complete. However, Milestone makes noclaim that the information contained herein covers all deta...

Page 3 - DIMENSIONS

Installation Instructions MSA/MTA Series 3 DIMENSIONS MTA SPACING 15.75 [400] MAX VERTICAL 12.00 304.8 2.00 50.8 11.00 279.4 13.50 342.9 MAX HORIZONTAL SPACING 26.25 [667] 9.38 238.1 .75 19.1 .348.6 1.50 38.1 25.00 635 6.00 152.4 1.00 25.4 .81 20.6 .32 8.1 6.00 152.4 16.00 406.4 RAILS SLIDE LEFT/RIG...

Page 4 - LEGEND

Installation Instructions MSA/MTA Series 4 LEGEND Tighten Fastener Apretar elemento de fijación Befestigungsteil festziehen Apertar fixador Serrare il fissaggio Bevestiging vastdraaien Serrez les fixations Loosen Fastener Aflojar elemento de fijación Befestigungsteil lösen Desapertar fixador Allenta...

Page 5 - TOOLS REQUIRED FOR INSTALLATION

MSA/MTA Series Installation Instructions 5 TOOLS REQUIRED FOR INSTALLATION PARTS #2 7/32" (5.5mm) Wood Stud 5/16" (7.9mm) Concrete Custom MSA6XXX/ MTA6XXX Hardware [Included with MSA6XXX/MTA6XXX Models Only] J3 (6) J5 (6) A (1) B (1) C (1) (MSA Only) (MTA Only) F (1) G (1) (MSA Only) (MTA On...

Page 6 - INSTALLATION; Locate Mounting Site; Installing to a Wood; Installing to a Wood Stud Wall; single stud installation method; Figure 1

MSA/MTA Series Installation Instructions 6 INSTALLATION The MTA and MSA have been designed to be mounted directlyonto either a wood stud or concrete wall. The MTA has bracketswhich allow the TV to be tilted. The MSA has static bracketswhich keep the TV in an upright position. Locate Mounting Site WA...

Page 7 - Figure 3; Installing to a Concrete Wall; Figure 4

Installation Instructions MSA/MTA Series 7 Figure 3 6. Drill one 7/32" pilot hole in each stud. 7. Use two 5/16 x 2-1/2" lag bolts (H3) and two 5/16" flatwashers (H2) [one lag bolt and washer for single studinstallation] to attach top of mount to wall. (See Figure 3) 8. Mark the attachme...

Page 8 - Attaching Interface Brackets to TV

MSA/MTA Series Installation Instructions 8 washers (H2) to attach the mount to the wall through thelower mounting holes. (See Figure 4) 12. Slide rails to approximate center of screen location. Attaching Interface Brackets to TV 1. Align the center of the bracket with center of screen.(See Figure 4)...

Page 9 - Figure 7

Installation Instructions MSA/MTA Series 9 Figure 7 Attaching Screen to Wall Mount 1. Adjust Velcro® pull strap (if necessary) so it does notextend beyond bottom of screen. (See Figure 8) NOTE: Do NOT allow both interface brackets to be located onsame side of wall bracket. (See Figure 8) NOTE: NEVER...

Page 10 - Figure 9

MSA/MTA Series Installation Instructions 10 5. Pull downward on the pullstraps and swing inward towardwall, latching interface brackets to lower bar and lockingbottom of screen to the mount. (See Figure 9) Figure 9 Locking Mount (Optional) 1. Add optional security bracket (F or G) to the mount. (See...

Page 12 - Europe; Asia Pacific

MSA/MTA Series Installation Instructions USA/International A 8401 Eagle Creek Parkway, Savage, MN 55378 P 800.582.6480 / 952.894.6280 F 877.894.6918 / 952.894.6918 Europe A Fellenoord 130 5611 ZB EINDHOVEN, The Netherlands P +31 (0)40 2668620 F +31 (0)40 2668615 Asia Pacific A Room 24F, Block D, Lil...