Chief MF1 Series - Manuals - manualsarea.com

Page 2 - Installation Instructions; DISCLAIMER

MF1, MF2, PF1, PF2 Series Installation Instructions 2 DISCLAIMER CSAV, Inc., and its affiliated corporations and subsidiaries(collectively, "CSAV"), intend to make this manual accurate andcomplete. However, CSAV makes no claim that the informationcontained herein covers all details, conditio...

Page 3 - DIMENSIONS

Installation Instructions MF1, MF2, PF1, PF2 Series 3 [2180]85-7/8 [44]1-3/4 [65]2-1/2 [39]1-1/2 [1211]47-5/8 [2327]91-5/8 [1316] 51-7/8 [431] 17 [661] 26 [889] 35 [1463]57-5/8 MF1, MF2 PF1, PF2 DIMENSIONS

Page 4 - LEGEND

Installation Instructions MF1, MF2, PF1, PF2 Series 4 LEGEND Tighten Fastener Apretar elemento de fijación Befestigungsteil festziehen Apertar fixador Serrare il fissaggio Bevestiging vastdraaien Serrez les fixations Loosen Fastener Aflojar elemento de fijación Befestigungsteil lösen Desapertar fixa...

Page 5 - TOOLS REQUIRED FOR INSTALLATION; OR

Installation Instructions MF1, MF2, PF1, PF2 Series 5 TOOLS REQUIRED FOR INSTALLATION PARTS 3/16" (included) 1/4" (To remove baseplates from packaging) K (1) (MF Only) A (1) B (1) C D (1) (PF Only) E (1) F (1) G (4) H (1) J (1) 5/16-18 x 1/2" M (4) 5/16-18 x 3/4" N (4) 5/16-18 x 1-1/...

Page 6 - ASSEMBLY; Assembling Base for Single Display Stand; Figure 1; Figure 2; Assembling Base for Dual Display Stand; Assembling Base

MF1, MF2, PF1, PF2 Series Installation Instructions 6 ASSEMBLY CAUTION: Attachment holes may be damaged if a power drill is used to insert button head cap screws. Screws shouldfirst be inserted and turned BY HAND with the hex key or witha handheld screwdriver BEFORE using the hex head drill bitand p...

Page 7 - Figure 5; Attaching Single Head Assembly; Figure 7; Attaching Dual Head Assembly; Figure 8

Installation Instructions MF1, MF2, PF1, PF2 Series 7 Figure 5 3. Place top base section and center post assembly on top ofthe four base pieces. (See Figure 6) 4. Fasten lower base pieces to top base section and centerpost assembly using twelve 5/16-18 x 1/2" flat head capscrews (L). (See Figure...

Page 8 - Attaching Display to Stand; Figure 9; Set the height of the stand so the display

MF1, MF2, PF1, PF2 Series Installation Instructions 8 Attaching Display to Stand WARNING: EXCEEDING MAXIMUM WEIGHT CAPACITY MAY LEAD TO SERIOUS PERSONAL INJURY ORDAMAGE TO EQUIPMENT! It is the installer’s responsibilityto ensure the total amount of weight placed on the standdoes not exceed 125 lbs (...

Page 9 - Tilting Display

Installation Instructions MF1, MF2, PF1, PF2 Series 9 Tilting Display The display(s) can be tilted up to 15 o either backward or forward from a straight upright position. In a dual stand, thetilting is only restricted by the size of the display. 1. Turn knob counterclockwise on back of head assembly...

Page 10 - Using the Stand

MF1, MF2, PF1, PF2 Series Installation Instructions 10 Using the Stand CAUTION: This stand is intended for use only with the products and maximum weights indicated: 125 lbs (56.70 kg)for the MF1, 250 lbs (113.40 kg) for the MF2 [125 lbs(56.70 kg) per faceplate]; 200 lbs (90.72 kg) for the PF1,400 lb...

Page 12 - Europe; Asia Pacific

MF1, MF2, PF1, PF2 Series Installation Instructions USA/International A 8401 Eagle Creek Parkway, Savage, MN 55378 P 800.582.6480 / 952.894.6280 F 877.894.6918 / 952.894.6918 Europe A Fellenoord 130 5611 ZB EINDHOVEN, The Netherlands P +31 (0)40 2668620 F +31 (0)40 2668615 Asia Pacific A Room 24F, B...