Chief FSD-4100 - Manuals - manualsarea.com

Page 2 - IMPORTANT WARNINGS AND PRECAUTIONS!; CAUTION; port a redundant weight factor; the total weight of the equipment. If not, reinforce the structure; TOOLS REQUIRED FOR INSTALLATION; CONTENTS

Installation Instructions FSD-4100 1 IMPORTANT WARNINGS AND PRECAUTIONS! WARNING: A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions. CAUTION: A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the ...

Page 3 - DIMENSIONAL DRAWING

2 Installation Instructions FSD-4100 DIMENSIONAL DRAWING

Page 4 - INSPECT THE UNIT BEFORE INSTALLING; WARNING: Watch for pinch points. Do not put your fingers

Installation Instructions FSD-4100 3 INSPECT THE UNIT BEFORE INSTALLING WARNING: Watch for pinch points. Do not put your fingers between movable parts. 1. Carefully inspect the FSD-4100 for shipping damage. If anydamage is apparent, call your carrier claims agent and do notcontinue with the installa...

Page 5 - PARTS

4 Installation Instructions FSD-4100 PARTS Item Description Qty. Item Description Qty. 10 Mount 1 40 Screw, M4 X .7 X 20mm 4 10A Base Cover 1 50 Screw, M4 X .7 X 10mm 4 10B Cable Management Cover 1 60 Spacer, Nylon, .500 OD X .19 X .50 4 20 Nuts, T 3 70 Tie Wraps 4 30 Screws, 10-24 X 5/8” 3 80 Allen...

Page 6 - MOUNT THE DISPLAY

Installation Instructions FSD-4100 5 FSD-4100 INSTALLATION WARNING: It is the responsibility of the installer to verify that the surface to which the FSD-4100 is anchored willsafety support the combined load of all attachedcomponents and equipment. Install the FSD-4100 as follows: NOTE: Numbers in (...

Page 7 - ADJUSTMENTS; Screen Height Adjustment; Arm Tension Adjustment; Securing Monitor

6 Installation Instructions FSD-4100 ADJUSTMENTS Screen Height Adjustment 1. Using a screw driver, slightly loosen the screws (40or 50) securing the display panel to the mounting bracket(see Figure 4). 2. Adjust the display panel to the desired height. 3. Using a screw driver, tighten the screws sec...

Page 8 - CABLE MANAGEMENT; Figure 6. Cable Management Cover

Installation Instructions FSD-4100 7 CABLE MANAGEMENT 1. Remove screw and cable management cover (10B) (seeFigure 6). 2. Route the power/audio/video cables down the arm (seeFigure 7). 3. Route the power/audio/video cables through the slot in the bot-tom of the arm (see Figure 8). 4. Secure the power...

Page 9 - Right and Left 35 Degree Rotation

8 Installation Instructions FSD-4100 Right and Left 35 Degree Rotation 1. Turn the base 35 degrees in one direction to its stop (seeFigure 9). 2. Neatly and carefully, route the power/audio/video cablesthrough the slot in the side of the base. 3. Secure the power/audio/video cables using a tie wrap ...

Page 10 - Right and Left 110 Degree Rotation; 5 Degree Stop

Installation Instructions FSD-4100 9 Right and Left 110 Degree Rotation 1. Using an Allen wrench (provided), remove the 35 degree stop(see Figure 11). 2. Turn the base 110 degrees in one direction to its stop (seeFigure 12). 3. Neatly and carefully, wrap power/audio/video cables twiceinside base wit...

Page 11 - Check Rotation; Figure 15. Rotate In Opposite Direction

10 Installation Instructions FSD-4100 Check Rotation 1. Rotate screen in one direction until it reaches its stop (see Fig-ure 14). 2. If there is any binding or pinching, correct problem. 3. Rotate screen in the opposite direction until it reaches its stop(see Figure 15). 4. If there is any binding ...