Chief CM6QH SERIES - Manuals

Page 2 - IMPORTANT WARNINGS AND CAUTIONS!; The Alert messages; Read all instructions before using this; compliance rating and make the unit illegal to operate.

CM6QH SERIES Installation Instructions 2 CSAV, Inc., and its affiliated corporations and subsidiaries (collectively, "CSAV"), intend to make this manual accurate and complete. However,CSAV makes no claim that the information contained herein covers all details, conditions or variations, nor ...

Page 3 - TOOLS REQUIRED FOR INSTALLATION; System Features and Installation Requirements; Features; Remote Control Activated Lutron Light Dimmer Module; Installation Requirements; 15VAC power at installation site

Installation Instructions CM6QH SERIES 3 TOOLS REQUIRED FOR INSTALLATION PARTS System Features and Installation Requirements Features Remote Control Activated Lutron Light Dimmer Module With this dimmer cabinet lighting can be switched on or off and dimmed using the left buttons on the hand held rem...

Page 4 - INSTALLATION; Installation; Secure track to top of cabinet.; Door Hanging Procedure; Doors should be made of a non-warping; Figure 1

CM6QH SERIES Installation Instructions 4 INSTALLATION Installation 1. Secure track to top of cabinet. 2. Align centerline on track with center of cabinet opening, andkeep the front of the track mounting flange flush with front ofthe cabinet. (See Firgure 2) 3. Secure Support Arms to the top of the c...

Page 5 - Figure 2

Page 6 - Figure 3

CM6QH SERIES Installation Instructions 6 Figure 3 Figure 4

Page 7 - Install Valance Clips; Figure 5; IR Sensor Placement; To install the optional dimmer:; Figure 6; System Activation; Figure 7; From Dimmer Module

Installation Instructions CM6QH SERIES 7 Install Valance Clips Three Valance clips are supplied to assist in hanging a valancein front of the track. (See Figure 5). Figure 5 IR Sensor Placement The placement of the IR sensor can be crucial to properoperation of the system. A flexible IR sensor is pr...

Page 8 - Figure 8; ADJUSTMENTS; Adjust Door Travel Distance; Figure 9; System Controls and Indicators; Learn Mode; Normal Doors At Rest -

CM6QH SERIES Installation Instructions 8 2. Plug Powercord into 115VAC outlet. IMPORTANT ! : A quality surge protection device is recommended. 3. Make sure nothing is obstructing movement of doors, 4. Press and release the Activator Button on the front of theMotor Box or the "Close Door button o...

Page 9 - Power Loss; Optional Control Input Connections; Control Input- 8 position RJ 45 modular phone jack; Control Input on Front of Motor Box

Installation Instructions CM6QH SERIES 9 track, or is the motor box bent, causing it to become uncoupledfrom the track? Power Loss - The Status Light will be on solid red. ---- There has been a power loss (due to an electrical storm, etc.). Whennext activated the doors will move at a slow speed to t...

Page 10 - Europe; Fellenoord 130 5611 ZB EINDHOVEN, The Netherlands; Asia Pacific

CM6QH SERIES Installation Instructions USA/International A 8401 Eagle Creek Parkway, Savage, MN 55378 P 800.582.6480 / 952.894.6280 F 877.894.6918 / 952.894.6918 Europe A Fellenoord 130 5611 ZB EINDHOVEN, The Netherlands P +31 (0)40 2668620 F +31 (0)40 2668615 Asia Pacific A Room 30I, Block D, Lily ...