Chief chief truss tilt adjustable mount - Manuals

Page 2 - DISCLAIMER; The TPP mount is designed for

TPP Series Installation Instructions 2 DISCLAIMER Milestone AV Technologies, and its affiliated corporations andsubsidiaries (collectively, "Milestone"), intend to make thismanual accurate and complete. However, Milestone makes noclaim that the information contained herein covers all details...

Page 3 - DIMENSIONS

Installation Instructions TPP Series 3 DIMENSIONS DIMENSIONS: INCHES

Page 4 - LEGEND

TPP Series Installation Instructions 4 LEGEND Tighten Fastener Apretar elemento de fijación Befestigungsteil festziehen Apertar fixador Serrare il fissaggio Bevestiging vastdraaien Serrez les fixations Measure Medir Messen Medir Misurare Meten Mesurer Phillips Screwdriver Destornillador Phillips Kre...

Page 5 - TOOLS REQUIRED FOR INSTALLATION; or; PARTS

Installation Instructions TPP Series 5 TOOLS REQUIRED FOR INSTALLATION REQUIRED PARTS (NOT INCLUDED) #2 (included) 5/32" 7/16" 7/16"9/16" 9/16" [TPK Truss/Pole Kit] (example) X 4 X 8 X 8 TPK-3 or TPK-4 or TPK-5 Backplate A (1) [TPP mount assembly] Tilt-adjustableplate C (1) (5/32...

Page 6 - INSTALLATION; Figure 1; Horizontal Installation; Figure 2

TPP Series Installation Instructions 6 INSTALLATION WARNING: Failure to provide adequate structural strength for this component can result in serious personal injury ordamage to equipment! It is the installer’s responsibility tomake sure the structure to which this component is attachedcan support f...

Page 7 - Figure 4; Vertical Installation; Figure 6; Display Installation; Make sure no power is supplied to the; Figure 7; Horizontal Configuration

Installation Instructions TPP Series 7 3. Re-attach backplate to tilt-adjustable plate/faceplateassembly using the four hex head cap screws (insertedfrom inside the tilt-adjustment plate). (See Figure 4) Figure 4 4. Securely anchor TPP assembly to horizontal poles usingChief TPK accessory clamps (no...

Page 8 - Figure 8; Security Lock; Tilt Adjustment

TPP Series Installation Instructions 8 1. Attach PSB interface bracket (B) to display using theinstructions included with the PSB package. 2. Using two people, slide display with attached interfacebracket (B) down over the four slots in the faceplate of theTPP (A). Make sure all four mounting button...

Page 9 - Removing the Display

Installation Instructions TPP Series 9 (Optional) Locking Angle Tilt Holes The TPP can be tilted up to 15 degrees, and features threeholes used to set specific tilt (0°, 5° and 10°). 1. Loosen tilt adjustment screws, adjust to desired tilt, andtighten tilt adjustment screws. (See Figure 11) 2. Insta...

Page 12 - Europe; Asia Pacific

TPP Series Installation Instructions Chief, a products division ofMilestone AV Technologies 8800-002566 Rev00 2014 Milestone AV Technologies www.chiefmfg.com 04/14 USA/International A 6436 City West Parkway, Eden Prairie, MN 55344 P 800.582.6480 / 952.225.6000 F 877.894.6918 / 952.894.6918 Europe A ...