Page 2 - NOTICE; See
TB0362A Page 2 of 14 05/28/10 SC-1000 / 1012 / 1022-10 SPECIFICATIONS AMPLIFIER INPUT POWER: 9-16 Volts DC, 8 Amps DC SIREN MODE OUTPUT POWER: 105 Watts RMS (15 VDC input, 100W speaker) SIREN FREQUENCY: 700Hz - 1500Hz Nominal CYCLE RATES: MECHANICAL - 5 cycles/min WAIL - 13 cycles/min YELP - 190 cyc...
Page 3 - emergency equipment.
TB0362A Page 3 of 14 05/28/10 INSTALLATION Proper installation of the unit is essential for years of safe, reliable operation. Please read all instruction before installing the unit. Failure to follow these instructions can cause serious damage to the unit or vehicle and may void warranties. SAFETY ...
Page 4 - - Turn this switch ON for a quicker mechanical tone fall time.
TB0362A Page 4 of 14 05/28/10 INSTALLER-SELECTABLE OPTIONS An internal 8-position DIP switch on the circuit board may be changed to select various options. Accessing Option Switches - the DIP switch is located just behind the front panel of the amplifier. Use a 7/64” allen wrench to remove the 4 cor...
Page 6 - Back of Unit; Enable Input must be connected; NEG; ELECTRICAL CONNECTIONS CONTINUED (ALL MODELS)
TB0362A Page 6 of 14 05/28/10 BAT + - Plug installed this orientation 6-P Terminal Block Plug (CP4956-06) RED #16G BLK #18G BRN #22G WHT 15A Automotive Type Fuse 25A Automotive Type Fuse Load 1 Load 2 Back of Unit Gauge see table Gauge see table On SC-1002 / 1012 Enable Input must be connected unles...
Page 7 - 0-P Terminal Block Plug; Front of Unit; Plug into unit first for
TB0362A Page 7 of 14 05/28/10 ELECTRICAL CONNECTIONS CONTINUED (SC-1012 only) Plug installed this orientation 10-P Terminal Block Plug (CP4688-10) Front of Unit LT1 and LT2 Lighted Rocker Switch Circuit LAMP A UTO MAN YELP MECH PHSR HORN LT1 LT2 NEG REMOTE PANEL Plug into unit first for terminal ide...
Page 8 - HAND; Plug hand control into unit
TB0362A Page 8 of 14 05/28/10 ELECTRICAL CONNECTIONS CONTINUED (SC-1022 only) Front of Unit HAND CONTROL Plug hand control into unit SC-1022 MAN LT1 MECH YELP HORN LT2 WAIL PHSR Note: Cable may be extended with ED1753 Hand Control Cable Extension Kit. Do not extend with other cables which may cause ...
Page 9 - OPERATION
TB0362A Page 9 of 14 05/28/10 OPERATION SC-1002 and SC-1012 Models Sound Hazard - Sound level from siren speaker (>120dBA @ 10 feet) may cause hearing damage. Do not operate siren without adequate hearing protection for you and anyone in immediate vicinity. (Ref. OSHA 1910.95 for occupational noi...
Page 11 - SERVICE; light comes on; RETURN
TB0362A Page 11 of 14 05/28/10 SERVICE This unit is designed to provide years of reliable service under even the worst conditions. Many times there may appear to be a problem with the unit when the true problem is in the speaker, controlled devices, or improper installation. The following chart show...
Page 12 - Button, Switch Cap Red; Accessory; Bracket, ‘U’ Dash Mount
TB0362A Page 12 of 14 05/28/10 SC-1002 PARTS Item Part # Description 1 CP4837 Button, Switch Cap Red 2 CP4989-02 Connector, 2-P terminal block 3 CP4957-06 Connector, 6-P header CP4739 Cover, extruded (does not include Front Panel or slide out Chassis) 4 CP4990-150 Fuse, 15 Amp Mini Automotive (Siren...
Page 13 - Cover, extruded (does not include Front Panel or slide out Chassis)
TB0362A Page 13 of 14 05/28/10 SC-1012 PARTS Item Part # Description 1 CP4989-02 Connector, 2-P terminal block 2 CP4957-06 Connector, 6-P header 3 CP4687-10 Connector, 10-P header CP4739 Cover, extruded (does not include Front Panel or slide out Chassis) 4 CP4990-150 Fuse, 15 Amp Mini Automotive (Si...