Cadet Softheat EBHN500- Manuals

Cadet Softheat EBHN500– User Manual in PDF format online.

Manuals:

User Manual Cadet Softheat EBHN500

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8

Summary

Page 2 - WIRING PROVISIONS / WIRING; Wiring is done on left side only.; A thermostat is required.; AREA OF INSTALLATION; Installation Instructions; Wa

WIRING PROVISIONS / WIRING This heating unit is designed for permanent installa-tion. All wiring should be routed in compliance withthe National Electrical Code and all local codes,where applicable. A maximum of No. 10 AWG wiremay be used with this heater. All wiring should beplanned and run before ...

Page 3 - THERMOSTAT; Maintenance; How To Operate Your Heater; How Softheat Hydronic Baseboards Work

THERMOSTAT For best results, use a Cadet wall thermostat or an EBKA 1-24 end cap DPST thermostat kit. It is recommend-ed that a thermostat be provided for each room. In extremely large rooms, a Cadet low-voltage thermostatwith double relays will give the most comfortable results. The location of the...

Page 4 - Warranty; Symptom; Troubleshooting Chart; These warranties do not apply:; Parts and Service

Warranty CONSULT LOCAL ELECTRICAL CODES TO DETERMINE WHAT WORK MUST BE PERFORMED BY QUALIFIED ELECTRICAL SERVICE PERSONNEL Gurgling noise Heater not working Liquid found in or around unit Room does not heat quickly Heater will not shut off 1. Unit may not be level 2. Unit may have developed a leak 1...

Cadet Manuals