Page 2 - Bushnell Digital Trail Sentry Features; a breeze in the field. The Trail Sentry is rugged and weatherproof.
Congratulations on your purchase of the Bushnell ® Digital Trail Sentry ™ Camera! This weatherproof, rugged trail camera is designed to record still images or movie clips of outdoor wildlife activity. This instruction manual will help you understand, setup, and use your Sentry to achieve the best po...
Page 5 - Digital Trail Sentry Specifications; Night Vision models only
5 Digital Trail Sentry Specifications Image Sensor .1 MP (Standard model) or 3.1 MP (Night Vision models) CMOS sensor Lens F/3.5, effective focal length 4mm. Sight range: 45 degrees Flash High power electronic Xenon Flash or IR LEDs (Night Vision models only, array of 0). Range: 45 ft. PIR Sensor Lo...
Page 6 - Glossary
6 Glossary PIR— Passive Infrared Sensor. Senses motion like typical security motion detector. Requires infrared energy (heat) in addition to motion to trip sensor to assure detection of live animals. Event— Any time that the PIR senses motion it counts it as an event. Events are recorded to the SD c...
Page 7 - Front of Camera; Control Panel; Detail
Parts Guide Front of Camera Control Panel Inside Front Button & Display Detail SD Card Slot LCD Display Setup, Menu & Power Buttons PIR PIR Detected (or Low Battery) LED Lock Tab Camera Lens StandardFlash LED IR Flash (NV Models only) 119204+119305 Trail Sentry 1LIM-7 7 3/3/08 11:51:14 PM
Page 8 - Setup and Operation Guide; change to “HHHH” with a blinking key icon below it (Fig
Setup and Operation Guide 1. Open the Sentry by pulling out on the two latches on the right side. Install 4 “D” cell batteries (flat base of all batteries contacting springs), and insert an SD card (not included, use any capacity from 16MB to 1GB. Do not substitute MMC cards.) in the slot to the rig...
Page 12 - The moon phase icon; Additional Notes
1 ABOUT THE PIR SENSOR The sensor that triggers the trail camera is Passive Infra Red, or PIR. Infrared energy is essentially heat energy. The PIR detector operates by sensing a change in the infrared level in its detection zone. This zone is a cone in the center 10 degrees of the camera’s field of ...
Page 13 - OPTIONAL ACCESSORIES FOR THE BUSHNELL TRAIL SENTRY
13 OPTIONAL ACCESSORIES FOR THE BUSHNELL TRAIL SENTRY Ratcheting Bracket ( Bushnell Model # 11-9650C ) An optional ratcheting bracket is available for all new Trail Sentry models included in this manual, providing an alternative mounting method. This bracket can be screwed to a tree, or secured to a...
Page 14 - : Do not uSe the solar panel unless rechargeable (“D” size type niMh)
Solar Panel (insert plug into camera input jack) Solar Panel Power Input Jack Solar Panel ( Bushnell Model # 11-9750C ) ( Compatible only with Trail Sentry Night Vision models and most Trail Scouts ) WARNING : Do not uSe the solar panel unless rechargeable (“D” size type niMh) batteries have been in...
Page 16 - For further questions or additional information please contact:
©2008 Bushnell Outdoor Products For further questions or additional information please contact: Bushnell Outdoor Products 9200 Cody, Overland Park, Kansas 66214 (800) 423-3537 • www.bushnell.com 119204+119305 Trail Sentry 1LIM-16 16 3/3/08 11:51:17 PM