Buhler 45 Series - Manuals

45 Series Rotary Tiller - 7 - SAFETY SIGN LOCATIONS – cont’d. Safety sign “A” Safety sign “B” Safety sign “C” REMEMBER - If Safety signs have been damaged, removed, become illegible or parts replaced without safety signs, new safety signs must be applied. New safety signs are available from your aut...

45 Series Rotary Tiller - 8 - OPERATION TO THE NEW OPERATOR OR OWNER The Buhler Farm King 45 Series Rotary Tiller is a machine that combines the primary and secondary tillage operation into one machine. It breaks up the soil and prepares the seed bed in one pass. Rotational power to the rotor is pro...

45 Series Rotary Tiller - 9 - MACHINE BREAK -IN Although there are no operational restrictions on the Tiller when used for the first time, it is recommended that the following mechanical items be checked: A. After operating for 1/2 hour or after completing 1/2 acre: 1. Check all nuts, bolts and othe...

45 Series Rotary Tiller - 10 - EQUIPMENT MATCHING To insure the safe and reliable operation of the Tiller, it is necessary to use a tractor with the correct specifications. Use the following list as a guide in selec ting a tractor to use on the machine. 1. Horsepower: Use Table 1 as a guide in selec...

45 Series Rotary Tiller - 11 - DRIVELINE DIMENSION A PTO driveline is supplied with the machine. To accommodate the variety of 3 point hitch geometry available today, the driveline can be too long for some machines and must be cut. It is very important that the driveline be free to telescope but not...

45 Series Rotary Tiller - 14 - FIELD OPERATION Buhler Farm King 45 Series Rotary Tillers are designed with the inherent flexibility of operating well in almost any kind of soil and terrain conditions. However, the operator has the responsibility of being familiar with all operating and safety proced...

45 Series Rotary Tiller - 17 - TRANSPORTING When transporting the machine, review and follow these instructions: 1. Be sure all bystanders a re clear of the machine. 2. Be sure that the machine is securely attached to the tractor and all retainer pins are installed. 3. Clean the SMV emblem, lights a...

45 Series Rotary Tiller - 18 - STORAGE After the season's use, the machine should be thoroughly inspected and prepared for storage. Repair or replace any worn or damaged components to prevent any unnecessary down time at the start of next season. To insure a long, trouble free life, this procedure s...

45 Series Rotary Tiller - 21 - SERVICING INTERVALS – cont’d. 40 Hours 1. Check gear box oil level. Add as required 2. Add approximately 10 squirts of grease in chain case. Annually 1. Change gear box oil. Refill with SAE 85W90 gear oil. 2. Wash machine.

45 Series Rotary Tiller -23- SLIP CLUTCH During normal operation, the slip clutch can release and slip when encountering an obstruction or when overloaded. It is designed to slip when the load exceeds 3 times its nominal rating. When the clutch slips too frequently during normal operating conditions...

45 Series Rotary Tiller -25- ASSEMBLY The machine is shipped with the PTO shaft not installed. To install the PTO driveline on the machine, follow this procedure: 1. Clear the area of bystanders, especially small children. 2. Clean the splines on the yoke and the input shaft. 3. Align the splines on...

45 Series Rotary Tiller -26- BOLT TORQUE CHECKING BOLT TORQUE The tables shown below give correct torque values for various bolts and cap screws. Tighten all bolts to the torques specified in chart unless otherwise noted. Check tightness of bolts periodically, using bolt torque chart as a guide. Rep...

45 Series Rotary Tiller -29- PARTS LIST WHEN ORDERING PARTS Always give your dealer the Model, Color and Serial Number of your machine to assist him in ordering and obtaining the correct parts. Use the exploded view and tabular listing of the area of interest to exactly identify the required part. 6...