Buffalo Technology WLI-TX4-AG300N - Manuals
Buffalo Technology WLI-TX4-AG300N – Manual in PDF format online.
Manuals:
Manual Buffalo Technology WLI-TX4-AG300N
Summary
2 Table of Contents I n t r o d u c t i o n . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 L a y o u t . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Wall Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 I n s t a l l a t i o n . . . . . . . . . . . . . . . . . . . ...
3 C ongratulations on your purchase! Your new Wireless Ethernet Converter allows you to connect any device with an Ethernet port to a wireless network. AOSS makes for effortless setup and our Nfiniti technology gives superb range and speed.This manual is designed to help you set up and use your Wire...
4 Layout LAN ports for PC, Game Console, or other Ethernet devices (up to 4) Power to Outlet, Surge Protector, or UPS
5 Wall Mounting 9.4 cm (~3.7 inches) 9.4 cm (~3.7 inches) F or wall mounting, screw three screws into the wall as shown below. Slots in the back of the Ethernet Converter will fit over these screws.
6 Installation To connect the WLI-TX4-AG300N Ethernet Converter to your wireless network, you'll need to configure it with your network's SSID, encryption type, and password. There are 3 different ways to do this: AOSS - If your wireless access point supports AOSS, then connecting the Ethernet Conve...
7 If your Wireless Router/Access Point supports AOSS, then AOSS can configure your wireless network for you. To configure your network with AOSS:• Power on the Wireless Router/Access Point and the Ethernet Converter. • Hold in the AOSS button on the Wireless Router/Access Point for 3 seconds. • Hold...
8 If you have a Windows PC available, then the Ethernet Converter Manager makes it simple to configure the Ethernet Converter. The following steps will guide you through configuring the Ethernet Converter via the Ethernet Converter Manager.Connect one of the Ethernet Converter's LAN ports to an open...
9 Step through the wizard to install the Ethernet Converter Manager. Installing the Ethernet Converter Manager
10 Once installed, you can open the Ethernet Converter Manager by clicking on Start-Programs-Buffalo- AirStation Utility-Ethernet Converter Manager . Opening the Ethernet Converter Manager Search Results will list all Buffalo Ethernet Converters on the network. If there is more than one Ethernet Con...
13 Click the dropdown arrow to change the a/g mode setting. 802.11a Preferred will connect to wireless-a networks if available, but will still connect to a wireless-g network if that's all that's available. 802.11g Preferred will connect to wireless-g networks if available, but will still connect to...
16 You may also enter the Web-based Configuration Tool without using the software. This may be necessary to configure the converter without the use of a Windows PC. Use this method with Linux, Macintosh, other other non-Windows PCs to access the Web-based Configuration Tool.Refer to your operating s...
18 The Web Based Configuration Tool lets you change the Ethernet Converter's configuration. Through Web Based Configuration, you can change the wireless network the Ethernet Converter is associated with, the IP address of the Ethernet Converter, and other important settings.After logging in on the p...
19 To connect the Ethernet Converter to a wireless network, enter the network's SSID, type of encryption, and key (password). Click Apply to connect. Connecting to a Wireless Network
21 Most users will never need to change any settings for their Wireless Ethernet Converter besides the basic ones in the main configuration window. If you're one of the exceptions, you may access Advanced Settings by clicking the Advanced tab at the top of the Home page. This is the Advanced Setting...
22 Initialization Initializing the Ethernet Converter returns it to default settings. This might be useful if you cannot access configuration settings, have lost the password to the Ethernet Converter, or desire to return the settings to the default factory settings.To initialize the device, use a t...
23 Bandwidth Switch The bandwidth switch allows you to choose whether the Ethernet Converter operates on a 20 GHz band or a 40 GHz band. X1 (20 MHz) is recommended for busy areas with many wireless channels in use. This setting will make the Ethernet Converter more resistant to interference from oth...
24 FCC Compliance Statement - This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment g...
25 EU Declaration of Conformity - This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC: - EN60950-1:2001...
26 This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in France, Italy and Belgium where restrictive use applies. France - This device may not be used for setting up outdoor radio links in France and in some areas ...
29 • The equipment that you have purchased has required the extraction and use of natural resources for its production. • The equipment may contain hazardous substances that could impact health and the environment. • In order to avoid the dissemination of those substances in our environment and to d...
30 Warranty Buffalo Technology (Melco Inc.) wireless products come with a two-year limited warranty from the date of purchase. Buffalo Technology (Melco Inc.) warrants to the original purchaser the product; good operating condition for the warranty period. This warranty does not include non-Buffalo ...
31 Contact Information North America Buffalo Technology USA Inc. 11100 Metric Blvd, Suite 750 Austin, TX 78758 GENERAL INQUIRIES Monday through Friday 8:30am-5:30pm CST Direct: 512-794-8533 Toll-free: 800-456-9799 Fax: 512-794-8520 Email: [email protected] TECHNICAL SUPPORT North American Techni...
32 Source code for Buffalo products that use GPL code is available at http://opensource.buffalo.jp. GPL Source Code
Buffalo Technology Manuals
-
Buffalo Technology HD-HSU2
Manual
-
Buffalo Technology WHR-G125
Manual
-
Buffalo Technology WLE-HG-NDR
Manual
-
Buffalo Technology HD-HSIU2
Manual
-
Buffalo Technology TS-RXL
Manual
-
Buffalo Technology WLI-U2-G300N
Manual
-
Buffalo Technology HS-D1.0TGL/R5
Manual
-
Buffalo Technology WLI3-TX1-G54
Manual
-
Buffalo Technology HD-HC750U2
Manual
-
Buffalo Technology HS-D2.0TGL/R5
Manual
-
Buffalo Technology HS-DGL Series
Manual
-
Buffalo Technology WLI-CB-AG108HP
Manual
-
Buffalo Technology WLI-CB-AG300NH
Manual
-
Buffalo Technology HS-DGL
Manual
-
Buffalo Technology Home Server
Manual
-
Buffalo Technology WLI-T1-S11G
Manual
-
Buffalo Technology HD-HC250U2
Manual
-
Buffalo Technology WLI-USB-KB11
Manual
-
Buffalo Technology LinkStation Pro
Manual
-
Buffalo Technology WLI-TX4-G54HP
Manual