Buffalo Technology WLI-T1-S11G - Manual
Buffalo Technology WLI-T1-S11G – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Bottom View Diagram; Front View Diagram
- Page 4 – Chapter 3 Detailed Setting
- Page 5 – Checking the AirSattion connection status; rm that the AirStation is indicated in black characters.; Setting the setting page password; eld and again in the [Password con; Setting the IP address of the WLI-T1-S11G; rm that the correct IP address is set.; Restoring the WLI-T1-S11G settings to the default values
- Page 6 – Product Speci; Notes
Ethernet Media Converter
WLI-T1-S11G
User’s Manual
1
Chapter 1 Before using WLI-T1-S11G
1.1
Introducing the Ethernet Media Converter - WLI-TI-S11G
The WLI-T1-S11G is an Ethernet Media Converter that can create a wireless connection for
a conventional Ethernet interface PC. A network printer and other network devices may also
achieve a convenient wireless connection with this product.
Features of the WLI-T1-S11G are:
• Comply with IEEE802.11b standard realizing 11Mbps wireless communication.
• Effective range reaches 50m (Indoor Case 1), 25m (indoor case 2) or 160m (outdoor)
under 11Mbps communication.
- Indoor Case 1: Of
fi
ce with few obstructions
- Indoor Case 1: Of
fi
ce with few obstructions
NOTE:
The effective range is adversely affected by the operating environment.
• Roaming allows you to connect to a network while mobile.
• 11 wireless channels lightnen network congestion
• Support for both 128(104)-bit and 64(40)-bit WEP. (Refer to “About WEP Encryption -
Recommendation of encrypted secure system” (P10)).
NOTE:
If you want to use 128(104)-bit WEP key, the access point must support
128(104)-bit WEP too. You cannot combine 128(104)-bit and 64(40)-bit WEP in the
wireless network.
• An AirStation access point is required for this product.
• Connecting a WLI-T1-S11G and a hub is not guaranteed for operate correctly
.
■
Required Environment
OS
• Windows XP/2000/ME/98/95/NT4.0
Web Browser
• Internet Explorer 4.0 or later
• Netscape Navigator 4.0 or later
NOTE:
A Web browser is required when you con
fi
gure this product from an HTTP
interface.
■
Contents of this package
WLI-T1-S11G
AC Adapter
International AC Adapters
LAN Cable (UTP straight)
Ethernet Converter CD
User’s Manual (this manual)
- Be sure to read additional information on the seperate sheet included with the product
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 3 Bottom View Diagram LAN Port DC Connector Ethernet LEDON: During wired linkBlinking: Communicating Wireless LED (Green)ON: During wireless linkBlinking: Communicating Front View Diagram Rear View Diagram INIT Switch Press to initialize the WLI-T1-S11G.Alternatively, each time the switch ispresse...
6 7 Step B4 Con fi guring the WLI-T1-S11G settings Con fi guring the WLI-T1-S11G settings via the AirStation. 1. Select [Start]-[Programs]-[AirStation Utility]-[Ethernet Converter]-[Ethernet Converter Manager]. Ethernet Converter Manager will be activated to automatically begin device searching. 2. ...
8 9 ■ Checking the AirSattion connection status You can check the connection between the PC and the AirStation with the WLI-T1-S11G connected.1. Install Ethernet Converter Manager2. Select [Start]-[Programs]-[AirStation Utility]-[Ethernet Converter]-[Ethernet Converter Manager].3. Select [Edit]-[Sea...
