Bryant TSTATBBPQ501 - Manuals

Bryant TSTATBBPQ501 – Manual in PDF format online.

Manuals:

Manual

Manual Bryant TSTATBBPQ501

Summary

Page 2 - Table Of Contents

Table Of Contents LOCATION OF CONTROLS DISPLAY NORMAL OPERATION Manual Thermostat Operation Time Period Operation CLOCK SET ADVANCED SETUP Page 1 3 4 5 6 8 PROGRAMMING Setup Overview Program Setup 7 9 16 SAFETY WARNINGS 2 BATTERY REPLACEMENT WARRANTY 18 19 Bryant Heating & Cooling Systems Patent...

Page 3 - Safety Warnings; WARNING; CAUTION

Safety Warnings Page 2 TSTATBBPQ501 CAUTION Follow Installation Instructions carefully. DISCONNECT POWER TO THE HEATER - AIR CONDITIONER BEFORE REMOVINGTHE OLD THERMOSTAT AND INSTALLINGTHE NEW THERMOSTAT. WARNING The 2 Alkaline “AA” batteries must be replaced at least every 12 months to assure prope...

Page 4 - Location of Controls; MODE SWITCH

Location of Controls Page 3 72 72 I2:00 SET AM Tu MODE SWITCH On or Auto FAN SWITCH UP & DOWNBUTTONS HEAT/COOLINDICATOR Heat, Cool or Off PROGRAM SWITCH RUN program Program OFF SET program NEXT BUTTON For programming For programming How to Use: The Next button is used to advancefrom one step to ...

Page 5 - Display; MTuWThF; Morning

Display Page 4 88 88 I2:00 SET PM AM MTuWThF SaSuHeatCool Morning Evening Night Day Day of the week. When programming, MTuWThFrepresents the 5 weekdays, SaSu represent the2 weekend days. Heat and Cool indicators. In normal operation, Heator Cool appears, reflecting the mode switch position. Clock Di...

Page 6 - Normal Operation; Manual Operation; On or Auto

Page 5 Normal Operation 72 72 I2:00 SET AM Tu Manual Operation (program switch OFF) Select heat or cool with the mode switch.Normally leave the fan switched to auto. In fan auto, the fan will turn on only with a heat or cool demand. When Fan On is selected, the fan will run continuously.Adjust the d...

Page 7 - Programmed Operation; FAN SWITCH

Normal Operation Page 6 72 72 I2:00 SET AM Tu MODE SWITCH Programmed Operation (program switch RUN) Select heat or cool with the mode switch.Normally leave the fan switched to auto. In fan auto, the fan will turn on only with a heat or cool demand. When Fan On is selected, the fan will run continuou...

Page 8 - Clock Set; Slide the program switch to the SET position.

Page 7 Clock Set 6:00 PM NEXT Use these buttons toadjust the current time. Use these buttons toadjust the current day. Su Slide the program switch to the SET position. 6:00 PM Pushing and holding the Up or Down buttons will slew the time by 10s of minutes. Press the NEXT button for 5 seconds to ente...

Page 9 - Time Period; Programming; PROGRAM SWITCH; Overview

Page 8 Time Period Programming Program Switch RUN OFF SET PROGRAM SWITCH Overview Slide the program switch to the SET position. The blinking icon(s) on the display may be changed by pressing the Up or Down buttons.After the blinking icon is changed how you want it, press the Next button.The next ico...

Page 10 - Next Page; Weekday

Page 9 Time Period Programming Slide the program switch to the SET position. The 1st 2 steps are clock and day set, see page 7. Program RUN OFF SET Next Page 6:00 AM MTuWThF Morning NEXT Use these buttons toadjust the start time forthe morning time period. 78 6:00 SET AM MTuWThF Cool Morning NEXT Us...

Page 13 - Weekend

Page 12 Time Period Programming Next Page SaSu Use these buttons toadjust the start time forthe morning time period. 6:00 Morning AM NEXT 78 SET SaSu Cool Use these buttons toadjust the cool setpoint forthe morning time period. 6:00 Morning AM NEXT 70 6:00 SET AM SaSu Heat Morning Use these buttons ...

Page 16 - Time Period Programming

Page 15 Time Period Programming Program Switch RUN OFF SET After completion of setting the time periodprogramming, you have 2 options:1) Run the time period program by sliding the Program Switch to the RUN position. Or,2) Do not run the time period program. The thermostat will operate as a manual he...

Page 17 - Advanced Setup; This is normally done by the installer at initial installation.; L I; Yes

Page 16 Advanced Setup This is normally done by the installer at initial installation. Use these buttons toadjust the deadbandfrom 1 to 6 degrees. Use these buttons toadjust the cycles/hourfrom 2 to 6.d=no limit (zoning)d1=d+no compressorlockout. Enter advanced setup by adjusting the program switch ...

Page 18 - To Open The Thermostat

Page 17 Battery Replacement The top of the thermostat housing has two (2) screw-driver slots to assist when seperating. Repeat the procedure in the other screw driver slot. Separate the housing halves by pulling the top forward until the pins release, and then lift the bottomout. To pull the housing...

Page 19 - Battery Replacement

Page 18 Battery Replacement REPLACE WITH ALKALINE BATTERIES AT LEAST ONCE EVERY YEAR, OR WHEN THE “LOW BATTERY” ICON APPEARS (pages 2,17). USE “AA” SIZE ALKALINE BATTERIES USE “AA” SIZE ALKALINE BATTERIES POSITION BATTERIES AS SHOWN E L E C G A S H P G A S IF THE THERMOSTAT IS CONNECTED TO 24V POWER...

Page 20 - Warranty

Page 19 Warranty THIS WARRANTY DOES NOT INCLUDE LABOR OR OTHER COSTS incurred for diagnosing, repairing, removing, installing, shipping, servicing or handling of either defective parts or replacement parts. Such costs may be covered by a separate warranty provided by the installer. THIS WARRANTY APP...

Page 21 - Programming Worksheet; see page 8; DAY

Programming Worksheet see page 8 Printed on recycled paper.P/N 88-403 Rev. 2 DAY PERIOD HEAT START TIME COOL Morning Morning Day Day Evening Evening Night Night MondayTuesdayWednesdayThursdayFriday SaturdaySunday Please be certain to program each time period in chronological order to ensure proper p...