Bryant TSTATBBNB001 - Manuals

Page 2 - Table Of Contents; CAUTION; Follow; Residential Light Commercial Systems Carrier Corporation 04/01

Table Of Contents FRONT PANELDISPLAYBASIC OPERATIONADVANCED SETUPABOUT ADVANCED OPERATIONWARRANTY Page 1 CAUTION Follow Installation Instructions before proceeding. SET THERMOSTAT TO MODE “OFF” PRIOR TO CHANGING SETTINGS IN SETUP OR RESTORING FACTORY DEFAULTS. TSTATBBNB001 2 3 46 1013 Residential Li...

Page 3 - Front Panel; Liquid Crystal Display; with Thermoglow; Mode Button

AUTO C OOL 74 H EAT 72 72 Front Panel Page 2 Liquid Crystal Display with Thermoglow Up/Down Buttons Mode Button Fan Button Heat or Cool Indicator Heat = Red, Cool = Green 1 2 3 4 5 5 1 2 3 4

Page 4 - Display; is not lit - indicates the fan will

Page 3 1 3 2 Mode Indicators Selects the operation mode of the equipment. HEAT - indicates the heat mode. COOL - indicates the air conditioning mode. AUTO - indicates the system will automatically changeover between heat and cool modes as the temperature varies. OFF - indicates the entire system is ...

Page 5 - Select Mode; Basic Operation

Page 4 The HEAT setting indicates the temperature the room has toreach before the furnace will turn on to heat the room. The COOL setting indicates the temperature the room has to reach before the air conditioner will turn on to cool the room. OFF indicates both heating and air conditioning systems ...

Page 6 - Select Desired Temperature

Page 5 buttons. In any mode, adjust the desired Set Temperature with Pressing the Up or Down buttons in Auto mode will adjust both the heat and cool set temperatures simultaneously.Pressing the Up or Down buttons in Heat or Cool modes will adjust only the heat or cool set temperature. Select Desired...

Page 7 - Advanced Setup; hp

Advanced Setup Page 6 Press Press Press Continued Press the Mode button.While holding the Mode,press the Fan buttonfor 5 seconds to enter Setupscreens. NOTE: Each step # is located at the top right corner of the display for easy reference. FAN MODE MODE MODE MODE Select residential Heat Pump,ON or O...

Page 8 - eh; cy

Advanced Setup Page 7 Press Press Press Press Continued Select Electric Heat Onor Off. (Step 6 only appears if heat pump is off in step 4) Adjust the deadbandfrom 1 - 6 degrees. Adjust the minimum difference between cooling & heatingsetpoints. (0 - 6 ) MODE MODE MODE MODE OFF 6 eh 7 2 C OOL 8 H ...

Page 9 - l i

Advanced Setup Page 8 Press the Mode button. While holding the Mode, press the Fan button for 2 seconds to leave the Setup screens. If no buttons are pressed, the display will leave the setup screens after 30 seconds. Press Press Select the display back-light always On , or Off after 8 seconds. On O...

Page 10 - Advanced Setup Table

Advanced Setup Page 9 Step # Description Range Factory Default 2 Display Type Dual (2) or Single (1) 1-2 24 Heat Pump Off / On Off5 Reversing Valve polarity O / B O6 Electric Heat Off / On Off7 Deadband or Temperature swing 1 - 6 28 Forced minimum difference heat/cool 0 - 6 29 Cycles per hour d, d1,...

Page 11 - About Advanced Features & Operation; and; the setpoint; step; Press for; EH

About Advanced Features & Operation Page 10 2 STAGE OPERATION - The 2nd Stage of heat or cool is turned on when ( 1 ) the 1st Stage has been on for a minimum of two minutes, and ( 2 ) the temperature spread from the setpoint is equal to or greater than: the setpoint plus the deadband, plus 2 deg...

Page 12 - ELECTRIC HEAT - Selecting Electric Heat on,; Press all 3 for; unlock

About Advanced Features & Operation Page 11 ELECTRIC HEAT - Selecting Electric Heat on, page 7, step 6 , will cause the thermostat to turn on the fan any time there is a heat demand. Since all control the fan, this feature should be off is only electric. immediately gas furnaces unless the heate...

Page 13 - Both; appears. This resets all factory settings.; To calibrate; press the Mode button once more.

About Advanced Features & Operation Page 12 DUAL SETPOINT BEHAVIOR - The adjustable setpoint range is: 35 - 99 degrees in Fahrenheit and 7 - 35 degrees in Centigrade. When in the modes Heat or Cool, this adjustable range is unhampered. When adjusting any Auto mode, including programming Occupied...

Page 14 - Warranty

Warranty Page 13 Five-Year Warranty - This Product is warranted to be free from defects in material and workmanship. If defect appears within five years from the date of original installation, whether or not actual use begins on that date, then the product does meet this warranty. A new orremanufact...