Brio CLBL320SCP - Manuals - manualsarea.com

Page 2 - Table of Contents

2 Table of Contents Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Intended Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

Page 3 - Safety Information

3 Safety Information WARNING: To reduce risk of injury and property damage, you must read this entire guide before assembling, installing and operating the dispenser. WARNING: This product dispenses water at very high temperatures. Failure to use properly can cause personal injury. When operating th...

Page 5 - Installation; Determine Installation Location; Install the Drip Tray and Grid

5 Indicator Panel Description 1 . Power indicator light – When illuminated, indicates that the dispenser is on. 2 . Hot water indicator light – When illuminated, indicates that the dispenser is heating water. 3 . Cold water indicator light – When illuminated, indicates that the dispenser is cooling ...

Page 6 - Install a Water Bottle

6 3 . Install a Water Bottle IMPORTANT: To prevent dry heating, do not turn on the heating and cooling switches until you complete the steps in this procedure. NOTE: This dispenser is compatible with 3-gallon water bottles. It is recommended that you purchase water bottles equipped with a 55-millime...

Page 7 - Operation; Turn the Dispenser On/Off; Dispense Cold Water; Dispense Hot Water and Activate Child Safety Lock; Change the Water Bottle

7 Operation IMPORTANT: This unit has been tested and sanitized prior to packing and shipping. During transit, dust and odors can accumulate in the tank and lines. Dispense and dispose at least one quart of water prior to drinking any water. Turn the Dispenser On/Off IMPORTANT: Before you turn the di...

Page 8 - Troubleshooting; Cleaning and Maintenance; Cleaning

8 Troubleshooting Problem Solution The cold water is not cold. • It takes up to one hour after setup to dispense cold water. • Make sure the power cord is properly connected to a working outlet. • Make sure the back of the dispenser is at least 20 cm from a wall and there is free airflow on all 20 c...

Page 9 - Clean the Reservoirs

9 Clean the Reservoirs The reservoirs should be cleaned every 3 to 4 months to remove mineral buildup and optimize dispenser performance. 1 2 F . Remove the bottle support collar (1) from the top of the dispenser, then the white separator (2) covering the cold water reservoir. Dampen the cloth with ...

Page 10 - Warranty

10 Warranty Brio (“Vendor”) warrants to the original purchaser of the Brio Water Coolers (the “Product”), and to no other person, that if the Product is assembled and operated in accordance with the printed instructions accompanying it, then for a period of one (1) year from the date of purchase, al...

Page 11 - Contact Us