Brio CLPOU720UVRO4 - User Manual

Page 2 - Table of Contents

2 2 Table of Contents Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Intended Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

Page 4 - Product Features; Product Dimensions

4 4 Product Features 1 2 35 678 9 10 4 11 13 15 14 12 16 Part Description Part Description 1 Touch panel display 9 RO pump 2 Water tap 10 Filter reset switch 3 Drip tray 11 Cold water switch 4 Filter cabinet 12 Hot water switch 5 Sediment filter 13 Condenser 6 Carbon block filter 14 Drain outlet 7 R...

Page 5 - Touch Panel Description; Package Contents; Materials Needed

Touch Panel Description 1 . Up arrow button – Press to set the time on the clock and increase temperature settings. 2 . PCB indicator – Indicates the PP+C1+C2 filter lifetime. 3 . RO indicator – Indicates the RO filter lifetime. 4 . Clock/Temperature display – Shows the time and water temperature se...

Page 6 - Installation; Determine Installation Location

6 6 Installation 1 . Determine Installation Location A . Place the dispenser upright. B . Locate the dispenser on a hard and level surface in a cool shaded location near a grounded wall outlet. NOTICE: Do NOT plug in the power cord until the entire installation section is completed. C . Position the...

Page 7 - Make the Reverse Osmosis Waste Connections

E . Gently tug on the tube (B) to ensure a secure connection with the feed water adapter (E). E B 3 . Make the Reverse Osmosis Waste Connections The “RO” filter assembly requires a drain line connection to be installed, which removes rejected water to the sewer. The drain saddle connects the drain l...

Page 8 - Flush the Filters

8 8 4 . Flush the Filters IMPORTANT: Follow this procedure every time you replace your filters. IMPORTANT: Ensure the water supply is off before you begin. A . Connect a filter (D) to the filter housing (C) by twisting the filter (D) clockwise. C D B . Connect the tip of the shut-off valve tube (B) ...

Page 9 - Install the Filters and Complete the Installation

5 . Install the Filters and Complete the Installation A . After flushing, twist each filter (D) clockwise into the filter housings located inside the dispenser cabinet. The sediment filter goes on the left, followed by the carbon, RO, and post carbon filter. D B . Remove the safety plug from the wat...

Page 10 - Operation; Turn the Dispenser On/Off

10 10 Operation IMPORTANT: This unit has been tested and sanitized prior to packing and shipping. During transit, dust and odors can accumulate in the tank and lines. Dispense and dispose at least one quart of water prior to drinking any water. Turn the Dispenser On/Off IMPORTANT: Before you activat...

Page 11 - Dispense Hot Water and Activate Child Safety Lock; Troubleshooting

Dispense Hot Water and Activate Child Safety Lock CAUTION: This unit dispenses water at temperatures that can cause severe burns. Avoid direct contact with hot water. Keep children and pets away from the unit while dispensing. Never allow children to dispense hot water without proper and direct supe...

Page 12 - Cleaning and Maintenance; Care and Maintenance

12 12 Cleaning and Maintenance The UV icon on the upper-right corner of the display will begin blinking, indicating the cleaning process is underway. Care and Maintenance • Keep this dispenser in a dry and cool place and avoid direct sunshine. • Ensure the back of the dispenser is at least 20 cm (8 ...

Page 14 - Warranty

14 14 Warranty Brio (“Vendor”) warrants to the original purchaser of the Brio Water Coolers (the “Product”), and to no other person, that if the Product is assembled and operated in accordance with the printed instructions accompanying it, then for a period of one (1) year from the date of purchase,...

Page 16 - Contact Us