Brinkmann Series 2630 - Manuals

4 • Never use your grill without leak testing all gas connections and hoses. See the section on“Leak Testing” in this manual for proper procedures. • Visually inspect the hose assembly prior to each use for evidence of damage, excess wear ordeterioration. If found, replace the assembly before using ...

LEAK TESTING: To prevent fire or explosion hazard: • DO NOT smoke or permit ignition sources in the area while conducting a leak test. • Perform test OUTDOORS only in a well ventilated area. • Never perform a leak test with a match or open flame. • Never perform a leak test while the grill is in use...

WARNING 6 6. Check each place listed (A -G) for growing bubbles which indicates a leak. 7. Turn OFF gas supply at natural gas supply. 8. Turn on control knobs to release gas pressure in hose. 9. Turn control knobs to OFF position. 10. Tighten any leaking connections. 11. Repeat soapy water test unti...

LIGHTING INSTRUCTIONS: Follow the instructions exactly. 1. OPEN THE GRILL LID before attempting to light a burner so that fumes do not accumulate inside the grill. An explosion could occur if grill lid is down. 2. Check that all burner control knobs and the natural gas supply are turned to the OFF p...

LIGHTING THE SIDE BURNER: 1. Open lid to the side burner before lighting. 2. Turn on the side burner by pressing in and rotating the control knob to the HIGH position. 3. Press and hold the igniter button on the main control panel for 3-5 seconds until the burner ignites. 4. If burner does not ignit...

9 OPERATING THE GRILL: Never use Charcoal or Lighter Fluid inside your Natural Gas Grill. Read and follow all warnings andinstructions contained in the preceding sections of this manual. BREAKING IN YOUR GRILL: • In manufacturing and preserving the components of your grill, oil residue may be presen...

ROTISSERIE COOKING: • Your grill was pre-drilled from factory to include mounting holes for a Brinkmann rotisserie (soldseparately). Do not use a rotisserie not specifically manufactured for this grill. • Read and follow all instructions provided with the rotisserie. Save instructions for future ref...

TRANSPORTING AND STORAGE: • Never move a grill when it is hot or when objects are on the cooking surfaces. • Make sure that natural gas supply is shut off. After moving the grill check that all gasconnections are free of leaks. Refer to instructions for leak test on page 5 of this manual. • DO NOT s...

BURNER ASSEMBLY/MAINTENANCE • Although your burners are constructed of cast iron, they may rust as a result of the extreme heat andacids from cooking foods. Regularly inspect the burners cracks, abnormal holes, and other signs ofcorrosion damage. If found, replace the burner. • DO NOT obstruct the f...

14 • To protect your grill from excessive rust, the unit must be kept clean and covered at all times when not inuse. A grill cover may be ordered directly from Brinkmann by calling 1-800-468-5252 or 1-800-527-0717. • Wash cooking grills and heat shields with hot, soapy water, rinse well and dry. Lig...

15 ASSEMBLY INSTRUCTIONS READ ALL SAFETY WARNINGS & ASSEMBLY INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR OPERATING YOUR GRILL. WE RECOMMEND TWO PEOPLE WORK TOGETHER WHEN ASSEMBLING THIS UNIT. The following provided tools are required to assemble this Brinkmann Pro Series 2630 Grill: • Flathead S...

17 4 M6 X 12mm bolts 8 M6 X 20mm bolts 14 M6 X 60mm bolts 1 AA /1.5V Alkaline battery PARTS CARD CONTENTS Make sure you have all items listed under PARTS LIST and PARTS BAG CONTENTS before you begin the installation process. Your Parts Bag will include: M6 X 12mm bolts M6 X 20mm bolts M6 X 60mm bolt...

19 Step 4 Attach back cart panel by using sixM6 X 60mm bolts. Note: Leave bolts hand tight until Step 11. Step 5 Install door bracket using the four#10 X 1/2” self taping screws. Makesure door stop is set toward back ofcart. Step 6 Insert right side door, placing lowerpivot into the pivot hole on bo...

21 Step 9 Attach side burner assembly to grillbody assembly by inserting fourM6 X 20mm bolts through theholes in the side burner assemblyand into holes of grill bodyassembly. Tighten all four bolts.Install side burner grate and controlknob. Step 10 Remove the plastic cap on gassupply manifold and at...

24 Step 18 Place the stainless steel heatshields on lower level of grill bodyassembly directly above burners. Step 19 Place stainless steel cooking grillson support ribs directly abovestainless steel heat shields. Step 20 Place warming rack in slots abovestainless steel cooking grills. OFF HIGH LOW ...

PROFESSIONAL SHISH-KABOB SKEWERS These heavy-duty, 18" shish-kabob skewers are extra-long for fabulousrestaurant style kabobs. Made of rust resistant stainlesssteel to last for years. SET OF 12812-2904-0 ACCESSORIES 25 RIB RACK Chrome-plated rack can greatly increase the cookingcapacity of your ...

ACCESSORIES LOOK FOR THESE AND OTHER BRINKMANN ACCESSORIES AT YOUR LOCAL RETAILER WHERE SMOKERS ARE SOLD, OR ORDER DIRECT BY CALLING 1-800-468-5252. THE ULTIMATE 5-PIECE BBQ TOOL SET You’ll be the envy of your fellow outdoor chefs withthis ultimate BBQ tool set. It’s sleek ergonomicdesign combined w...

10/03140-2630-0 WARRANTY ©2002 The Brinkmann Corporation Dallas, Texas 75244 U.S.A www.brinkmanncorp.com The Brinkmann Corporation warrants to the original purchaser that the Brinkmann Stainless Steel Pro Series 2630 TM is free from defects due to workmanship or materials for: Stainless steel and di...