Page 2 - Contents; BREVILLE; IMPORTANT; Limited Product
2 2 Breville Recommends Safety First 2 Limited Product Warranty 8 Components 11 Assembly 14 Functions 15 Tips 17 Care & Cleaning 19 Troubleshooting Contents BREVILLE ® RECOMMENDS SAFETY FIRST At Breville we are very safety conscious. We design and manufacture consumer products with the safety of...
Page 6 - WARNING
FOR HOUSEHOLD USE ONLY SAVE THESE INSTRUCTIONS EN 6 • This appliance is for household use only. Do not use this appliance for anything other than its intended use. Do not use in moving vehicles or boats. Do not use outdoors. Misuse may cause injury. • The processing blades and discs are extremely sh...
Page 8 - Components
8 A. Small pusher cap The small pusher cap functions as a cover of the smaller feed chute. B. Small food pusher For improved processing control of smaller ingredients. It also doubles as a measuring cup. The food processor will run continually whether the small pusher is in or out. C. Large food pus...
Page 9 - TIP
9 1. Dicing Blade To be used with the dicing grid for dicing in cubes. 2. Dicing Grid To be used with the dicing blade for dicing in cubes. 3. Dicing Cleaner Use to clean dicing grid. 4. Main Spindle Attaches to blade or discs. 5. Dicing Gearbox Use with the dicing kit. 6. Reversible Shredder Use on...
Page 10 - DETACHMENT OF ACCESSORIES
10 DETACHMENT OF ACCESSORIES • Accessories all have a place in the caddy which has been color coordinated. • All accessories can be accessed independently of each other.
Page 11 - Assembly
11 ASSEMBLY Motor Base and Bowl1. Position the processing bowl onto the motor base with the handle in line with the ALIGN HANDLE graphic on the motor base. 2. Turn the bowl clockwise until the handle locks to the front. The processing bowl should now be securely locked into position. The food proces...
Page 14 - Functions; OPERATION
14 After ProcessingWait until the blades or discs have stopped moving before unlocking the lid. Ensure that the unit has been turned off using the POWER button and unplug from the power outlet before handling the blades.When removing the blades or discs, lift the part by carefully gripping the plast...
Page 15 - Tips
15 Tips listed below are suggestions only. For more detailed instructions, refer to specific recipes provided online at breville.com ACCESSORY ACTION TYPES OF INGREDIENTS / DISHES TIPS S Blade™ Chop • Raw fruits and vegetables• Raw or cooked meats and fish• Fresh herbs• Breadcrumbs• Nuts• Dried frui...
Page 16 - NOTE
16 IMPORTANT NOTES For optimal results, use the chute size appropriate to the food to be processed, position food in the chute and use the pusher to push food with light downward force prior to starting the food processor. PressureWhen processing, never force the food down the chute as this can dama...
Page 18 - NOTES
18 Cleaning the Dicing Grid NOTES • Ensure dicing blade has been removed first.• The dicing grid must remain correctly assembled to the bowl prior to using the dicing cleaner. • The dicing gearbox can remain inside the bowl and grid. 1. Take cleaner out of caddy and flip up handle2. Align and then i...
Page 19 - Troubleshooting
19 PROBLEM EASY SOLUTION Food is unevenly processed • Ingredients should be cut evenly into 2.5 cm pieces before processing.• Ingredients should be processed in batches to avoid overloading. Slices are slanted or uneven • Apply even pressure on the pusher. Food falls over in the feed chute • There a...
Page 21 - Right Side View
21 ATTACHMENT OF CADDY COMPONENTS Attachment of caddy only after all the accessories have been removed. Refer to this instructions for: • If dropped and fallen apart. ATTACHMENT Blade Clips1. Locate correct side of caddy (dough blade or chopping blade) and correct blade clip. 2. Insert blade clip sp...
Page 23 - Notes
Page 24 - Breville Service Centre
BFP638 ANZ WEBONLY - B23 Breville, the Breville Logo, Barista Express and Temp Control are trademarks of Breville Pty Ltd (“Breville”) and Breville's products are distributed in Australia and New Zealand under license. Copyright Breville Pty. Ltd. 2023. Due to continued product improvement, the prod...