Bosch THE DCN - Manuals

SC & SI Remote Interface Description en | 6 Bosch Security Systems B.V. | 2003 December | SC & SI Remote Interface Description 3 System Configuration Functions 3.1 Introduction The system configuration functions described in this section are needed to query the set-up of the DCN-system from ...

SC & SI Remote Interface Description en | 10 Bosch Security Systems B.V. | 2003 December | SC & SI Remote Interface Description • DCNC_UNIT_CHAIRMAN • DCNC_UNIT_DELEGATE_CARD • DCNC_UNIT_INTERPRETER • DCNC_UNIT_DUAL_MIC • DCNC_UNIT_PC • DCNC_UNIT_DATA_COMM • DCNC_UNIT_CCU_CONTROL • DCNC_UNIT...

SC & SI Remote Interface Description en | 15 Bosch Security Systems B.V. | 2003 December | SC & SI Remote Interface Description 4 System Configuration notifications 4.1 Introduction This chapter defines the set of update notifications concerning SC send by the CCU. 4.1.1 Update Notification ...

SC & SI Remote Interface Description en | 16 Bosch Security Systems B.V. | 2003 December | SC & SI Remote Interface Description Single-Multi System , i.e. a Multi CCU system but one or more of the Slave CCU’s configured to run in Single Mode Event Update Notification Continue with remote fun...

SC & SI Remote Interface Description en | 17 Bosch Security Systems B.V. | 2003 December | SC & SI Remote Interface Description 4.2 SC_C_CCU_REBOOT Purpose Notifies the remote controller that the CCU has restarted. This notification is always send at start-up of the CCU and is the only notif...

SC & SI Remote Interface Description en | 18 Bosch Security Systems B.V. | 2003 December | SC & SI Remote Interface Description 4.6 SC_C_DISCONNECT_SLAVE_CCU Purpose Notifies the remote controller that the master-CCU has lost connection to one of his slave-CCU’s. Along with this notification...

SC & SI Remote Interface Description en | 19 Bosch Security Systems B.V. | 2003 December | SC & SI Remote Interface Description 5 System Installation Functions 5.1 Introduction The system installation functions provide functionality to connect unit identification with the seat numbers used w...

SC & SI Remote Interface Description en | 20 Bosch Security Systems B.V. | 2003 December | SC & SI Remote Interface Description Note that: Upon communication loss this function will be activated, if SI_C_START_INSTALL was activated. Availability This function is available in CCU system mode ...

SC & SI Remote Interface Description en | 21 Bosch Security Systems B.V. | 2003 December | SC & SI Remote Interface Description Error codes returned SI_E_NOERROR SI_E_FAILED SI_E_INVALID_UNITTYPE Related functions SI_C_START_INSTALL SI_C_STOP_INSTALL 5.5 SI_C_SET_MASTER_VOL Purpose To set th...

SC & SI Remote Interface Description en | 22 Bosch Security Systems B.V. | 2003 December | SC & SI Remote Interface Description 6 System Installation notifications 6.1 Introduction This chapter defines the set of update notifications concerning SI send by the CCU. Each description is accordi...

SC & SI Remote Interface Description en | 23 Bosch Security Systems B.V. | 2003 December | SC & SI Remote Interface Description APPENDIX A. VALUES OF THE DEFINES In this document a lot of definitions are given, which have values connected to them. In this appendix all defines will be connect...

SC & SI Remote Interface Description en | 25 Bosch Security Systems B.V. | 2003 December | SC & SI Remote Interface Description APPENDIX B. ERROR CODES Responses returned upon a remote function request contain an error field (‘wError’). In this appendix an overview is given of the possible e...

SC & SI Remote Interface Description en | 26 Bosch Security Systems B.V. | 2003 December | SC & SI Remote Interface Description Database Query Services Error code Value Explanation The use of function SC_C_CCU_APPLY_ONE is not possible, because currently there is no database present in the C...

SC & SI Remote Interface Description en | 27 Bosch Security Systems B.V. | 2003 December | SC & SI Remote Interface Description APPENDIX C. EXAMPLES In the examples below the remote functions and update notifications, that are defined in this document as constant values for the wFnId paramet...

SC & SI Remote Interface Description en | 28 Bosch Security Systems B.V. | 2003 December | SC & SI Remote Interface Description if (error != SI_E_NOERROR) { /* do error handling */ } This ends the global seat assignment. The remote controller has now a complete list of all seats and their co...

SC & SI Remote Interface Description en | 30 Bosch Security Systems B.V. | 2003 December | SC & SI Remote Interface Description APPENDIX D. ERROR CODES Responses returned upon a remote function request contain a error field (‘wError’). In this appendix an overview is given of the possible er...