Bosch CISS - Manuals

In case you are using Windows 7/8, please install the CISS Driver for Windows (not needed for Windows 10 or Linux environments). The driver and corresponding instructions are available at: https://www.bosch-connectivity.com/media-and-downloads/ (CISS Driver Installer Windows / CISS Driver Installer ...

Note: Changes or modifications not expressly approved by Bosch Connected Devices and Solutions GmbH could void the FCC certificate and therefore user’s authority to operate the equipment.” Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant...

Restrictions of use CISS housing is not to be opened or tampered with. CISS is designed for use within environmental conditions as further detailed in this operating instructions. It is the customer’s responsibility to validate and test any use or operation under deviating environmental conditions. ...

Bosch Connected Devices and Solutions GmbH Ludwig-Erhard-Straße 2 72760 Reutlingen Germany bosch-connectivity.com

9 | CISS-R2 english Robert Bosch GmbH 0274VM0944 v1.3 | 01.2017 deutsch 6 I CISS-R2 0274VM0944 v1.3 | 01.2017 Robert Bosch GmbH EG-Konformitätserklärung Hersteller: Robert Bosch GmbH Tübinger Straße 123 72762 Reutlingen Produkttyp: Connected Industry Sensor Solution Bezeichnung: CISS-R2 Hiermit erkl...

1.6 Technical Specifications Name Value Temperature (operating) -20 – 60 °C (with battery); -20 – 85 °C (without battery) Temperature (charging) 0 – 40 °C Storage Temperature Range -20 – 60 °C Humidity 10 – 90 %, non-condensing Air Pressure 50 – 110 kPa (with battery); 30 – 110 kPa (without battery)...

Robert Bosch GmbH 0274VM0944 v1.3 | 01.2017 english 1 2 | CISS-R2 0274VM0944 v1.3 | 01.2017 Robert Bosch GmbH 2.3.3 PC Communication channel: USBOptions: Firmware update, measurement data transmission 2.3.4 Firmware Update A corresponding firmware file is necessary for each CISS applica- tion. This ...

english 1 4 | CISS-R2 0274VM0944 v1.3 | 01.2017 Robert Bosch GmbH FCC Statement of Conformity NOTICE:This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interfe...

Bosch Connected Devices and Solutions GmbH CISS Demo Python Script / Operating Instructions v2.0 3.1 Set the USB Port The parameter port is used to set the USB port. • Example in Windows: port = COM4 • Example in Linux: port = /dev/ttyACM0 In windows please open the Device Manager to check the COM p...

Bosch Connected Devices and Solutions GmbH CISS Demo Python Script / Operating Instructions v2.0 3.2 Set the Device Name If there are several CISSes are used, it can be useful to give a unique name to each device. The Device name is a text field that the user defines as a name for the CISS. The name...

Bosch Connected Devices and Solutions GmbH CISS Demo Python Script / Operating Instructions v2.0 3.6 Mode Selection The script has four different mode. Only one of them can be active. Please activate (make true) ONLY ONE of the four modes. All available modes are: • RawDataStreaming_Mode, • Accelero...

Bosch Connected Devices and Solutions GmbH CISS Demo Python Script / Operating Instructions v2.0 3.6.3 Time Aggregation Mode The time aggregation mode is a special mode to reduce the data volume by aggregating the data in the CISS. This mode is only available for accelerometer, gyroscope and tempera...

Bosch Connected Devices and Solutions GmbH CISS Demo Python Script / Operating Instructions v2.0 The user must set the thresholds for each sensor. The thresholds are shown in the following table. Please note that if a certain sensor should be disabled for event detection, the threshold value can be ...

Bosch Connected Devices and Solutions GmbH CISS Demo Python Script / Operating Instructions v2.0 As an alternative, there is a “startCISS.bat” to click and start the script. Please set your Python path in the environmental variables first or open this file with a text editor and put your python.exe ...

Bosch Connected Devices and Solutions GmbH CISS Demo Python Script / Operating Instructions v2.0 The data part includes the raw-data coming from the sensors. It includes following columns • Unix TimeStamp (ms): It is the timestamp of the data reception (stamped in the script) in UNIX timestamp forma...

Bosch Connected Devices and Solutions GmbH CISS Demo Python Script / Operating Instructions v2.0 • z_axis: If the measurement is from accelerometer, magnetometer or gyroscope, the z_axis value will be shown here. If the measurement is from temperature, pressure, humidity or light sensor, it will be ...

Bosch Connected Devices and Solutions GmbH CISS Demo Python Script / Operating Instructions v2.0 5.2.3 Time Aggregation Mode Log Files The time aggregation mode is special mode to reduce the data volume by aggregating the data in CISS. This mode is only available for accelerometer, gyroscope and tem...

Bosch Connected Devices and Solutions GmbH CISS Demo Python Script / Operating Instructions v2.0 5.2.4 Event Detection Mode Log Files The event detection mode log files have the same header part like raw-data log files (see in 5.2.1 Raw Data Log Files). But the data part is different as shown on the...

Bosch Connected Devices and Solutions GmbH CISS Demo Python Script / Operating Instructions v2.0 6 Release Notes Version 3.0.0 (Python_3 compatible) • The Script is converted to Python_3 • Format of the csv log files are improved. • Time Aggregation Mode is implemented • Improvements in the script p...

Bosch Connected Devices and Solutions GmbH CISS Demo Python Script / Operating Instructions v2.0 Bosch Connected Devices and Solutions GmbH Ludwig-Erhard-Straße 2 72760 Reutlingen Germany [email protected] www.bosch-connectivity.com