Bogen OCS1 - Manuals

Product Diagrams OCS 1 Front Drawing (grille removed) 1 . Coaxial Driver Assembly 2. Bass Tuning Vents (x2) 3. Grille Retention Groove 4. Power Tap Selection Switch 5. Mounting Clamp Screws (x4) OCS 1 Rear Drawing 6. Metal Back Can 7. Snap-Lock Input Connector 8. Mounting Clamps (x4) OCS 1 Rear Draw...

Installation The OCS 1 can be installed in a variety of ceiling environments.The use of the TBCR (Tile Bridge Support Ring) accessory may be desired for many of these environments. For suspended ceilings, the use of a TBCR is strongly recommended tohelp support and distribute the weight of the speak...

Speaker Wiring All wiring should be done prior to installationand then plugged into the rear of the OCS 1 . Wiring is terminated at a snap-lock input connector. There are two positive and twonegative terminals to accommodate daisy-chaining of speakers in a system. Daisy-Chaining The OCS 1 ’s snap-lo...