Bogen ADP1 - Manual
Bogen ADP1 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – The ADP
- Page 4 – Settings
- Page 5 – Wiring; Phone Connection
- Page 6 – Installation; Flush Mounting the ADP
- Page 7 – Specifications
- Page 8 – Warranty
Analog Door Phone
Model ADP1
Installation and Use Manual
© 2004 Bogen Communications, Inc.
All rights reserved.
Specifications subject to change without notice.
54-2098-0
1
B 0607
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Was this manual helpful?
About this manual
- Brand
- Bogen
- Model
- ADP1
- Document type
- Manual
- Language(s)
- English
- Pages
- 8
- File size
- 229.6 KB
- Format
Summary
3 Package Contents • ( 1 ) ADP 1 • (4) Hex drive screws • ( 1 ) Hex wrench • ( 1 ) Bezel • ( 1 ) Bezel gasket Description The ADP 1 is a convenient remote, weatherproof, hands-free two-way terminal device for telephone systems.The unit is telephone line powered and includes adjustable microphone and...
1 . TEL Line Connector - Analog station line connection (Tip and Ring) is made via an RJ 11 connector that is pre-wired to a 2-position pluggable terminal block. The connections to the terminal block are not polarity sensitive. (See Wiring, pg. 5.) 2. Speaker Volume POT - The Speaker Volume POT cont...
5 Wiring Phone Connection The ADP 1 comes with an RJ 11 wired to the pluggable terminal block. Connect the ADP 1 to the phone system’s analog station line programmed for ring down operation using theRJ 11 or directly to the screw terminals depending on how the lines are terminated. The connections t...
