Bogen FMH15T - Manual
Bogen FMH15T – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Installation Instructions
The FMH
1
5T is designed to be mounted by its flange.
Figure
1
shows the mounting hole
locations.
Components
Bogen recommends using the SGHD8 Grille with the FMHAR8 Adapter Ring for proper
mounting of the horn.The SGHD8 Grille will mount to the BBFM6 Flush Mount Enclosure
or BBSM6 Surface Mount Enclosure. See
Figure 3
on other side for mounting details.
1
. Make the electrical connections
(see Figure 2)
. Connect the 70V or 25V “hot” lead to the
#
1
terminal and the system common lead to the #2 terminal. Follow this pattern on all
similar speakers to ensure proper phasing; however, the speakers will work perfectly well
if the connections are reversed.
2. Adjust the tap selector switch to the desired wattage using the chart below.
FMH15T
Flange Mounted, 15W,
Horn Loudspeaker
© 2005 Bogen Communications, Inc.
Specifications subject to change without notice.
54-2
1
37-0
1
A 0505
Figure 1
Figure 2
IMPORTANT
* Do not use these positions
1
0.9
0.125
2
1.8
0.25
3
3.6
0.5
4
7.5
0.9
5
15
1.8
6
*
7.0
7
*
15
8
*
*
TAP SET 70V WATTS
25V WATTS
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
