Bogen RE84 - Manual

Bogen RE84

Bogen RE84 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
Page: / 2
Loading the manual

Ceiling Speaker Enclosure & Tile Bridge
Models RE84 and TB8

Installation and Use Manual

UL LISTED (UUMW) Flush-Mounted Loudspeaker Installation
For Use In Return Air Ceiling Plenum Spaces

Enclosures (UL Listed)

RE84

Intended for use with:

TB8 (Tile Support Bridge)

Listed by Underwriters Laboratories, Inc. Category UUMW.
Material and construction permits use where ceiling plenum is
part of the air handling system.

Compound knockout(s) provided for listed type metallic type
fittings for

1

/

2

" and

3

/

4

" plenum rated cable and plenum whip flex

conduit.

Four horseshoe tab slots provided on each enclosure to mate with
four horseshoe tabs on TB8 bridge eliminates the need for
screws.

Two seismic tie-off tabs and four tie-off tab slots with enclosure.

RE84 Features

RE84

TB8

© 2004 Bogen Communications, Inc.
All rights reserved.
Specifications subject to change without notice.
54-2

1

08-0

1

A 0404

Distributes the weight of a speaker, grille, and protective
enclosure onto the ceiling grid.

Four locator tabs to prevent sliding on ceiling tile.

Four horseshoe tabs to mate with four horseshoe tab slots on
enclosure.

TB8 Features

A Listed assembly requires that the enclosed loudspeaker is not
exposed within the air handling plenum. Wiring, and/or conduit
enclosure entry fittings, and installation must comply with local codes.
Many local codes require a separate enclosure assembly with
customer-supplied "tie-off" wire to secure the assembly to the top of
the building structure.

NOTE: All cable splices and connections to Speaker/Transformer
pigtails must be made inside of Listed enclosure.

NOTE: When the RE84 and the TB8 are installed together,
the clearance holes on the TB8 are used during installation.
However, when the TB8 is installed without the RE84, the
threaded holes on the TB8 are used during installation.

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Other Bogen Models

All Bogen Other