Page 2 - RC 09H remote control handset; Overview
2 RC 09H remote control handset Overview 9 14 12 10 11 13 2 3 4 1 6 7 8 5
Page 3 - Anhang; Allgemeines Kurzanlei-; Monitor
Anhang Allgemeines Kurzanlei- Touren Zieleingabe Zielspeicher Einstellun- 3 Overview Monitor 1 Screen for displaying the symbol and map displays. 2 Infrared receiver for the RC 09H remote control handset. 3 Left +/- rocker switch for adjusting the brightness. 4 SRC buttonVideo source selection switc...
Page 4 - Safety Information
4 The TravelPilot DX-V has been designed for use in cars. Such special information as height restrictions or maximum permissible loads as required for lorries or busses havenot been included on the navigation CDs. Using the system while driving If you do not pay attention to the current traffic situ...
Page 5 - Contents
Anhang Allgemeines Kurzanlei- Touren Zieleingabe Zielspeicher Einstellun- 5 Contents Overview .............................................. 2Safety Information ............................... 4Introduction ......................................... 6General Information ............................ 7...
Page 6 - Notice regarding liability; Introduction
6 Dear Customer, Congratulations on buying the TravelPilot DX-V. You can rest assured that you havemade the right choice by buying the TravelPilot DX-V. The TravelPilot DX-V is a reliable and easy-to-use navigation system that will leadyou with precision through the traffic to your destination. Thes...
Page 7 - General Information; About these operating instructions; RC 09 infrared steering-wheel remote control
Anhang Allgemeines Kurzanlei- Touren Zieleingabe Zielspeicher Einstellun- 7 General Information About these operating instructions These operating instructions were written to provide you with information on the oper-ation and functions of your TravelPilot DX-V and to allow you to operate the equip-...
Page 9 - Operating introduction; on
Anhang Allgemeines Kurzanlei- Touren Zieleingabe Zielspeicher Einstellun- 9 Operating introduction When the system is started for the first time, an operating introduction explaining thefunctions of the remote control will appear. Then you can select whether or not thisintroduction is shown each tim...
Page 10 - Quick Reference; Meaning of the icons in the menus; - Icon: for starting the route calculation and route guidance; Marking menu items; Exiting menus
10 Quick Reference Meaning of the icons in the menus In various menus, functions are activated and actions carried out by marking andconfirming icons. The most important icons are shown and explained here: - Icon: for starting the route calculation and route guidance - Icon: for saving addresses and...
Page 11 - Direct destination entry in 10 steps; button. A long press on the
Anhang Allgemeines Kurzanlei- Touren Zieleingabe Zielspeicher Einstellun- 11 The following three examples have been included to familiarise you quickly with thebasic functions of the TravelPilot DX-V: – Direct destination entry in a city indicating the street and a junction – Entering a name for the...
Page 14 - An example of route guidance using the map display; Altering the route options before beginning route guidance
14 Saving the current destination with a short name before begin-ning route guidance 1. Mark the icon. Press the OK button. The speller for entering the destination name will appear. ✔ 2. Enter a name for your destination, e.g. “HOTEL”, as described above. 3. Mark “OK” in the character set and press...
Page 15 - Switching to map display
Anhang Allgemeines Kurzanlei- Touren Zieleingabe Zielspeicher Einstellun- 15 3. Move the selection bar to “Short route” and press OK . You have now selected the “Short route” option. ✔ 4. If “Motorway” is activated (a checkmark will appear in the box), move the se-lection bar to “Motorway” and press...
Page 18 - Entering destinations; Use the globe icon to enter a destination directly on the map.; Entering the destination when you know the address; Select “Destination” in the main menu. Press; The “Destination” menu will appear.
18 Entering destinations Using the four icons on the top line of the “Destination” menu you can enter yourdestination in the following ways: Use the envelope icon to enter your destination directly with the exact ad-dress using the following menu items: “City” - “Centre” - “Street” - “Junction” -“Ho...
Page 19 - Selecting a town centre (part of town) as your destination
Anhang Allgemeines Kurzanlei- Touren Zieleingabe Zielspeicher Einstellun- 19 Selecting a town centre (part of town) as your destination In large cities you can also enter a part of the city as your destination. 1. To enter a town centre as your destination, first enter the town.The “Destination” men...
Page 22 - Entering destinations using coordinates
22 Entering destinations using coordinates You can use the icon (coordinate grid) for entering your destinations as coordi- nates. To do so, you will need to enter the coordinates in degrees of longitude andlatitude. 1. Select the icon in the top line of the “Destination” menu. Press the OK button. ...
Page 23 - Entering destinations in map mode; Adjusting the map scale
Anhang Allgemeines Kurzanlei- Touren Zieleingabe Zielspeicher Einstellun- 23 Entering destinations in map mode Use (the globe icon) to determine a destination for navigation in map mode. 1. Select on the top line of the “Destination” menu. Press OK . A map which indicates north facing up will appear...
Page 25 - Saving the destination on the map before starting route guidance
Anhang Allgemeines Kurzanlei- Touren Zieleingabe Zielspeicher Einstellun- 25 Saving the destination on the map before starting route guidance If you have marked the destination with the cross wires, you can save it in the destina-tion memory and use it for route guidance later. 1. Press OK to access...
Page 26 - Destinations in the destination memory; Selecting a destination from the destination memory
26 Destinations in the destination memory The destination memory is used to save frequently used destinations, to give them ashort name (for identification purposes) and to recall them at a later date for routeguidance. Plus Point: The TravelPilot DX-V automatically saves the last 12 destinationsuse...
Page 27 - Route guidance; Starting route guidance; Mark the; Restarting interrupted route guidance; The main menu is currently active.
Anhang Allgemeines Kurzanlei- Touren Zieleingabe Zielspeicher Einstellun- 27 Route guidance There are three display modes available for route guidance. You can choose betweenroute guidance with arrow symbols, route guidance with map display, or mixed modein which both the map and symbols are display...
Page 28 - Adjusting the volume of the voice output; Requesting destination and route information; Viewing the route list
28 Route guidance Adjusting the volume of the voice output 1. To adjust the volume of the voice output for the spoken recommendations,press or . A window in which you can adjust the volume will appear. ✔ 2. Use to adjust the volume. Press OK . You will now hear the spoken recommendations at this vol...
Page 29 - Route guidance in the arrow symbols mode; Activating the symbol display mode
Anhang Allgemeines Kurzanlei- Touren Zieleingabe Zielspeicher Einstellun- 29 Route guidance in the arrow symbols mode During route guidance with visual driving recommendations, the system will displayarrow symbols that provide a graphical representation of the spoken driving recom-mendations. In add...
Page 30 - Route guidance with map display; Activating the map display; during the arrow symbols mode.; Route guidance will continue in map mode.
30 Route guidance Route guidance with map display When you use route guidance with the map display, you can select a map showingyour position surroundings (current vehicle position) or the destination surroundings. The map showing your position surroundings changes in its alignment to indicate yourd...
Page 33 - Information on the map
Anhang Allgemeines Kurzanlei- Touren Zieleingabe Zielspeicher Einstellun- 33 Route guidance Information on the map You can also have such additional information as car parks and petrol stations dis-played in symbol form on the map. The following information can also be displayed on the map: Exhibiti...
Page 34 - Selecting the map display
34 Selecting the map display You can choose the following map display options: – Map with information window. – Pure map display. – Mix mode: The map display, symbol display and information window areshown on-screen all at the same time. Plus Point: In mix mode, you do not have to worry that you wil...
Page 35 - Selecting driving time or time of arrival
Anhang Allgemeines Kurzanlei- Touren Zieleingabe Zielspeicher Einstellun- 35 Route guidance Selecting driving time or time of arrival You can choose whether to have the travel time or arrival time displayed in the rightinformation window. 1. Press OK to open the drop-down menu. Mark “Settings”. Pres...
Page 36 - Using the traffic congestion function; Activating the traffic congestion function
36 Using the traffic congestion function Regardless of whether or not your TravelPilot DX-V is able to receive information froma TMC source (“TMC D-Namic tuner box” or appropriately equipped Blaupunkt carradio), you can enter a traffic congestion detour manually. As a result, you can alteryour route...
Page 37 - Cancelling a traffic congestion detour; Excluding roads/road sections from the route list; The route list will appear.; indicates that the road marked is excluded from the route list.; To exclude road sections, mark the road and press
Anhang Allgemeines Kurzanlei- Touren Zieleingabe Zielspeicher Einstellun- 37 Cancelling a traffic congestion detour 1. If the traffic situation improves, you can cancel a traffic congestion detour. Inthe “Congestion” menu for manual entries, mark the menu item “Cancel ‘con-gestion ahead’ option”. Pr...
Page 38 - Cancelling road exclusions on the route list
38 Cancelling road exclusions on the route list 1. If the traffic situation has improved, you can cancel road exclusions you haveentered in the route list. Mark “Cancel exclusion option” in the “Congestion”menu. Press OK . Route guidance will appear, you will hear the following voice output: “Therou...
Page 39 - Dynamic route guidance with TMC
Anhang Allgemeines Kurzanlei- Touren Zieleingabe Zielspeicher Einstellun- 39 Dynamic route guidance with TMC The TMC function on the TravelPilot DX-V enables the system to use dynamic routeguidance (currently only in Germany and in the Netherlands) to avoid traffic conges-tion. The TravelPilot DX-V ...
Page 40 - Selecting the TMC station with the TMC D-Namic tuner box
40 Switching TMC on/off The TMC function is switched on or off in the Route options menu.For more information, refer to the section on “Selecting route options”. NoteIf the TMC function is switched on, the options for “Fast route”, “Motor-way”, “Ferry” and “Toll” will be selected automatically in th...
Page 41 - Selecting the TMC station with the car radio; Press; The TMC seek tuning function for the car radio will begin.
Anhang Allgemeines Kurzanlei- Touren Zieleingabe Zielspeicher Einstellun- 41 available. This intelligent switching function means that the station indicationmay change frequently in the reception area as well. This ensures that youalways receive all of the traffic information which is transmitted by...
Page 42 - Displaying traffic messages; Displaying on the map; slow traffic
42 Calculating the route with TMC while route guidance is inprogress The traffic messages are transmitted by TMC stations along with their regular pro-gramming. If a traffic message affects the route calculated, then a new route to theselected destination will be calculated automatically. You will h...
Page 43 - Reading as text messages; Mark “Display travel information” in the “Congestion” menu. Press; The first TMC traffic message on the list will appear.
Anhang Allgemeines Kurzanlei- Touren Zieleingabe Zielspeicher Einstellun- 43 NoteThe traffic congestion symbols and the dashed line are displayed in redon the map if they are not relevant to the route (e.g. if on the oppositecarriageway or alongside the route). Reading as text messages You can also ...
Page 44 - Selecting route options; Altering route options prior to route guidance; Activating/deactivating route options
44 Selecting route options You can select a number of route options for route calculation to meet your individualneeds. You can always select between the short and the fast route. In addition, you can useor avoid motorways, toll roads, ferries and switch dynamic route guidance (TMC) onor off. (For m...
Page 45 - Altering the route options while route guidance is in progress; Saving your settings
Anhang Allgemeines Kurzanlei- Touren Zieleingabe Zielspeicher Einstellun- 45 Altering the route options while route guidance is in progress It is possible to alter the route options while route guidance is in progress in the “Set-tings” menu for route guidance. 1. Press OK while route guidance is in...
Page 46 - Destination memory; Accessing the destination memory; Mark “Dest. memory” in the main menu. Press; The icons in the top icon bar represent:
46 Destination memory You can use the destination memory to name (for identification purposes) and savefrequently used destinations. You can then retrieve these destinations from a list sort-ed according to your own criteria or alphabetically. The TravelPilot DX-V also auto-matically saves the last ...
Page 47 - Saving destinations; Saving your current destination with a name
Anhang Allgemeines Kurzanlei- Touren Zieleingabe Zielspeicher Einstellun- 47 Saving destinations You can save your current destination or your current vehicle position as a destina-tion. Saving your current destination with a name 1. Mark in the “Dest. memory” menu. Press OK . The “Dest. memory - Ed...
Page 48 - Saving your current vehicle position as a destination
48 Saving your current vehicle position as a destination Plus Point: It is very convenient to be able to save your current vehicle posi-tion as a destination when you get somewhere “en route” that you would liketo return to later. This method also uses the most exact data, so that you canuse route g...
Page 49 - Deleting destinations from the destination memory; Deleting a single destination
Anhang Allgemeines Kurzanlei- Touren Zieleingabe Zielspeicher Einstellun- 49 Deleting destinations from the destination memory You can delete individual destinations, the last destinations and clear the entire des-tination memory. Deleting a single destination 1. Mark “Delete destination” in the “De...
Page 50 - Sorting the destination memory; Mark “Sort destinations” in the “Dest. memory - Edit” menu. Press; The “Choose destination” menu will appear.; Use
50 Sorting the destination memory You can save all of the destinations identified with a name in any order you choose(individually sorted destination memory, symbol). 1. Mark “Sort destinations” in the “Dest. memory - Edit” menu. Press OK . The “Choose destination” menu will appear. ✔ 2. Mark the de...
Page 51 - Tour memory; Entering tour destinations; Entering new tour destinations
Anhang Allgemeines Kurzanlei- Touren Zieleingabe Zielspeicher Einstellun- 51 Tour memory Use the tour memory to combine individual destinations to create a “tour”. Plus Point: With the help of the tour memory, you can easily plan sightseeingtours or business trips to customers. 1. To program the tou...
Page 53 - Sorting the tour list
Anhang Allgemeines Kurzanlei- Touren Zieleingabe Zielspeicher Einstellun- 53 Sorting the tour list 1. If you would like to re-sort the tour list, mark on the top line of the tour memory. Press OK . The “Tour memory - Edit” menu will appear. ✔ 2. Select “Sort tour”. Press OK . The tour list will appe...
Page 54 - Deleting the whole tour; Starting route guidance to a tour destination
54 Deleting the whole tour 1. If you would like to delete a tour completely from the tour memory, mark on the top line of the tour memory. Press OK . The “Tour memory - Edit” menu will appear. ✔ 2. Mark “Delete whole tour”. Press OK . A pop-up inquiry requiring confirmation will appear. ✔ 3. Mark “Y...
Page 55 - Travel guides; Activating the travel guide; Special cases when entering a destination
Anhang Allgemeines Kurzanlei- Touren Zieleingabe Zielspeicher Einstellun- 55 Travel guides The additionally available navigation CDs containing travel guides extend the rangeof features of your TravelPilot DX-V. The travel guides allow you to select such facil-ities as hotels and restaurants and to ...
Page 56 - Other functions; Map display without route guidance; Accessing the on-board computer; Displaying the GPS status
56 Other functions Map display without route guidance While driving without active route guidance, you can use the TravelPilot DX-V to dis-play a map of the surrounding area. This map can display all of the information avail-able for navigation, e.g. parking garages and public facilities. For more i...
Page 57 - System settings; Accessing the main menu for system settings; Selecting the language
Anhang Allgemeines Kurzanlei- Touren Zieleingabe Zielspeicher Einstellun- 57 System settings Accessing the main menu for system settings The system settings for the TravelPilot DX-V can be altered by selecting the “Set-tings” menu item in the main menu. 1. Select “Settings” in the main menu. Press O...
Page 59 - Selecting the automatic/day/night display mode; To select the display mode, mark “Display”. Press; A menu for the selection of the display mode will appear.; The mode selected will be activated.
Anhang Allgemeines Kurzanlei- Touren Zieleingabe Zielspeicher Einstellun- 59 Selecting the automatic/day/night display mode 1. To select the display mode, mark “Display”. Press OK . A menu for the selection of the display mode will appear. ✔ 2. Select the desired mode. Press OK . The mode selected w...
Page 60 - Basic settings; Mark; Activating/deactivating the security code; A menu in which you must enter the code number will appear.; Switching the operating introduction on/off
60 Basic settings 1. Mark on the top line of the “Settings” menu. Press OK . The sub-menu for audio/video settings will appear. ✔ Activating/deactivating the security code 1. If you would like to activate or deactivate the security code for the TravelPilotDX-V, select “Security code”. Press OK . A m...
Page 61 - Selecting a monitor; Select the appropriate monitor version and press the; The selected monitor is indicated by a filled circle.; Selecting an external video source; Switching to the video source; Press the SRC button
Anhang Allgemeines Kurzanlei- Touren Zieleingabe Zielspeicher Einstellun- 61 Selecting a monitor Depending on the version, the TravelPilot DX-V is supplied with a detachable 16:9(wide screen) monitor or a retractable 16:9 (wide vision) monitor with an integrated TVtuner. If you want to use the Trave...
Page 63 - Other settings; Setting the clock
Anhang Allgemeines Kurzanlei- Touren Zieleingabe Zielspeicher Einstellun- 63 Other settings 1. Mark on the top line of the “Settings” menu. Press OK . The sub-menu for other settings will appear. ✔ Setting the clock You can set daylight-savings time, the current time, the display of the arrival or d...
Page 65 - Selecting the clock display
Anhang Allgemeines Kurzanlei- Touren Zieleingabe Zielspeicher Einstellun- 65 Selecting the clock display You have the option of switching the clock display on/off in the bottom line of themonitor. 1. Select the “Display time” menu item. Press the OK button. The clock display is switched on if a smal...
Page 66 - Activating the demonstration mode; Deactivating the demonstration mode
66 3. After you have entered the city/town, the street and the junction, you stillhave to set the direction and the distance from the junction to your vehicleposition. Select the corresponding menu item and use to enter the in- formation. Then mark “OK” and press OK . Activating the demonstration mo...
Page 67 - Calibration settings; Calibration after changing the tyres; Installing the system again
Anhang Allgemeines Kurzanlei- Touren Zieleingabe Zielspeicher Einstellun- 67 Calibration settings 1. Mark on the top line of the “Settings” menu. Press OK . The sub-menu for calibration will appear. ✔ Calibration after changing the tyres When the car tyres are changed, from summer to winter tyres fo...
Page 68 - Displaying the calibration status; Manual calibration
68 Displaying the calibration status You can display the status of your system calibration. 1. Select “Status”. Press OK . A window indicating the current calibration status will appear. ✔ The status information is indicated in percent. Manual calibration You can also calibrate the TravelPilot DX-V ...
Page 69 - Appendix; Changing the navigation CD-ROM
Anhang Allgemeines Kurzanlei- Touren Zieleingabe Zielspeicher Einstellun- 69 Appendix Changing the navigation CD-ROM The CD-ROM cannot be changed unless the vehicle is stationary. To remove the CD-ROM press the button. The CD-ROM will eject. With the label facing up, insert the new CD-ROM carefully ...
Page 70 - Some comments regarding questions on reading quality:; Available navigation CD-ROMs; Precise routes to your destination; Available travel guide CD-ROMs; Expert information
70 Some comments regarding questions on reading quality: A dirty or damaged CD can lead to difficulties when reading the CD. The severity ofthe reading error depends on the amount of dirt present and the severity of the phys-ical damage. Severe scratches cause “read errors (data errors)”, which lead...
Page 71 - Wide screen monitor settings; Adjusting the display brightness
Anhang Allgemeines Kurzanlei- Touren Zieleingabe Zielspeicher Einstellun- 71 Wide screen monitor settings The display brightness, the contrast, the brightness of the keypad illumination and thedisplay on/off switch are all controlled at the front of the monitor. You also have theoption of resetting ...
Page 73 - Index; Deactivating the demonstration
Anhang Allgemeines Kurzanlei- Touren Zieleingabe Zielspeicher Einstellun- 73 Index A Accessing the destination memory ..... 46Activating the demonstration mode ..... 66Activating the map display .................. 30Activating the reversing camera .......... 62Activating the symbol display mode .......
Page 74 - Using the last destination used for
74 Index Selecting an external video source ..... 61Selecting driving time or time of arrival ............................................... 35 Selecting non-urban destinations ........ 21Selecting route options ....................... 44Selecting surrounding destinations ..... 20Selecting the auto...
Page 75 - Blaupunkt GmbH
Blaupunkt GmbH 01/2002 CM/PSS 8 622 402 693 A (GB) Country: Phone: Fax: www: Germany (D) 0180-5000225 05121-49 4002 http://www.blaupunkt.com Austria (A) 01-610 390 01-610 393 91 Belgium (B) 02-525 5454 02-525 5263 Denmark (DK) 44 898 360 44-898 644 France (F) 01-4010 7007 01-4010 7320 Great Britain ...
Blaupunkt 7 649 020 110
Manual
Blaupunkt Acapulco CD51
Manual
Blaupunkt CD70
Manual
Blaupunkt LOUISIANA RCM 148
Manual
Blaupunkt RD 169
Manual
Blaupunkt 520
Manual
Blaupunkt MPA160us
Manual
Blaupunkt Alaska CJ70
Manual
Blaupunkt RCM 85
Manual
Blaupunkt IVMS-6502
Manual
Blaupunkt Miami CD72
Manual
Blaupunkt LS 162e
Manual
Blaupunkt RCM 149
Manual
Blaupunkt Mnchen CD51
Manual