Page 2 - Device overview
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 2 Device overview 5 8 7 6 10 12 11 13 14 16 15 17 3 4 2 9 1
Page 3 - TA button, activates traffic information standby.; NAV button, activates the navigation system.
3 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH 1 button, opens the control panel. 2 Rocker switch. The way the rocker switch functions de-pends on the individual menus and operating modes. 3 AUD button, opens the audio menu. 4 TA button, activates...
Page 5 - Overview of navigation functions; NAVIGATION; STREET
5 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Overview of navigation functions Press the NAV key once in order toswitch from the radio or CD-changer (op-tional) audio sources to the navigationsystem’s main menu or back to naviga-tion (if a naviga...
Page 6 - CENTRE
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 6 Navigation begins. The visual driving recommendations ap-pear in the left of the display. In the centre you will see a display thatprovides a symbolic representation of thedistance to the next decision point (e.g. acrossing). On the...
Page 7 - Safety information; The TravelPilot has been designed for use in passenger cars.
7 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Safety information The TravelPilot has been designed for use in passenger cars. Special information such as height restrictions or maximum permitted road load, which is required for navigatingtrucks a...
Page 9 - About these instructions
9 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH About these instructions The aim of these instructions is to familiarize you with the functions of the Travel-Pilot and ensure that you can safely and successfully operate the unit. Beforestarting to ...
Page 10 - Switching the unit on/off; Switching on when the vehicle ignition is off
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 10 Switching the unit on/off 1 Press the left knob/pushbutton @ to switch on your TravelPilot. ✔ The unit plays the audio source that was active last at the preset volumelevel. You can find out how to set the power-on volume in the se...
Page 11 - Selecting the operating mode; Switching between the main menu and functions menu; JUMP; JUMP; SEARCH
11 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Selecting the operating mode To select the operating mode, press: 1 the TU button A for radio mode or 1 the CD-C button ? for CD or CD-changer (optional) mode or 1 the NAV button < to activate nav...
Page 12 - Opening the setup menu; Adjusting the volume; Automatic volume mute during telephone calls; FM; RADIO 1
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 12 Switching between the navigation system’s main menu and navigationmenu If you want to switch between the main menu and the navigation menu during anactive navigation, 1 press the NAV button < . If navigation is not active, posit...
Page 13 - Display
13 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Display The TravelPilot’s display contains all the navigation information (e.g. visual driv-ing recommendations), menus and lists, as well as the menus relating to theradio, CD and CD changer (option...
Page 14 - Adjusting audio settings and sound distribution settings; FM TONE
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 14 Adjusting audio settings and sound distribution settings The TravelPilot allows you to adjust the bass and treble for each audio source. Changes to the balance and fader sound distribution settings and loudness set-tings (aurally c...
Page 15 - CODE
15 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH CODE 0 0 123456789 Code request Switching a coded unit on after disconnection from the bat-tery power supply If you switch on a coded unit after having disconnected it from the battery powersupply (f...
Page 16 - Navigation; How navigation works
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 16 Navigation The navigation system in the TravelPilot helps you find your way to destinationsquickly and safely without first having to spend time studying a roadmap. Whennavigation is active, you will be guided by the voice output. ...
Page 17 - Starting navigation; Destinations
17 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH ✔ The software is loaded from the CD. The progress is indicated in thedisplay. Note: The process of loading the software from the navigation CDmust not be interrupted. Starting navigation 1 Press the...
Page 18 - Entering destinations using the speller; Selecting letters; ÄÖÜ
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 18 • Previously saved special destinations such as train stations, airports, petrolstations and other public facilities. You can view a sorted list of specialdestinations for the destination town, the area around a destination, on ana...
Page 19 - Switching to special character sets
19 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH 2 When the required character is highlighted, press the right knob/push-button ; . ✔ The character will be entered into the input line. An appropriate entryfrom the list will be displayed in the matc...
Page 20 - ROUTE LIST
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 20 Deleting letters To delete a letter that you entered accidentally, 1 press the ESC button 9 or 1 highlight the symbol and press the right knob/pushbutton ; . ✔ The input cursor will move to the left in the input line. If the requir...
Page 21 - Paging through lists; Selecting list entries
21 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Paging through lists To find the entry you are looking for quickly in large lists, you can also browsethe list page by page. 1 Use the right knob/pushbutton to move the selection bar to the or arrow ...
Page 22 - Entering a destination - town
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 22 Entering a destination - town If you want to drive to a destination in a town, you first have to specify one. 1 Select the DEST. ENTRY item in the main navigation menu. ✔ The destination input menu opens. 2 Select CITY . ✔ The spel...
Page 23 - Entering a destination - street, junction and house number
23 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH 6 Press the right knob/pushbutton ; to accept the place as your destina- tion. If there are multiple instances of the town’s name, a submenu will open. Youcan then select the required town from it. I...
Page 24 - INTERSECTION
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 24 1 Enter the street name using the speller. 2 Select the required street name from the list. ✔ If the street name occurs several times in the destination town, a sub-menu will open in which you can specify the street precisely. ✔ Af...
Page 25 - Entering a destination - centre
25 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH You can specify route options in order to customise the route to suit your partic-ular requirements, e.g. excluding motorways. For further information, read thesection entitled “Route options” in thi...
Page 27 - Special destinations - at your final destination
27 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH - POS. SURROUND : This includes special destinations within the vicinity of the current vehicle position (this function is particularly useful when look-ing for facilities such as petrol stations). S...
Page 28 - Special destinations - national destinations; IN DEST AREA
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 28 Special destinations - national destinations You can also select items such as motorway junctions, service stations, airportsor border crossings as your destination. You do not need to previously enter adestination to do so. The on...
Page 29 - Special destinations - destination surrounding area
29 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Special destinations - destination surrounding area Before you can select special destinations that are in the vicinity of the destina-tion, you first have to enter a town as the destination. 1 Enter...
Page 30 - Entering a destination - from the destination memory; POSITION MARK
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 30 ✔ Navigation begins. For further information, read the section entitled“Navigation”. Entering a destination - from the destination memory You can save destinations, which you drive to regularly, in the destination mem-ory so that y...
Page 31 - Entering a destination - position marker; Selecting a position marker as a destination
31 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Entering a destination - position marker You can set one of your preset position markers as a destination. A positionmarker is a vehicle position that you set during an active navigation session orwh...
Page 33 - SCHLOSSWEND...
33 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH In the right of the display you can optionally display either the approxi-mate remaining journey time to the destination, the approximate arrivaltime or the current time. For further information, rea...
Page 35 - Dynamic navigation; OFF
35 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Dynamic navigation During dynamic navigation, the TravelPilot analyses digital traffic informationmessages and uses this information when planning the route. The trafficmessages are received from TMC...
Page 36 - Tour list; Entering a tour destination; TOUR LIST
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 36 Tour list The tour list allows you to combine individual destinations in a “tour”. TIP: The tour list is a convenient way of planning such things as inspec-tion tours or visits to various customers. 1 To programme the tour list, se...
Page 37 - Using the navigation system’s last destination
37 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH You can now move the destination to the required position in the tour memory: 1 Press the right knob/pushbutton ; . ✔ A reposition marker appears in front of the destination. 2 Use the right knob/pus...
Page 38 - Sorting the tour; Deleting a tour destination
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 38 Sorting the tour To sort the tour, 1 select the SORT DEST. item in the TOUR LIST menu. 2 Press the right knob/pushbutton ; . ✔ The tour list is displayed. 3 Highlight the destination that you want to reposition. 4 Press the right k...
Page 39 - Deleting the whole tour; Starting a navigation session to a tour destination
39 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Deleting the whole tour To delete a whole tour, 1 select the CANCEL DEST. item in the TOUR LIST menu. 2 Press the right knob/pushbutton ; . ✔ A selection menu is displayed. 3 Highlight ALL DESTS. . ✔...
Page 40 - NO MAP navigation; Travel guide
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 40 NO MAP navigation NO MAP navigation begins if you remove the navigation CD after having en-tered the destination and started the navigation session. TIP: During a NO MAP navigation session you can use the internal CDdrive to play a...
Page 41 - Displaying the route list
41 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH - Historical buildings The information available can include addresses, telephone numbers, pricesand facilities provided by hotels and restaurants. Since the stored information depends on the travel ...
Page 42 - Position tracking mode; from the main navigation menu during; Destination memory; Saving a destination in memory
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 42 Once you have read the list, 3 close the menu by pressing the NAV button < . ✔ The navigation menu reappears. Position tracking mode In position tracking mode, the name of the road you are currently driving down isdisplayed in t...
Page 43 - Entering and editing short names
43 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH 1 Select DEST. MEMORY in the main navigation menu. 2 Open the EDIT MEMORY item in the destination memory menu. 3 Select SAVE DEST. . ✔ A speller will open for you to enter a short name. 4 Enter a sho...
Page 44 - Sorting destinations manually; Deleting destinations from the destination memory
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 44 Sorting destinations manually You can also sort destinations manually in the destination memory. You canthen access this list of manually sorted destinations from the destination memo-ry when selecting your destination. To sort the...
Page 45 - GPS status
45 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH ✔ A menu containing the following options appears: - SINGLE DEST. : You can select and delete individual destinations from the list of saved destinations. - ALL DESTS. : All destinations in the desti...
Page 46 - Bypassing a traffic jam during navigation; TRAFFIC AHEAD
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 46 Bypassing a traffic jam during navigation Alongside the feature for automatically bypassing traffic jams with the aid of thedynamic navigation feature, the TravelPilot also gives you the option of manual-ly entering traffic jams or...
Page 47 - Cancelling the traffic jam bypass feature; Excluding a route section from the route list; Excluding a route
47 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Cancelling the traffic jam bypass feature 1 Open the traffic jam bypass menu. 2 Select CLEAR and 3 press the right knob/pushbutton ; . ✔ The navigation menu opens again and the route list is recalcul...
Page 48 - Cancelling / changing exclusions; - 6 listed in the “Excluding a route” section.
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 48 3 Use the right knob/pushbutton ; to move the selection marker to the first road that you want excluded from your route. If necessary, openlonger sections as already described. 4 Press the right knob/pushbutton ; . ✔ A circle is di...
Page 49 - Defining route options
49 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Defining route options You can customise the route to suit your requirements at any time, even duringan active navigation session. The configurable parameters are: - ROUTE : Choose between the quicke...
Page 50 - Setting a position marker; TA
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 50 If you want to close the selection menu, 1 press the ESC button 9 (you will return to the navi menu) or 1 select the CONTINUE menu item and 2 press the right knob/pushbutton ; . ✔ If navigation is not active, the navi menu will be ...
Page 51 - Saving a position marker; NEW NAME
51 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Saving a position marker After you press the right knob/pushbutton ; , a selection menu opens. You are now given the option of assigning a name to the position marker or returning tothe menu in which...
Page 53 - Activating / deactivating the last 10 destinations memory; Selecting time information; TIME INFO
53 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Activating / deactivating the last 10 destinations memory If the LAST 10 option is activated, the last 10 navigation destinations are storedautomatically in memory. You can also deactivate the LAST 1...
Page 54 - Manually setting your position
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 54 Manually setting your position If GPS reception is not available, you can manually set your position yourself. 1 Press the MEN button : . ✔ The navi menu is displayed. 2 Highlight the MAN. POSITION menu item. 3 Press the right knob...
Page 55 - Simulating navigation
55 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Simulating navigation The TravelPilot provides you with the option of simulating a navigation session.During the simulation, the system provides visual driving recommendations andvoice output in real...
Page 56 - Radio mode; Switching to radio mode; Press the TU button; Selecting the frequency range or memory; press the TU button; FMT
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 56 Radio mode Switching to radio mode 1 Press the TU button A . ✔ The main menu opens in radio mode. The station that was received lastwill be heard. The six softkeys on both sides of the display are used for selecting and storingstat...
Page 58 - PTY alarm
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 58 1 Press the MEN button : . ✔ The setup menu is displayed. 2 Keep pressing the softkey that is assigned to REG until the required op- tion appears alongside REG . The default setting is OFF . Switching PTY on/off PTY (Programme Type...
Page 59 - Activating / deactivating the TA function for radio mode
59 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH TA (Traffic Announcement) Traffic announcements (TA) are a service provided by the broadcasting sta-tions. Traffic information announcements are broadcast regularly. Stations thatbroadcast traffic an...
Page 60 - Interrupting a traffic announcement; Tuning into FM stations
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 60 Interrupting a traffic announcement You can cancel the announcement by pressing the TA 4 , MEN : und ESC 9 buttons or by tuning into another station. TMC (Traffic Message Channel) TMC stands for Traffic Message Channel and refers t...
Page 61 - Automatic seek tuning; Browsing through broadcasting networks (only for RDS stations)
61 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH tune into a station manually (for further information read “Tuning into stationsmanually” later on). The >> option means that automatic seek tuning will be started (for further infor- mation, r...
Page 62 - Tuning into MW stations; Automatic seek tuning - MW
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 62 Note: This will only work if the RDS function is switched off in thesetup menu. 1 Press the << or >> button 2 . ✔ The frequency changes in 100 kHz steps. Tuning into MW stations You can automatically and manually tune i...
Page 63 - Scan seek tuning; Starting scan seek tuning; Note: Only a TMC Scan can be carried out on the FMC level.; TMCSTORE
63 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Scan seek tuning Scan seek tuning automatically searches the entire frequency range for receiv-able stations. Each station is played for ten seconds. If you do not stop scanseek tuning yourself, it w...
Page 64 - TMC Scan; Starting TMC Scan; Stopping TMC Scan; Storing stations; Storing stations manually
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 64 TMC Scan TMC Scan only tunes into stations that support the TMC feature. Starting TMC Scan To start a TMC Scan, 1 switch to the radio functions menu by pressing the TU button A and 2 press the softkey assigned to the PAGE 2 menu it...
Page 65 - Storing stations automatically - “Travelstore”; switch to the radio functions menu by pressing the TU button
65 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH 3 Tune into a station as described in the section entitled “Tuning into astation” and 4 press and hold the softkey assigned to the required memory locationuntil after the confirmation beep is heard. ...
Page 67 - Reducing reception interference in FM mode; Activating / deactivating SHARX; Displaying radiotext; Activating / deactivating radiotext
67 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Reducing reception interference in FM mode Neighbouring stations may occasionally cause interference to reception in FMradio mode. This occurs particularly when the stations are close together in the...
Page 68 - TIM - Traffic Information Memory; TRAFFIC; TIM
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 68 If radiotext is shown in the display, and you want to change stations, for in-stance, 1 press the TU button A or a softkey. ✔ The main radio menu appears without radiotext. 2 Switch to another station. ✔ The radiotext will appear i...
Page 69 - Recording traffic information; Note: You can also switch TIM off by keeping the T button
69 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Recording traffic information Whilst the unit is switched on, traffic information is recorded automatically if atraffic information station is received. If TIM is activated, traffic information will ...
Page 70 - Listening to stored traffic messages
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 70 1 Keep pressing the T button 8 until the required 2H , 24H or OFF option is highlighted. Listening to stored traffic messages The unit can record 14 traffic messages. To listen to the stored traffic messages, 1 press the T button 8...
Page 71 - Viewing TMC messages; ESC button
71 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH 1 You can drive into the car wash. When you switch the TravelPilot on again, you have to re-activate TIM recordingstandby. Viewing TMC messages The TravelPilot provides you with the option of viewing...
Page 72 - CD mode; Playing a CD; Inserting a CD
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 72 CD mode You can play audio CDs in the TravelPilot’s internal CD drive. When you areplaying audio CDs, only NO MAP navigation is possible. Only use audio CDs that bear this logo: During CD playback, the track number and the playing ...
Page 73 - Starting internal CD playback (no CD changer is connected); Switching the playing time display on/off; SCAN
73 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Starting internal CD playback (no CD changer is connected) If an audio CD is inserted and no CD changer is connected, 1 press the CD-C button ? . ✔ The unit switches to the main CD menu and CD playba...
Page 75 - Fast searching
75 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Fast searching If you are listening to a track and you want to play a certain part of it, you can doso with fast search mode. 1 Press the << or >> button 2 during playback. ✔ You can hear...
Page 76 - Naming CDs
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 76 Repeating tracks (REPEAT) To repeat a track, activate the repeat function. Proceed as follows: 1 Select the required track, 2 switch to the functions menu in CD mode by pressing the CD-C button ? and 3 press the softkey assigned to...
Page 77 - Entering a name; CD NAME; EDIT
77 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Entering a name 1 Use the right knob/pushbutton ; to move the selection marker to the first letter of the name you wish to enter. ✔ The currently highlighted letter is displayed in an enlarged fashio...
Page 78 - Deleting all names; Programming playlists; Defining a playlist
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 78 Deleting all names If you want to delete all the CD names from memory, proceed as follows: 1 Open the CD name menu and 2 press the softkey assigned to the CLR ALL menu item. ✔ A confirmation request appears. If you are sure you wan...
Page 79 - Deleting tracks from playlists; ADD
79 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH ✔ The programme menu opens. If you have not selected any tracks yet, the CLR PRG and RUN items cannot be selected. If this is the case, they will be marked with a lock symbol. 3 Use the << / &g...
Page 80 - Deleting individual playlists; Deleting all playlists in memory
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 80 Deleting individual playlists To delete a playlist if, for instance, you want to programme a new one, 1 run the playlist that you want to delete and 2 press the softkey assigned to CLR PRG . Deleting all playlists in memory If you ...
Page 81 - CD changer mode; Inserting CDs in the CD changer; Switching to CD changer mode; COCKER
81 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH CD changer mode You can use the following Blaupunkt CD changers with the TravelPilot: - CDC - A08 - IDC - A09 Please refer to the installation and connection instructions supplied with yourCD changer...
Page 83 - Selecting a CD; Replaying tracks
83 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Selecting a CD To select a CD, 1 press the softkey assigned to the CD. If the required CD is not shown in the functions area of the display, open thesecond page of the main menu. 1 Press the softkey ...
Page 85 - Configuring SCAN for one CD or for all the CDs in the magazine
85 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Configuring SCAN for one CD or for all the CDs in the magazine The SCAN function provides you with the option of choosing whether only thetracks on the CD you are currently listening to should be sca...
Page 86 - Activating the repeat function for CDs
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 86 Activating the repeat function for CDs To repeat a CD, you first have to set the repeat function to CD . 1 In the setup menu, press the softkey assigned to RPT until CD appears. The settings are kept for all repeat functions in CD ...
Page 87 - Starting / stopping a playlist
87 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Repeat these steps for all the tracks that you want to include in your playlist. Astar is displayed in the main menu alongside the CD number or name to indicatethat a playlist has been programmed for...
Page 89 - Deleting characters
89 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH ✔ The currently highlighted letter is displayed in an enlarged fashion withinthe magnifier on the right of the display. 6 Press the right knob/pushbutton ; . ✔ The letter is entered into the name lin...
Page 90 - ON TRK
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 90 Deleting all names If you want to delete all the CD names from memory, proceed as follows: 1 Open the CD name menu and 2 press the softkey assigned to CLR ALL . ✔ A confirmation request appears. If you are sure you want to delete a...
Page 91 - Press the TA button
91 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Activating / deactivating traffic announcements(CD changer) To switch traffic announcement standby (see “TA (Traffic Announcement)” inthe “Radio mode” chapter) on / off during CD changer mode, 1 Pres...
Page 92 - Steering wheel remote control; Selecting an audio source; Briefly press the SRC button on the remote control.; Activating navigation; Entering a destination using the steering wheel remote control
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 92 Steering wheel remote control The RC 10 steering wheel remote control allows you to safely and convenientlyaccess some of the TravelPilot’s primary functions from your steering wheel.The / , / and OK buttons on the remote control h...
Page 93 - Muting; Cancelling mute
93 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Muting You can mute the unit using the remote control. 1 Press the button. Cancelling mute If you want to cancel mute, 1 press the button again or 1 press the V+ or V- button. REMOTE CONTROL
Page 94 - Setup - basic settings; Activating the setup menu; DISPLAY
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 94 Setup - basic settings Setup mode allows you to adjust the TravelPilot’s basic functions to suit yourneeds. You can change the following device functions: • DISPLAY - Changing the display characteristics • VOLUME - Setting the defa...
Page 95 - Automatic changeover to night display
95 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Setting the day / night changeover, viewing angle and dis-play brightness You can deactivate the automatic changeover to night-time display and adjustthe display brightness for the night and day disp...
Page 96 - Adjusting the display brightness; Adjusting the fading effect for menus; SETTINGS
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 96 Adjusting the display brightness You can adjust the display brightness separately for the day and night display. Ifyou want to adjust the display brightness, 1 use the right knob/pushbutton ; to select the DAY or NIGHT item that yo...
Page 97 - VOLUME
97 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH The power-on volume is a limiting value. This means that if the volume whenyou switch the unit on is lower than the configured power-on volume, the volumelevel that was last set will be applied. If t...
Page 98 - Setting the clock; Switching the status clock on/off
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 98 Setting the clock In the CLOCK setup menu, you can activate / deactivate summer time, set the time format (12/24 hour), and set the time zone in relation to the standard time(GMT). These settings are necessary so that the TravelPil...
Page 99 - Setting the time zone
99 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Setting the time zone 1 Highlight the CLOCK menu item in the setup menu. 2 Select SETTINGS . 3 Highlight the TIME ZONE menu item. 4 Adjust the time difference using the right knob/pushbutton ; . The ...
Page 100 - Selecting the language
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 100 7 Adjust the minutes using the right knob/pushbutton ; . 8 Press the right knob/pushbutton ; . Selecting the language You can set the language for the displays and navigation. There are variouslanguages available depending on the ...
Page 101 - Calibrating the device; Calibrating after installation (new installation); Cancelling calibration; SYSTEM TEST
101 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Calibrating the device The INSTALLATION setup menu contains all the necessary items for preparing the TravelPilot for operation once it has been installed. Calibrating after installation (new instal...
Page 102 - DISTANCE
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 102 Note: No navigation is possible during the first 25% of the calibra-tion procedure after NEW INSTALL is selected. The route that you have to drive along depends on various factorssuch as the quality of GPS reception and the route ...
Page 103 - Carrying out the system test; Activating / deactivating the code feature
103 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH 7 Use the right knob/pushbutton ; to select START . 8 Carry out the steps as instructed by the system. Carrying out the system test You have the option of carrying out a system test. The system chec...
Page 104 - Resetting to the factory defaults
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 104 Resetting to the factory defaults You can reset the TravelPilot to its default settings. This affects all the settingsfor the navigation system and the audio sources. 1 Select DEFAULT SET. from the setup menu. Step 1: If a navigat...
Page 105 - Setting seek tuning sensitivity
105 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Setting seek tuning sensitivity You have the option of setting the seek tuning stop sensitivity for automatic seektuning mode. The default setting is BEST . 1 Use the right knob/pushbutton ; to sele...
Page 106 - Factory default settings; Setting
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER 106 Factory default settings The following table contains the factory default settings for the TravelPilot. Setting Default setting DisplayDay / night On Viewing angle 6 Brightness day 7 Brightness night 5 Special effects 0 VolumePowe...
Page 107 - Code feature
107 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Code feature Off RadioRDS-REG Off PTY On RDS Var TA On SHARX On Radiotext Off Seek tuning sensitivity Best CD audioPlaying time display On CD changerPlaying time display On Scan CD Mix CD Repeat Tra...
Page 109 - Index
109 INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER ENGLISH DEUTSCH DEUTSCH DEUTSCH Index A Alternative frequency ............................ 57 B Balance ................................................. 14Basic settings ........................................ 94Bass ..............
Page 111 - Blaupunkt GmbH
Country: Phone: Fax: WWW: Germany (D) 0180-5000225 05121-49 4002 http://www.blaupunkt.com Austria (A) 01-610 390 01-610 393 91 Belgium (B) 02-525 5454 02-525 5263 Denmark (DK) 44 898 360 44-898 644 Finland (FIN) 09-435 991 09-435 99236 France (F) 01-4010 7007 01-4010 7320 Great Britain (GB) 01-89583...
Blaupunkt 7 649 020 110
Manual
Blaupunkt Acapulco CD51
Manual
Blaupunkt CD70
Manual
Blaupunkt LOUISIANA RCM 148
Manual
Blaupunkt RD 169
Manual
Blaupunkt 520
Manual
Blaupunkt MPA160us
Manual
Blaupunkt Alaska CJ70
Manual
Blaupunkt RCM 85
Manual
Blaupunkt IVMS-6502
Manual
Blaupunkt Miami CD72
Manual
Blaupunkt LS 162e
Manual
Blaupunkt RCM 149
Manual
Blaupunkt Mnchen CD51
Manual