Blaupunkt DVD- Manuals

Blaupunkt DVD– Installation Manual in PDF format online.

Manuals:

Installation Manual

Installation Manual Blaupunkt DVD

Summary

Page 2 - Precautions

2 Safety Precautions Contents Precautions • Use only in a 12-volt DC negative-ground electrical system. • When replacing the fuse, be sure to use one with an identical amperage rating. Using a fuse with a higher amperage rating may cause serious damage to the unit. • DO NOT attempt to disassemble th...

Page 3 - Panel Controls

3 ENGLISH Panel Controls 1. Disc eject2. - Radio - Disc play (when disc inserted) - USB (when USB connected) - Card (when SD/MMC card inserted) - AUX-IN 3. & 4. - Radio tune - Track seek 5. Radio local/distant6. Panel release7. AUX-IN jack8. Band switch: FM1, FM2, FM3, MW1, MW2 9. - Disc playbac...

Page 4 - Remote Controls

4 Remote Controls 1. Zoom (DVD/VCD only) 2. Title (DVD only) 3. Power on/off 4. Setup 5. Menu cursor 6. Enter 7. Program 8. Digit area 9. - Short press to select audio menu, and rotate the knob to adjust level. - Long press to enter into setting menu, then each press changes the mode. 10. Volume 11....

Page 6 - Auxiliary Input; General Operation; Clock Display

6 - TREB F1-4 Display shows the TREBLE frequency.F1=10K, F2=12.5K, F3=15K, F4=17.5K. - BASS Q1-4 Display shows the BASS Q-Factor.Change the sharpness of the Bass output.The larger the Q-Factor, the sharper the BASS. - MID Q1-4 Display shows the MIDDLE Q-Factor.Change the sharpness of the Mid output....

Page 7 - Radio Mode

7 ENGLISH Radio Mode Selecting a Band Press BAND once or more to select FM1 - FM2 - FM3 - MW1 - MW2.Display shows wave band, frequency, and pre-set station number if already stored. Selecting a Station Press the or tuning button to tune to another station. Tuning - AUTO SEEK Press the or buttons to ...

Page 8 - Take out USB Device

8 USB/SD/MMC Mode 1. Load SD/MMC Card Insert the SD/MMC card into the slot. The unit will read the file of the card automatically. 2. Take out SD/MMC Card Press SRC button to non-SD mode, press the SD/MMC card to pop out. 3. Load USB Device Insert USB device into the USB jack. The unit will read the...

Page 9 - Disc Mode

9 ENGLISH Disc Mode Accessing Disc Mode If a disc is already in the disc slot but is not playing, press the SRC button on the front panel or on the remote control to switch to the DISC source. To play files from an SD or USB that is already inserted, choose the CARD or USB source. If a external moni...

Page 10 - Category Select; Folder Select; File Select; Entering ID3 Tag

10 Audio/Picture/Video File Playback When AUDIO/PICTURE/VIDEO file is played, Category/Folder/File list will be displayed on the external screen, and file/folder name being played will be displayed on top. Current se-lected item will be highlighted. Category Select Use / on the remote control to sel...

Page 14 - DVD Setup; DVD Language Setup

14 DVD Setup - PASSWORD 1. Press number button " 0000 " on the remote control, then press the ENTER button to confirm. 2. Press the desired 4-digit password, and then press ENTER button to confirm. 3. Record the password and keep it in a safe place for future reference. Note: If you forget t...

Page 15 - DVD Video Setup

15 ENGLISH DVD Video Setup Use / , / to select and ENTER to con- firm. - BRIGHTNESS Set the brightness of the video output with / from 0 to 12. - CONTRAST Set the contrast of the video output with / from 0 to 12. - HUE Set the hue of the video output with / from -6 to +6. - SATURATION Set the satura...

Page 16 - Electrical Connections; Wiring Diagram

16 Electrical Connections Wiring Diagram Purple Grey Grey/Black Stripe White/Black Stripe White Green/Black Stripe Right Speaker (Rear) Right Speaker (Front) Left Speaker (Front) Left Speaker (Rear) Filter Box Ground Lead To car battery (+) continuous +12V DC Black Yellow Blue Red Motor/Electric Ant...

Page 17 - Removing the Panel; Installing the Panel; Removing the Unit

17 ENGLISH This unit is equipped with a detachable panel.Panel can be detached and taken with you, helping to deter theft. Removing the Panel 1. Switch off the power of the unit.2. Press button. 3. At an angle hold the panel to pull it out.4. Place the panel into the case and take it with you when y...

Page 18 - Installation Guide; Installation Procedures; Installation Opening

18 Installation Guide Installation Procedures First complete the electrical connections, and then check for correctness. Reset Press button. At an angle hold the panel to pull it out. Then press the RESET button with a pointed object to reset the unit to the original status. Note: Press the RESET bu...

Page 19 - Troubleshooting

19 ENGLISH Troubleshooting If you suspect something is wrong, immediately switch power off. Immediately stop using it and call the store where you purchased it. Never try to repair the unit yourself because it is dangerous to do so. Problem Possible cause Solution General No power or no sound. Car i...

Page 20 - Specifications

20 Specifications General Power supply: 12 V DC (11 V - 16 V) Test voltage 14.4 V, negative ground Maximum power output: 40 W x 4 channels Continuous power output: 20 W x 4 channels (4 Ω 10 % T.H.D.) Maximum current consumption: 12 ASuitable speaker impedance: 4 - 8 ohm Pre-Amp output voltage: 2.0 V...