Blaupunkt CD169 - Manuals - manualsarea.com

Page 2 - Precautions; Features; FCC WARNING; Handling Compact Discs; Handling the Front Panel; Front Panel Open / Close; Panel open; Panel close

E-1 Precautions This equipment has been tested and found to comply with thelimits for a Class B device, pursuant to Part 15 of the FCCRules. These limits are designed to provide reasonable pro-tection against harmful interference in a residential installa-tion. This equipment generates, uses, and ca...

Page 3 - Notes; Identification of Controls; Detaching the Front Panel; Security; Ejecting the CD

E-2 Notes • Be sure to use this unit with the front panel closed. The unit is automatically switched off when the front panelis left open for about 10 minutes. • Do not handle the unit roughly when opening/closing the front panel. • Do not put any object or use it like a tray when the front panel is...

Page 4 - General Operations; Volume Level Control and Memory; Note; Muting the sound; Ignition-off Clock Recall; Display priority setting; Adjusting the Sound Characteristics

E-3 General Operations Volume Level Control and Memory Rotate the dial to set the memory for the volume level whichwill be recalled when the unit is turned on. 1. Adjust the volume level. Spinning or fast rotation of the dial knob will increase the number of turns needed toreach max. volume. 2. Hold...

Page 5 - Radio Reception

E-4 Radio Reception Receiving the Memorized Stations 1. Press the BND / TS to select the desired band. 2. Press the 1 - 6 momentarily. Local/Distant (LO/DX) Selection This feature is used to select the strength of the signals atwhich the radio will stop during Seek Tuning. Press the MUTE / SENS for ...

Page 6 - Storing the station names; Erasing the station names

E-5 Storing the station names You can assign a name to each radio station and store it inmemory. As many as 30 station names can be stored, com-posed with 8 characters each. Storing the station names 1. Tune in a station whose name you want to store. 2. Press the DISP for more than 2 seconds. The “ ...

Page 7 - CD Operations; Playing the CD player

E-6 CD Operations Listening to a disc that is already loaded Press the CD to select the CD mode. Playback begins automatically. Pausing Playback Press the 6 / . To resume playback, press the 6 / again. Stopping Playback Press the BND / TS to select the radio reception (FM 1, FM 2, FT or AM, AT). Eje...

Page 8 - Installations; Supplied Mounting Hardware; Mounting Example; Mounting Strap Use

E-7 Installations Supplied Mounting Hardware Sleeve Bushing Mounting Strap Release & Screws and Screw Keys Precautions • Be sure to detach the front panel before you start in- stalling the unit. • When mounting the unit in a car, keep the unit as level as possible. If the unit must be mounted at...

Page 9 - Connections; Caution; Connection procedure; Warning; Connection Example

E-8 Connections Caution • Connect each pair of speaker leads only to a single speaker (or speaker system) that has an impedance of least 4 ohms,as well as 42 watts power-handling capability. • Do not connect speaker leads to any inputs on external amplifiers. This will cause damage to the internal a...

Page 10 - Maintenance; Removing the Unit; Replacing the Fuse; Cleaning the Connectors; Returning to the Initial Settings

E-9 Maintenance Removing the Unit Use the supplied release keys when you need to remove theunit from the car.Insert the “ TOP R ’’and “ TOP L ’’of the release keys on theright and left position until it clicks respectively, to remove theunit. Reset button Replacing the Fuse If the fuse is blown, che...

Page 11 - CD Player Troubleshooting; Specifications; GENERAL; Troubleshooting Guide; General

E-10 CD Player Troubleshooting When problems occur with CD playback, an error messageappears in the display window.Refer to the table below to identify the problem, then take thesuggested corrective action. If the “ MECA ERR ” appears or“ SW ERROR ” persists, contact your nearest Blaupunktdealer. Me...