Blaupunkt BT HS 112- Manuals

Page 4 - Adjusting and wearing BT HS 112; – Attach the ear hook onto the headset as shown in the fi gure.

4 Adjusting and wearing BT HS 112 The headset can be worn on the left or right ear. The ear plug is supplied in three diff erent sizes. Replace the ear plug if it does not fi t correctly. – Position the headset on your ear so that its fi t is secure and convenient.To provide additional support, you ...

Page 5 - Battery information; Ensure that the battery is fully charged if you do not use the

5 Battery information The headset is equipped with an integrated lithium-polymer battery. The battery cannot be replaced. The full performance of a new battery is not achieved until after two or three complete charging-discharging cycles. The battery can be charged and discharged several hundred tim...

Page 6 - Charging the battery; The headset may not be used during the charging process.

6 Charging the battery The BT HS 112 is operated with a rechargeable battery. Charge the battery completely before its fi rst use. The charging process of the battery lasts approx. 1 hour. Read the section "Battery information" before starting the charging process. Risk of injuries! The head...

Page 7 - Switching on

7 Overview 9 8 3 2 1 4 5 6 7 Volume button + Volume button – MF button (multifunction button) USB charging socket Loudspeaker Ear plug Ear hook Microphone LED display Switching BT HS 112 on/off Switching on Press the MF button for approx. 3 seconds until you hear a high-pitched signal tone and the L...

Page 8 - Registering (pairing) and connecting with the cell phone; – Hold the BT HS 112 within range of a Bluetooth-ready cell phone the

8 Registering (pairing) and connecting with the cell phone Before you can use the BT HS 112, you must register and connect it with a Bluetooth-ready cell phone. Registering is a one-time process and required only for the fi rst connection with the cell phone. The BT HS 112 can be reg-istered with up...

Page 9 - Establishing a connection with two cell phones; The BT HS 112 can be connected with two cell phones at the same time.; Automatic connection

9 Establishing a connection with two cell phones The BT HS 112 can be connected with two cell phones at the same time. – Automatic connection When switching on the BT HS 112, a connection is automatically estab-lished with the two most recently connected cell phones. – Establishing a connection via ...

Page 10 - Operating the BT HS 112

10 Operating the BT HS 112 Making a call – Voice dialling* To activate voice dialling, briefl y press the MF button. You hear several signal tones. After the signal tone, speak the voice command. After the voice command has been recognized, the cell phone dials the number associated with it. Note: I...

Page 11 - in the operating instructions of the cell phone.

11 Transferring a call To transfer a call from the headset to the cell phone, press the volume but-tons "+" and "–" at the same time. Repeat the step to transfer the call back to the headset. Note: With some cell phones, the connection is disconnected if you transfer the call to the ...

Page 12 - Device status

12 Resetting the BT HS 112 The BT HS 112 can be registered with up to eight cell phones. You can delete the list of registered phones and reset the headset to the factory settings. – The BT HS 112 must be switched on and no connection may exist to a cell phone. – Press and hold down the "+" ...

Page 13 - Fault removal; – Ensure that the battery is charged.; Declaration of conformity

13 Fault removal If a connection between the BT HS 112 and a cell phone cannot be established, observe the following: – Ensure that the battery is charged. – Ensure that the Bluetooth function of the cell phone is activated. You fi nd more detailed information in the operating instructions of the ce...

Page 14 - Technical data; supports Bluetooth version 2.1 or a more current version.

14 Technical data Bluetooth specifi cation Version 3.0 + EDR (Enhanced Data Rate) + SSP (Secure Simple Pairing)* Supported Bluetooth profi les Headset and hands-free profi les Frequency range 2.4 to 2.48 GHz ISM band Bluetooth range Up to 10 metres (Class 2) Dimensions (LxWxH) 36 x 16 x 27 mm Weight...

Page 15 - General; Interference Warning:; that may cause undesired operation; is a registered trademark of Bluetooth SIG, lnc.

15 FCC-Statements All following FCC statements are valid for the Industry Canada Standard (IC) as well. General Interference Warning: (according to FCC part 15.19) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause ...