Blaupunkt BREMEN RCM 127- Manuals

CD - Betrieb (Option) 7 DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS 8 S (select)Press S briefly:The current time will appear in the display header.The menu for the sound settings will appear in the display.Press / to retrieve the function you would like to alter. Press / o...

CD - Betrieb (Option) 9 DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS > KeyCard anti-theft systemYou must insert the KeyCard in order to be able to operatethis set. KeyCard Inserting the KeyCardWhile the KeyCard tongue is protruding out of its opening,insert the KeyCard i...

10 The KeyCard anti-theft system One KeyCard is included with the set. You can, however, also use a second KeyCard with your set. You can purchasea second KeyCard at any specialised dealership. Starting up the unit • Press ON to switch the set on.With the KeyCard tongue protruding out of its opening...

CD - Betrieb (Option) 11 DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS Removing the KeyCard • Press the KeyCard tongue. The KeyCard can now be removed.• Pull the KeyCard out of the slot. “Training” the second KeyCard / replacing the KeyCard A KeyCard can be “trained” as an a...

12 Displaying the radio pass data After inserting the original KeyCard, you can have the radio pass data such asthe model name, the product number (7 6...) and the serial number shown in thedisplay.• Insert the original KeyCard and switch the unit on. • Press S for approximately 1 second. DSC-MAIN M...

CD - Betrieb (Option) 13 DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS Optical indication of anti-theft protection Flashing KeyCard tongue When the radio has been switched off and the KeyCard removed, the KeyCardtongue can be programmed to flash as a warning to thieves. The ...

14 Detailed operating instructions First-time installation If the set is switched on for the first time or after the power supply has beendisconnected, FIRST INSTALL will appear in the display header. Using this menu you can adjust the following settings: CLOCK Set the clock OWNER-ID Enter proof of ...

CD - Betrieb (Option) 15 DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS • Press << / >> to select the entry position.If you are at one of the end positions (first or last character), you can movedirectly to the opposite end position by pressing << / >>...

16 S AUX-INNORM SET FIRST INSTALL CLOCKOWNER-ID EXIT S PLEASE WAIT ALL ADJUSTMENTS ARE SET TO DEFAULT VALUES Resetting to original factory settings Using NORM SET you can return all of the altered settings except for the current time to the original factory settings. Warning!You will delete all of t...

CD - Betrieb (Option) 17 DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS Radio operation with RDS (Radio Data System) This radio is equipped to receive the following wavebands: FM, MW and LW. In combination with the two FM tuners, the Radio Data System guarantees ex-cellent re...

18 Switching from the reception table to the preference table During FM reception, you can choose whether you want to display the receptiontable including all of the stations currently within reception range or the prefer-ence menu with all of the stations you have previously stored.The display head...

20 . . . with SCAN The SCAN feature will briefly play all of the stations listed in the table displayed. FM SCAN If the reception table is displayed, all of the FM stations within reception rangewill be scanned. If the preference table is displayed (display header highlighted), all of the storedFM s...

CD - Betrieb (Option) 21 DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS Select SEARCH menu:• Press TU, MW or LW , SEARCH If no stations have been stored on the MW waveband it is not possible to selectSEARCH. SCAN can only be used in the SEARCH menu. Start SCAN:• Press SCAN . ...

22 Storing MW/LW stations Up to 8 MW stations from the search menu can be stored in the preference table.8 LW stations have already been stored in the preference table. Select search menu to store stations:• Press TU, MW or LW , SEARCH If no stations have been stored on the MW waveband it is not pos...

CD - Betrieb (Option) 23 DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS RDS information (RDS - Radio Data System) RDS offers you more convenience when listening to FM radio. Most radio sta-tions now transmit RDS information along with their regular programming. RDS offers you...

24 REG – Regional programmes At certain times of the day or on a permanent basis, certain radio stations dividetheir FM programmes into different regional programmes providing local infor-mation. You can select these regional programmes directly from the reception or prefer-ence table. If you are li...

CD - Betrieb (Option) 25 DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS REG indicates that the regional programme function is switched on. The letter following (A to L is possible) indicates which regional programme has been se-lected. If you are currently somewhere where sev...

26 Programme type Use the softkeys or to select the programme type, use or to “turn” to the next page. You can use DSC to switch the language to German, English or French (refer to“Programming with DSC – TUNER, PTY LANG”). All of the programme types listed below are available. The letters printed in...

CD - Betrieb (Option) 27 DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS Switching PTY on / Selecting the programme type You can activate the PTY menu in the main radio menu. In the PTY menu youcan select the programme type. • Press TU. FM will be highlighted in the display. •...

28 Giving radio stations a name If only the frequency of a radio station is displayed, it is possible to give thisstation a name with up to 8 characters. It is not possible to name RDS stationswhich already have a station name. Start entry:• Press S for approximately 1 second. DSC-MAIN MENU will app...

CD - Betrieb (Option) 29 DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS Traffic message reception with RDS-EON The abbreviation “EON” stands for Enhanced Other Networks, meaning theexchange of information within a radio network. Many FM radio stations offer traffic messages f...

30 Switching the priority on/off: • Press TA . Interrupting a traffic message when it is being broadcast: Press EXIT or SRC on the remote control during the message. This inter- rupts the priority for this message only. The set will then switch back to the previous mode of operation. The recording o...

CD - Betrieb (Option) 31 DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS If no such station is found within approximately 30 seconds, you will hear a warn-ing beep every 30 seconds. Switch the warning beep off as described above. Adjusting the volume for traffic announcements ...

32 Traffic Memo (TIM) This set is equipped with a digital speech memory which can automatically recordup to four traffic messages lasting a maximum of four minutes. As soon as TP appears in the display, the system will record all incoming traffic messages broadcast by the station when the radio is s...

CD - Betrieb (Option) 33 DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS Setting the exact time TIM needs the exact time in order to operate precisely. Note that the clock alsohas to be reset after any interruption in the power supply. If the time display ishighlighted there h...

34 Using the DSC MAIN MENU• Press S for approximately 1 second. DSC-MAIN MENU will appear in the display header. • Press VARIOUS , CLOCK one after the other and set the correct time. Programming the TIM standby mode / TIM times You can programme two TIM times (TIMER 1 and TIMER 2). For example, TIME...

CD - Betrieb (Option) 35 DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS Checking TIM times: The TIM time of the timer marked by a highlighter bar will appear in the displayheader. If you want to see the time set for the other timer,• press the corresponding key or . Setting T...

36 Fast forward or reverse in a message: Press and hold down CUE or REVIEW and you will be able to hear the message as it is fast forwarded or reversed. End playback: Playback will stop automatically after T1 has been played. You can end the playback immediately by• pressing TIM, EXIT or SRC on the ...

CD - Betrieb (Option) 37 DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS Manually: Select the TIM menu by• pressing TIM for approximately 1 second while the radio is switched on. • Press ACTIVE to switch the TIM standby mode on or off. If ACTIVE is not highlighted, then the TI...

38 TIM-FUNCTION DEACTIVATED will appear briefly in the display. The antenna will retract (please check to be sure) and will stay that way until theunit is switched back on. Now the TIM standby mode is temporarily inactive. You can drive into the car wash. The standby function will be automatically r...

CD - Betrieb (Option) 39 DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS Cassette operation The car radio must be switched on. The unit automatically switches to tape operation when a cassette is inserted. Ifa cassette is already inserted in the tape player you can switch to t...

40 Fast forward/Fast rewind Fast forward Fast rewind / Select a recorded title (S-CPS) forwardsreverse Stop the function by pressing the opposite key. Selecting a recorded title with S-CPS (Super cassette programme search) Press (forwards) / (reverse) to repeat or skip recorded titles You can skip o...

CD - Betrieb (Option) 41 DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS Switching tracks (REVERSE) To change the tape track during cassette playback:• Press REVERSE . At the end of a track, the tape player will automatically change directions to playthe other side of the tape...

42 Dolby B•C NR* Noise reduction for playing cassette tapes in the best possible quality for thesystem. Dolby C-NR is an improvement on the Dolby B-NR system and reduces undesir-able noise still further. Depending on how the tape has been recorded, select the corresponding type ofplayback: Dolby B-N...

CD - Betrieb (Option) 43 DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS Skipping unrecorded tape portions(B-SKIP = Blank Skip) If this function has been activated, it will detect any unrecorded tape portionwhich is longer than 15 seconds. The tape player will automatically fa...

44 CD changer operation (optional) This car radio offers you convenient control of a Blaupunkt CD changerCDC-F 07. This changer is not included with the car radio equipment and is available forpurchase from any specialised dealer. Note: Use only perfectly circular CDs. CDs manufactured in the shape ...

CD - Betrieb (Option) 45 DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS Selecting a CD and a track The display header will indicate the current selection. Selecting a CD up down You can also select a CD directly by pressing the corresponding softkey / . Selecting a track up: ...

CD - Betrieb (Option) 47 DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS Repeat a CD or a track (REPEAT) You can repeat any CD or track (continuously). Select the changer functions menu. If necessary,• press CDC. • Press REPEAT until the desired function appears briefly in the...

CD - Betrieb (Option) 49 DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS b) Deleting the TPM memory for one CD: • Press TPM␣ CLR for approximately 4 seconds. TPM DISC␣ CLRD will appear in the display header. You will hear a beep at the same time. This CD has been deleted in th...

52 AUX mode External equipment can be connected to this stereo system.a) Any type using AUX-IN, e.g. a Walkman b) A navigation unit (expected to be available starting mid 1997) Switching on AUX AUX must be activated in the FIRST INSTALL menu. • Press AUX. The AUXILIARY MENU will appear in the displa...

CD - Betrieb (Option) 53 DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS S FADERBALANCELOUDNESS EQ DNC TREBLE +5 TREBLEBASS EXIT Audio settings Bass, treble, balance, fader You can alter the settings for BASSTREBLEBALANCE left/rightFADER front/rear. BASS and TREBLE can be set ...

54 DNC – Dynamic Noise Covering With the help of DNC it is possible to enjoy the same volume while driving thatyou find pleasant in the stationary vehicle. The volume is increased at different rates for different frequency bands, depend-ing on the noise in the moving vehicle. In this way, the volume...

CD - Betrieb (Option) 55 DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS Adjusting DNC sensitivity You can select three different levels for adjusting the volume:DNC-LEVEL LOW, -MID, -HIGH. Select DNC-LEVEL LOW if the vehicle is loud and the music has a distinct basssound.Sele...

56 EQ (Equalizer) Equalizer functions The quality of the stereo playback inside your vehicle is affected by such factorsas the vehicle interior (upholstery, windows), the position of the loudspeakers,etc. Using the integrated equalizer, it is possible to adjust nine frequency bands perchannel:63 Hz,...

CD - Betrieb (Option) 57 DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS Hi-fi calibration You can set and store automatic calibrations for three different situations. The calibrations are started and called up using the softkey ( ). You can select the following settings:AUTO-...

CD - Betrieb (Option) 59 DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS • Press << / >> to select the frequency band you wish to correct, e.g. 1 kHz.The selected frequency band will appear in the bottom line. • Press / to adjust the frequency range as desired. Aft...

60 Setting the equalizer manually If you would rather set the equalizer manually, you can set nine different frequen-cy bands from 63 Hz to 16 kHz for the front and rear loudspeakers separately. In this case,• press S, EQ and MAN-EQ if necessary one after the other. MAN-EQ (manual equalizer) must be...

CD - Betrieb (Option) 61 DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS Programming with DSC The car radios have been pre-programmed at the factory. Using the DSC (Direct Software Control) MAIN MENU you can customise certainsettings and functions to suit your own personal nee...

64 AUTO POS/NEG -Automatic switch.When the vehicle lights are switched off, thecharacters appear positively. When the vehiclelights are switched on, the characters appearnegatively. MENU OFF Menu or selected function displayIf MENU OFF is activated (highlighted), the con-tents of the display header ...

CD - Betrieb (Option) 65 DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS VOL FIX Set the volume at which the car radio will playwhen first switched on.Press << / >> to set the desired volume. If youselect “VOL +00” the unit will begin playing at thevolume set befor...

66 Muting the audio source while using the car phone If you operate a car phone in your vehicle, you can have the radio, tape player,CD changer (optional) automatically switch to mute (telephone mute). PHONE will then appear in the display. Traffic messages will have priority if TA has been activate...

CD - Betrieb (Option) 67 DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS Specifications Output power: 4 x 23 W RMS power acc. to DIN 45324 at 14.4 V4 x 35 W max. power TunerWavebands:FM : 87.5 – 108 MHz MW : 531 – 1602 kHz LW : 153 – 279 kHz FM sensitivity: 0.9 µ V at 26 dB si...

68 Blaupunkt telephone hotline Address of the next service centre in your vicinity(only for Germany) If you would like to know the address of the next Blaupunkt service centre ofyour area without having our service list at hand:- Find out your area code. - Then call the following chargeable phone nu...