Bertazzoni M93 - Manuals - manualsarea.com

Page 2 - INSTALLER TECHNICAL MANUAL; INSTALLER INFORMATION

2 CONTENTS: INSTALLER TECHNICAL MANUAL ............................................................................................................... pg. 2 Installing the cooker - Installation information .................................................................................................

Page 3 - Legs are packed in the top box.; BACKGUARD INSTALLATION INSTRUCTION; Follow the instructions below to change the oven burner nozzle:; to what is indicated in Table 1

3 ROOM VENTILATION To ensure that the appliance operate correctly, the room where it is installed must be continuously ventilated. The room volume should not be less than 25 m³ and the quantity of air needed shall be based on the regular combustion of gas and on the ventilation of the room. Natural ...

Page 4 - II; BURNER ADJUSTMENT; and adjust the position; Work surface burner adjustment; : follow the instructions below to adjust the minimum:; APPLIANCE ELECTRIC CONNECTION:; ground symbol

4 TABLE N°1: Adaption to various types of gas APPLIANCE CATEGORY: II 2H3+ Burner Types of Gas Pressure Nozzle Diameter Rater Capacity Reduced Capacity by-pass Diameter mbar 1/100 mm. g/h l/h kw kcal/h kw kcal/h 1/100 mm. Natural G20 20 72 - 95 1 860 0,48 413 34 reg. Auxiliary Butane G30 30 50 73 - 1...

Page 5 - TYPES OF POWER CORDS; Only gas burner

5 - The power cord must be positioned so that an overtemperature of 75 K will not be reached at any point. - Do not use reductions, adapters or splitters since they might cause false contacts and lead to dangerous overheating. When the connection is made directly to the electric network: - Use a dev...

Page 6 - USE AND MAINTENANCE MANUAL; Burner Dimension; CONTROL PANEL DESCRIPTION

6 To replace parts such as nozzle supports, valves and electric components follow the procedure described in the burner adjustment paragraph. To replace the valve or the gas thermostat, it is also necessary to disassemble the two rear gas train brackets, loosening the 4 screws (2 per bracket) that a...

Page 7 - Tips for using burners correctly:; TABLE N°6; The oven burner can be ignited in different ways:

7 Tips for using burners correctly: - Use suitable pots for each burner (see tab. 4 and Fig. 26). - When the liquid is boiling, turn the knob to the MINIMUM position (small flame Fig. 24). - Always use pots with a cover. TABLE N°5 BURNER PAN DIAMETER recommended (cm) Auxiliary 12-14 Semi-rapid 14-26...

Page 8 - USING THE ELECTRIC THERMOSTAT (left oven); indicates that only the oven light is turned on

8 WARNING: when trying to light the oven, the door must always be open. When using the oven, leave the cooker cover open to prevent it from overheating. NOTICE: when using the oven for the first time it should be operated for 15-30 minutes at a temperature of about 250° without cooking anything insi...

Page 10 - TABLE N°7; USING THE VENTILATED ELECTRIC OVEN (left oven); TABLE N°8

10 TABLE N°7 NATURAL CONVENTIONAL ELECTRIC OVEN COOKING TABLE TEMP °C HEIGHT MINUTES MEAT PORK ROAST 225 3/4 60-80 BEEF ROAST (YOUNG STEER) 225 3/4 60-80 BEEF ROAST 250 3/4 50-60 VEAL ROAST 225 3/4 60-80 LAMB ROAST 225 3 40-50 ROAST BEEF 230 3/4 50-60 ROAST HARE 250 3/4 40-50 ROAST RABBIT 250 3 60-8...

Page 11 - USING THE CONVENTIONAL ELECTRIC GRILL; Grilling on the shelf; USING THE VENTILATED ELECTRIC GRILL; Cleaning the STAINLESS steel parts:

11 PASTRY FRUIT PIE 180-200 2 40-50 TEA CAKE 200-220 2 40-45 BRIOCHES 170-180 2 40-60 SPONGE CAKE 200-230 2 25-35 RING CAKE 160-180 2 35-45 SWEET PUFF PASTRIES 180-200 2 20-30 RAISIN LOAF 230-250 2 30-40 STRUDEL 160 2 25-35 SAVOIA COOKIES 150-180 2 50-60 APPLE FRITTERS 180-200 2 18-25 SAZOIARDI SAND...

Page 12 - remove burner fat if used gently.; AFTER-SALES TECHNICAL SERVICE AND SPARE PARTS; Fig. 3 Fig. 4 Fig. 5

12 Cleaning the burner flame caps: Since the flame caps are resting on the burner, to clean them just remove them from their seat and wash them with soapy water. After they have been thoroughly dried and having checked that the holes are not clogged, they can be replaced in their proper position. Cl...