BEHRINGER CT100 - Manuals

CABLE TESTER CT100 2 1. INTRODUCTION Congratulations! With the CT100, you have purchased an indispen- sable tool that enables you to easily check the most common cables used by musicians and sound engineers. Faulty cables are a common cause of failure in live and studio situations. This micro- proce...

CABLE TESTER CT100 3 3. INSTALLED CABLE TESTER MODE This mode enables you to test cables in fixed installations or situations that don’t allow you to connect both ends of the cable to the CT100. + Hold down the RESET button while moving the ON switch to the CABLE TESTER position. The ON LED will bli...

CABLE TESTER CT100 4 TEST TONE MODE may be used to check signal flow and to facilitate level adjustments. It routes a test tone to the “+ pin” (pin 2/tip) of all OUT jacks. Use the TEST TONE LEVEL switch to choose between +4 dBu, -10 dBV, or -50 dBV mic level. Please note that this mode is not inten...