BEHRINGER CT100 - Manual
BEHRINGER CT100 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – CABLE TESTER MODE; How to test intermittent connections
- Page 3 – INSTALLED CABLE TESTER MODE; Continuity check in INSTALLED CABLE TESTER MODE
- Page 4 – PHANTOM POWER DETECT
- Page 5 – MULTILINGUAL DOCUMENTATION
CABLE
TESTER
CT100
Version 1.0 April 2001
Users Manual
ENGLISH
www.behringer.com
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
CABLE TESTER CT100 2 1. INTRODUCTION Congratulations! With the CT100, you have purchased an indispen- sable tool that enables you to easily check the most common cables used by musicians and sound engineers. Faulty cables are a common cause of failure in live and studio situations. This micro- proce...
CABLE TESTER CT100 3 3. INSTALLED CABLE TESTER MODE This mode enables you to test cables in fixed installations or situations that dont allow you to connect both ends of the cable to the CT100. + Hold down the RESET button while moving the ON switch to the CABLE TESTER position. The ON LED will bli...
CABLE TESTER CT100 4 TEST TONE MODE may be used to check signal flow and to facilitate level adjustments. It routes a test tone to the + pin (pin 2/tip) of all OUT jacks. Use the TEST TONE LEVEL switch to choose between +4 dBu, -10 dBV, or -50 dBV mic level. Please note that this mode is not inten...
