BEHRINGER CX2310 - Manual - manualsarea.com

Page 2 - SAFETY INSTRUCTIONS; DETAILED SAFETY INSTRUCTIONS:

2 SUPER-X PRO CX2310 This symbol, wherever it appears, alerts y o u t o i m p o r t a n t o p e r a t i n g a n d m a i n t e n a n c e i n s t r u c t i o n s i n t h e accompanying literature. Read the manual. SAFETY INSTRUCTIONS CAUTION: To reduce the risk of electric shock, do not remove the cov...

Page 3 - FOREWORD; Uli Behringer

3 SUPER-X PRO CX2310 FOREWORD Dear Customer,Welcome to the team of SUPER-X PRO users and many thanks for the confidence that you have shown in us by purchasing the CX2310. It is one of my most pleasant tasks to write this letter to you, because after many months of hard work our engineers have achie...

Page 5 - TABLE OF CONTENTS; a more regular frequency response and dispersion pattern.

5 SUPER-X PRO CX2310 TABLE OF CONTENTS 1. INTRODUCTION ..................................................................................................................... 5 1.1 Before you begin ...........................................................................................................

Page 6 - Stereo 2-way operation with separate subwoofer signal; shown for only one channel.

6 SUPER-X PRO CX2310 2. CONTROL ELEMENTS + If the unit is damaged, please do not return it to us, but notify your dealer and the shipping company immediately, otherwise claims for damage or replacement may not be granted. Shipping claims must be made by the consignee. Be sure that there is enough sp...

Page 7 - stereo 2-way operation with separate subwoofer signal

7 SUPER-X PRO CX2310 2. CONTROL ELEMENTS 1 INPUT control. This control adjusts the input gain over the range from -12 to +12 dB. 2 LOW CUT switch. This switch activates the 25 Hz high-pass filter. It has a side gradient of 12 dB/octave and is used to protect your bass loudspeaker. 3 LOW/HIGH XOVER F...

Page 8 - Mono 3-way operation with separate subwoofer signal

8 SUPER-X PRO CX2310 2. CONTROL ELEMENTS 2.2 Mono 3-way operation with separate subwoofer signal First activate mono 3-way mode using the MODE switch on the rear panel (switch released). The MONO LED on the front panel above the LOW CUT switch lights up.Then the LEDs above the active control on the...

Page 10 - in the high tone ranges.; Setting the crossover frequencies

10 SUPER-X PRO CX2310 3. APPLICATIONS + BEHRINGER accepts no responsibility for any damage or destruction of loudspeakers arising from improper or incorrect use of the SUPER-X PRO and in particular from actions which are in contravention with the clearly stated procedures given in this manual. 3.2 S...

Page 11 - stones into waterfirst separately and then stuck together).; AUDIO CONNECTIONS; static charges might affect the operation of the unit.

11 SUPER-X PRO CX2310 4. AUDIO CONNECTIONS 3.5 SUBWOOFER Output To achieve a very loud and deep bass playback the SUPER-X PRO has an additional mono subwoofer output for 2-way and 3-way operation. In this sense the CX2310 is a stereo 2-way + mono 1-way or mono 4-way frequency crossover. The subwoofe...

BEHRINGER CX2310 - Manual

Table of Contents:

Summary

Other BEHRINGER Models