BEHRINGER AB100 - Manual
BEHRINGER AB100 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
INSTRUMENT/AMP SELECTOR AB100
Thank you for showing your confidence in us by purchasing the BEHRINGER
INSTRUMENT/AMP SELECTOR AB100. This high-quality instrument and amp switch
is designed for both guitar & bass players who use several amps or instruments.
The AB100 allows you to switch between gear noiselessly and instantaneously,
adjusting individual volume settings without coloring the sound of your instrument.
1. CONTROLS
Controls and connections
IN 1
: this 1/4" TS jack is the first AB100 input. Plug in an instrument here
(guitar, bass, etc.).
OUT A
: this 1/4" TS jack is the first AB100 output. Plug in an amp or an effect
here.
OUT B / IN 2
: this 1/4" TS jack can be used as a second output or a second
input, depending on the position of selector
.
The
MODE
selector adapts the AB100 to your system: If you play one
instrument and two amps, set MODE in the upper position to get one input for
two outputs. In this case, connector
serves as a second output (OUT B).
Otherwise, if you play two instruments and one amp, set MODE in the lower
position to get two inputs for one output. In that case, connector
serves
as a second input (IN 2).
Use the
A LEVEL
button to set the volume of OUT A. The output is active when
the green LED is lit.
When MODE is in the upper position, use the
B LEVEL
button to set the volume
of OUT B. The output is active when the red LED is lit.
Use the footswitch to noiselessly and instantaneously toggle between two
amps (MODE selector in the upper position) or two instruments (MODE selector
in the lower position).
Use the
DC IN
connection to plug in a 9 V power supply (not included).
The
BATTERY COMPARTMENT
is located underneath the pedal cover. To install or
replace the 9 V battery, press the hinges with a ballpen and remove the pedal cover. Be
careful not to scratch the unit.
+
The AB100 has no on/off switch. As soon as you insert the jack into the IN
connector, the AB100 begins running. When not using the AB100, remove
the jack from the IN connector. This extends the life of the battery.
The
SERIAL NUMBER
is located at the bottom of the unit.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
