B&B Electronics 485 RF - Manuals

B&B Electronics 485 RF – Manual in PDF format online.

Manuals:

Manual B&B Electronics 485 RF

1 Page 1
2 Page 2
3 Page 3
4 Page 4

Summary

Page 2 - Requirements for Range Test; Introduction; Install X-CTU Software; Loopback; by looping data back into the modem for retransmission. [Figure 1]; RPSMA antennas; Range Test Setup; NEMA; CAT5 cable

Requirements for Range Test 1 XTend-NEMA Weatherproof RS-232/485 RF Modem1 XTend-PKG-R RS-232/485 RF Modem (or a second XTend-NEMA)1 PC (Windows 98 SE, 2000 or XP) loaded with X-CTU SoftwareAccessories (CAT5 cable with DB-9/PWR adapter board, loopback adapter, 2 RPSMA antennas (one is inside the NEM...

Page 3 - Range Test Procedure; Range Test; Figure 3 Range Test tab; Figure 2. PC Se�ings tab; Setup a PC Serial Com Port for communications with the

2 3 Use the "PC Settings" and "Range Test” tabs of the X-CTU Software to: • • Range Test Procedure Range Test PC Com Port Default Values Default RF data rate is 9600 baud Other Default Values: Flow Control = None Data Bits = 8 Parity = None Stop Bits = 1 Figure 3 Range Test tab 5 6 Start...

Page 4 - Optional Configurations; Restoring Modem Defaults; Contact MaxStream; Using the RF Modem DIP Switch; Figure 4. DIP Switch Se�ings (Se�ings applied only when powering on); To Restore Defaults

Optional Configurations Out-of-box, the XTend-NEMA RF Modem is configured to provide immediate wireless links between devices. The modem's default configuration supports a wide range of RF communications.If the RF Modem must be configured to support specific needs of a data system, many programming ...

B&B Electronics Manuals