Axis M3007-P - Manuals

AXIS M3007–P Hardware Overview Network Connector RJ45 Ethernet connector. Supports Power over Ethernet (PoE). NOTICE NOTICE NOTICE The product shall be connected using a shielded network cable (STP) or an optical fiber cable. All cables connecting theproduct to the network shall be intended for thei...

AXIS M3007–P Accessing the Product Accessing the Product To install the Axis product, refer to the Installation Guide supplied with the product. The product can be used with most operating systems and browsers. The recommended browsers are Internet Explorer with Windows,Safari with Macintosh and Fir...

AXIS M3007–P Accessing the Product Set Power Line Frequency Power line frequency is set the first time the Axis product is accessed and can only be changed from Plain Config (see page 51 ) or by resetting the product to factory default. Select the power line frequency (50 Hz or 60 Hz) used at the lo...

AXIS M3007–P Accessing the Product Manual Trigger The Manual Trigger is used to trigger an action rule from the Live View page. The manual trigger can for example be used to validate actions during product installation and configuration. To configure the manual trigger: 1. Go to Setup > Events . ...

AXIS M3007–P Accessing the Product Click the Ctrl panel button to open the PTZ control panel which provides additional PTZ controls. User-defined buttons can also appear in the Control panel. See Controls, on page 28 . Click the Home button to go to the Home preset position. See Preset Positions, on...

AXIS M3007–P Media Streams Media Streams The Axis product provides several video stream formats. Your requirements and the properties of your network will determine thetype you use. The Live View page in the product provides access to H.264 and Motion JPEG video streams, and to the list of available...

AXIS M3007–P Media Streams The AMC Control Panel can be used to configure various video settings. Please see the AXIS Media Control User’s Manual for moreinformation. The AMC Control Panel is automatically installed on first use, after which it can be configured. Open the AMC Control Panel from: • W...

AXIS M3007–P Setting Up the Product Setting Up the Product The Axis product can be configured by users with administrator or operator rights. To open the product’s Setup pages, click Setup in the top right-hand corner of the Live View page. • Administrators have unrestricted access to all settings. ...

AXIS M3007–P Setting Up the Product Video It is possible to configure the following video features in your Axis product: • Video stream. See page 16 . • Stream profiles. See page 21 . • Camera settings. See page 21 . • View areas. See page 22 • Overlay image. See page 23 . • Privacy mask. See page 2...

AXIS M3007–P Setting Up the Product • The Live View page in Internet Explorer with AXIS Media Control (AMC) in Windows. Right-click in the image and select Pixel counter . Use the mouse to move and resize the rectangle. View modes A view mode is one of the possible views for this Axis product and ca...

AXIS M3007–P Setting Up the Product Double Panorama In this view there are two 180 degree panoramic views. To define the settings for this view go to Setup > Video > Video Stream > Double Pan... . See Video Stream, on page 16 . This view is not available during wall installation. This view ...

AXIS M3007–P Setting Up the Product Image The default image settings can be configured under Video> Video Stream . Select the Image tab. The following settings are available: • Resolution . Select the default resolution. • Compression . The compression level affects the image quality, bandwidth a...

AXIS M3007–P Setting Up the Product size optimizes bandwidth and storage usage, but may give poor image quality. To prevent increased bandwidth and storage usage,the maximum frame size should be set to an optimal value. Stream Profiles A stream profile is a set of predefined stream settings includin...

AXIS M3007–P Setting Up the Product Exposure Settings Configure the exposure settings to suit the image quality requirements in relation to lighting, frame rate and bandwidthconsiderations. Exposure value - Click in the bar to fine-tune the exposure. Exposure control - These settings is used to adap...

AXIS M3007–P Setting Up the Product To define the video stream settings for each view area click on the respective view area from Setup > Video > Video Stream . See page 16 . You can select a view area that you have set up from the Source drop-down list in the Live View page. Use the Pan , Til...

AXIS M3007–P Setting Up the Product For information about supported image formats, see the online help . Using Overlay Text in an Action Rule Action rules, see page 34 , can display an overlay text when the rule is triggered. The text can be used to provide information for forensic video analysis, n...

AXIS M3007–P Live View Config Live View Config You can customize the Live View page and alter it to suit your requirements. It is possible to define the following features ofthe Live View page. • Stream Profile. See page 21 . • Default Viewer for Browser. See page 25 . • Viewer Settings. See page 26...

AXIS M3007–P Live View Config Browser Viewer Description AMC Recommended viewer in Internet Explorer (H.264/Motion JPEG). QuickTime H.264. Java applet A slower imaging alternative to AMC (Motion JPEG). Requires one of thefollowing installed on the client: • JVM (J2SE) 1.4.2 or higher.• JRE (J2SE) 5....

AXIS M3007–P PTZ (Pan Tilt Zoom) PTZ (Pan Tilt Zoom) PTZ controls are only available for view areas. Preset Positions A preset position is a predefined view that can be used to quickly steer the camera to a specific location. Preset positions canbe accessed in several ways: • By selecting the preset...

AXIS M3007–P PTZ (Pan Tilt Zoom) Guard Tour A guard tour displays the video stream from different preset positions, one-by-one, in a predetermined order or at random and forconfigurable time periods. The enabled guard tour will keep running after the user has logged off or closed the browser. To add...

AXIS M3007–P Detectors Detectors Camera Tampering Camera Tampering can generate an alarm whenever the camera is repositioned, or when the lens is covered, sprayed or severelydefocused. To send an alarm, for example an email, an action rule must be set up. To configure tampering: 1. Go to Detectors &...

AXIS M3007–P Detectors Note • Using the motion detection feature may decrease the product’s overall performance. • The position of the Motion Detection Window is relative to the orientation of the Camera. Changing the orientation of the camera will also change the position of the Motion Detection Wi...

AXIS M3007–P Detectors Medium level (50%) A large difference in luminanceis required to trigger motiondetection. Low level (0%) Even very small objects triggermotion detection. An object that appears inthe window triggers motiondetection only for a very shorttime before it is considered asnon-moving...

AXIS M3007–P Applications Applications Third party applications can be uploaded to and installed on the Axis product. Applications add functionality to the product, forexample video analytics and intelligent video capabilities such as recognition, tracking, detection and counting. For informationabo...

AXIS M3007–P Applications If the Axis product is reset to factory default, installed applications and their settings are removed. For information about factorydefault, see Reset to Factory Default Settings . 33

AXIS M3007–P Events • Send Images – Send images to a recipient. • Send Notifications – Send a notification message to a recipient. • Status LED – Flash the LED indicator. This can for example be used to validate triggers such as motion detection during product installation and configuration. Setting...

AXIS M3007–P Events Recipient Use with action Email 1 Send Images Send Notification FTP Send Images HTTP Send Images Send Notification Network Share 2 Send Images TCP Send Notification 1. Some email providers have security filters that prevent users from receiving or viewing large amount of attachme...

AXIS M3007–P Recordings Recordings The Axis product can be configured to record video continuously or according to an action rule: • To start a continuous recording, see page 38 . • To set up action rules, see page 35 . • To access recordings, see Recording List, on page 38 . • To configure camera c...

AXIS M3007–P Recordings 5. Click Save to save and start the recording. 39

AXIS M3007–P Languages Languages Multiple languages can be installed in the Axis product. All web pages including the online help will be displayed in the selectedlanguage. To switch languages, go to Setup > Languages and first upload the new language file. Browse and locate the file and click th...

AXIS M3007–P System Options System Options Security Users User access control is enabled by default and can be configured under System Options > Security > Users . An administrator can set up other users by giving them user names and passwords. It is also possible to allow anonymous viewer log...

AXIS M3007–P System Options 3. Optionally, click Ciphers and select the encryption algorithms to use for SSL. 4. Set the HTTPS Connection Policy for the different user groups. 5. Click Save to enable the settings. To access the Axis product via the desired protocol, enter https:// or http:// in the ...

AXIS M3007–P System Options The Date & Time Format Used in Images is the date and time format displayed as a text overlay in the video stream. Use the predefined formats or see File Naming & Date/Time Formats in the online help for information on how to create custom date and time formats. T...

AXIS M3007–P System Options arp -s 192.168.0.125 00:40:8c:18:10:00 tempping -s 408 192.168.0.125 Windows syntax (this may require that you run the command prompt as an administrator) arp -s <IP address> <serial number>ping -l 408 -t <IP address> Windows example (this may require th...

AXIS M3007–P System Options Select Obtain DNS server address via DHCP to use the DNS settings provided by the DHCP server. To make manual settings, select Use the following DNS server address and specify the following: Domain name - Enter the domain(s) to search for the host name used by the Axis pr...

AXIS M3007–P System Options Use NAT traversal when the Axis product is located on an intranet (LAN) and you wish to make it available from the other (WAN) side of a NAT router. With NAT traversal properly configured, all HTTP traffic to an external HTTP port in the NAT routeris forwarded to the prod...

AXIS M3007–P System Options SNMP The Simple Network Management Protocol (SNMP) allows remote management of network devices. An SNMP community is thegroup of devices and management station running SNMP. Community names are used to identify groups. The Axis product can be configured to support SNMP on...

AXIS M3007–P System Options Storage SD Card The Axis product supports SD cards with up to 64 GB of storage. For best recording performance, use an SDHC or SDXC cardwith speed class 10. NOTICE NOTICE NOTICE To prevent corruption of recordings, the SD card should always be unmounted before it is eject...

AXIS M3007–P System Options 4. Enter the name of the share in the Share field. Sub folders cannot be used. 5. If required, select The share requires login and enter the user name and password. 6. Click Connect . To clear all recordings and data from the Axis product’s folder on the designated share,...

AXIS M3007–P System Options Logs & Reports The System Options > Support > Logs & Reports page generates logs and reports useful for system analysis and troubleshooting. If contacting Axis Support, please provide a valid Server Report with your query. System Log - Provides information a...

AXIS M3007–P Troubleshooting Troubleshooting Checking the Firmware Firmware is software that determines the functionality of network devices. One of your first actions when troubleshooting a problemshould be to check the current firmware version. The latest version may contain a correction that fixe...

AXIS M3007–P Troubleshooting Symptoms, Possible Causes and Remedial Actions Problems setting the IP address When using ARP/Ping Try the installation again. The IP address must be set within two minutes after power has beenapplied to the product. Ensure the Ping length is set to 408. For instructions...

AXIS M3007–P Troubleshooting No H.264 displayed in theclient Check that the relevant H.264 connection methods and correct interface are enabled in the AMCControl Panel (streaming tab). See AXIS Media Control (AMC), on page 12 . In the AMC Control Panel, select the H.264 tab and click Set to default ...

AXIS M3007–P Technical Specifications Function/group Item Specifications Video access fromweb browser Camera live viewVideo recording to file (ASF)Customizable HTML pagesWindows Vista, XP, Windows 7, Server 2003 and Server 2008DirectX 9c or higherFor other operating systems and browers see www.axis....