ATTO 3400 - Manuals

3 ATTO FibreCenter 3400 Ins tallation and Operation Manual 2 ATTO FibreCenter supports diverse SAN needs The ATTO FibreCenter 3400 provides a 2-gigabit Fibre Channel rackmount hub configured with eight Fibre Channel ports and an Ethernet management port. The ATTO FibreCenter 3400 integrates industry...

5 ATTO FibreCenter 3400 Ins tallation and Operation Manual 3 ATTO FibreCenter 3400 characteristics ATTO FibreCenter 3400 is a 2-Gigabit Fibre Channel hub configured with eight (8) Fibre Channel ports and an Ethernet management port. The FibreCenter 3400 is designed to integrate industry leading perf...

7 ATTO FibreCenter 3400 Ins tallation and Operation Manual 4 Setting up the FC Rack System The ATTO FC Rack System is a configurable 19-inch rack system with two bays designed to house the ATTO FibreCenter 3400. The 1U rackmount enclosure provides the flexibility to integrate theATTO FibreCenter in ...

Secure Data Path Applicationv 8 Output voltage: +12 Volts @ 5 Amps (60 watts) continuous, 5.8 amps (70 watts) peak. Power draw: The maximum power draw is 2 Amps @ 110 Volts for the entire ATTO FC Rack System. When the ATTO FC Rack System has two power modules, the entire unit will draw 2 Amps @ 110 ...

9 ATTO FibreCenter 3400 Ins tallation and Operation Manual 5 Setting up the ATTO FibreCenter The ATTO FibreCenter 3400 fits into a standard rack mount module enclosure. While configuration changes can be made “on the fly,” data transmission will be interrupted. To make changes without impacting data...

Secure Data Path Applicationv 10 Connecting Fibre Channel ports The Fibre Channel ports connect into an Arbitrated Loop. When devices connected to the FibreCenter 3400 are powered up, each NL_Port must sign in with the other ports on the loop. Each port first attempts to find an FL_Port within the l...

11 ATTO FibreCenter 3400 Ins tallation and Operation Manual 6 Configuring the ATTO FibreCenter The ATTO FibreCenter 3400 may be configured as one 8-port hub (Zone 1) or two 4-port hubs (Zone 2 and Zone 3). Each Fibre Channel bus in the two-zone configuration can run at different speeds (1Gb or 2Gb)....

13 ATTO FibreCenter 3400 Ins tallation and Operation Manual Port 1 Port 2 Port 3 Port 4 Port 5 Port 6 Port 7 Port 8 B E G F D C A Zone 1 Port 1 Port 2 Port 3 Port 4 Port 5 Port 6 Port 7 Port 8 B C A Zone 2 Zone 3 B C A 7 Command Line Interface use and guidance You will be able to perform all configu...

Secure Data Path Applicationv 14 Exhibit 7-3 Command conventions. Do not type symbols when entering commands. Symbol Indicates [ ] Required entry • Space character (ASCII 32 decimal) < > Optional entry | pick one of … Ellipses, repetition of preceding item \n end of line – a range (6 – 9 = 6, ...

15 ATTO FibreCenter 3400 Ins tallation and Operation Manual 7.1 Ethernet and Telnet configuration commands Configure the ATTO FibreCenter 3400 using a Telnet session over the Ethernet port. The commands in this section configure or provide information about the Ethernet port and the Telnet session. ...

Secure Data Path Applicationv 16 7.2 Diagnostic commands The commands in this section only provide information about the ATTO FibreCenter 3400. Access this information using these command line interface commands in a Telnet session over the Ethernet port. Status Displays the status of the power supp...

17 ATTO FibreCenter 3400 Ins tallation and Operation Manual Port 1 Port 2 Port 3 Port 4 Port 5 Port 6 Port 7 Port 8 B E G F D C A Zone 1 Port 1 Port 2 Port 3 Port 4 Port 5 Port 6 Port 7 Port 8 B C A Zone 2 Zone 3 B C A 7.3 Configuration commands Configure the ATTO FibreCenter 3400 using a Telnet ses...

19 ATTO FibreCenter 3400 Ins tallation and Operation Manual 8 Updating firmware The Linux Kernel and the Flash File System may be updated by accessing the FibreCenter 3400 through an Ethernet network. Linux Kernel Update 1 Attach the FibreCenter 3400 to an Ethernet network. 2 Configure the FibreCent...

Secure Data Path Applicationv 20 9 Troubleshooting The fault LED indicates that a signal is being received, but the signal contains enough faults to make the port fail and go into bypass mode. Port LEDs on the ATTO FibreCenter are generally lighted if the port is enabled through the Setup CLI comman...

i ATTO FibreCenter 3400 Ins tallation and Operation Manual Index: Command Line Interface A summary of the Command Line Interface commands, their defaults, an example of how they might be used, and where you can find the specifics of the command. Commands which have no default values associated with ...

Secure Data Path Applicationv iii Appendix A Standards and compliances The ATTO Technology FibreCenter 3400 described in this manual generates and uses radio frequency energy. If this equipment is not used in strict accordance with the manufacturer's instruction, it can and may cause interference wi...

iv ATTO FibreCenter 3400 Ins tallation and Operation Manual Appendix B Contact ATTO Technology, Inc. Customer service, sales information and technical support are available by phone Monday through Friday,Eastern Standard Time 8:00 a.m. to 8:00 p.m., or by fax and web site 24-hours a day. ATTO Techno...