ATTO FC2600 - Manual - manualsarea.com

Page 3 - Contents

Contents 1 ATTO ExpressPCI provides Fibre Channel solutions 1 Advanced SCSI supportPCI featuresEnvironmental, physical specifications 2 Fibre Channel is a key technology for storage ........ 3 Glossary 3 Hardware installation and initial configuration ........ 5 System requirementsFibre Channel addr...

Page 4 - ATTO ExpressPCI provides Fibre Channel solutions; Advanced SCSI support; Accelerated PCI bus management

1 ATTO Technology ExpressPCI FC 3321 Installation and Operation Manual 1 ATTO ExpressPCI provides Fibre Channel solutions All ATTO ExpressPCI models have been designed to ensure interoperability with Fibre Channel devices and compatibility with a broad range of servers and workstations to meet your ...

Page 5 - Linux

2 Features and b e nefits 2-Gigabit Adapters FC 3342 FC 3322 FC 3321 FC 3300 FC 3305 Fibre Channel ports 4 2 2 1 1 Optical interface SW, LC, SFP SW, LC, SFP SW, LC, SFF Fixed SW LC Copper interface HSSDC Max. transfer rate 400 MB/sec per channel 400 MB/sec per channel 400 MB/sec per channel 400 MB/s...

Page 6 - Fibre Channel is a key technology for storage; , the Fibre Channel Industry Association

3 ATTO Technology ExpressPCI FCSW and FC 2600 Installation and Operation Manual 2 Fibre Channel is a key technology for storage Fibre Channel is a serial communications technology designed to transfer large amounts of data among a variety of hardware systems over long distances. It is a key technolo...

Page 8 - Hardware installation and initial configuration; System requirements; A computer with an available 32- or 64-bit; Fibre Channel address; Cabling

5 ATTO Technology ExpressPCI FCSW and FC 2600 Installation and Operation Manual 3 Hardware installation and initial configuration You will need a basic understanding of Fibre Channel before installing the ATTO ExpressPCI host adapter. Please refer to Chapter 2 for a list of Fibre Channel-related web...

Page 9 - Initial configuration; TTO ExpressPCI Utilities Installation and

6 Install a t ion and configuration Exhibit 3-1 Required connectors and recommended cables Initial configuration ATTO ExpressPCI host adapters come preconfigured to operate properly in a variety of common system setups. However, some systems or setups may benefit by tuning the adapter for optimal pe...

Page 10 - Installing/updating device drivers and firmware; Use the ATTO ExpressPCI; Windows 2000/XP driver installation; New installation; Pre-existing installation; New installation; Pre-existing installation

7 ATTO Technology ExpressPCI FCSW and FC 2600 Installation and Operation Manual 4 Installing/updating device drivers and firmware ExpressPCI FC host adapters require device drivers and firmware for proper operation. Your adapter firmware was properly flashed before shipment, but the firmware may nee...

Page 11 - Updating the Windows NT driver; Mac OS X driver installation/update; New or previous installation; Linux and Sun Solaris driver installation

8 Device drivers Updating the Windows NT driver 1 Click on the Start menu and select Run . 2 Type in RDISK.EXE and press ENTER to create an emergency repair disk. 3 Double-click My Computer and open the Control Panel . 4 Double-click the SCSI Adapter icon. 5 Click on the Driver tab and highlight the...

Page 12 - Troubleshooting; General suggestions

9 ATTO Technology ExpressPCI FCSW and FC 2600 Installation and Operation Manual 5 Troubleshooting This chapter contains solutions for the most common problems you might encounter. If you need additional assistance, please refer to the ATTO Technology web site (www.attotech.com) or contact an ATTO Te...

Page 13 - If the card has been recently re-flashed with; Macintosh; Power up Fibre Channel drives before

10 T r oublesh ooting 4 If it has been identified, click on the Drivers Tab to see if the ATTO ExpressPCI host adapter driver has been started. It will say Started in the right hand column of the window. If the ATTO ExpressPCI host adapter driver appears but is not started, check on the device statu...

Page 14 - Appendix A Standards and compliances; FCC Standards: Radio and Television Interference; Canadian Standards; This Class B digital apparatus complies with Canadian ICES-003.; European Standards; Declaration of Conformity; Usage Restrictions

i ATTO Technology ExpressPCI FCSW and FC 2600 Installation and Operation Manual Appendix A Standards and compliances The equipment described in this manual generates and uses radio frequency energy. The Technical Specification sheet for a particular ATTO ExpressPCI host bus adapter list certificatio...

Page 15 - Appendix B Fibre Channel accessories

ii Appendix B Fibre Channel accessories The following Fibre Channel accessories are available through ATTO Technology and authorized resellers. Contact an ATTO Technology authorized sales representative to order. Copper Cables CBL-HSDB-03X HSSDC to DB9 Copper Fibre Channel Cable – 3m. CBL-HSDB-10X H...

Page 16 - Appendix C SCSI host adapter selection guide; Specific features

iii Appendix C SCSI host adapter selection guide ATTO Technology offers a number of SCSI and Fibre Channel solutions for storage. The following chart compares the features of ExpressPCI SCSI host adapters. Supported platforms: Sun Solaris; Linux; NetWare; SCO Unix; Windows 2000, 95/98, NT, and Macin...

Page 17 - Appendix D Contact ATTO Technology, Inc.

iv Appendix D Contact ATTO Technology, Inc. Customer service, sales information and technical support are available by phone Monday through Friday, Eastern Standard Time 8:00 a.m. to 8:00 p.m., or by e-mail and web site 24-hours a day. ATTO Technology, Inc.155 CrossPoint ParkwayAmherst, New York 140...

ATTO FC2600 - Manual

Table of Contents:

Summary

Other ATTO Models