Page 4 - AtlantisLand I-Storm Lan Router ADSL; ii; INDEX; CONFIGURING ADSL ROUTER
AtlantisLand I-Storm Lan Router ADSL ii INDEX 1.1 I NTRODUCTION TO E THERNET R OUTER ........................................................................... 4 1. 2 P RODUCT F EATURES ............................................................................................................. 4 1...
Page 5 - Capitolo 1 Introduzione; iii
Capitolo 1 Introduzione iii APPENDIX: ISP ......................................................................................................................... 33 Scenario 1: Bridge Mode Configuration (with PPPoE Client) ................................................. 33 Scenario 2: Router Mod...
Page 6 - Manual; Introduction to Ethernet Router; Compliant with ADSL standards
4 I-Storm Lan Router Manual 1.1 Introduction to Ethernet Router The I-Storm Lan Router ADSL is optimized to address the growing demand for high-speed Internet access. With both a USB 1.1-complient interface and an IEEE 802.3-complient Ethernet interface, it provides the widest array of connectivity ...
Page 8 - Package Contents and Hardware Indicators
AtlantisLand I-Storm Lan Router ADSL 6 • Simultaneous operation with Ethernet Interface • Host driver for Win98se,2K,Me,XP HTTP Web-Based Management • Local Firmware upgrade via FTP or Web • Remote Firmware upgrade via FTP client • Customizable Web pages • WAN and LAN side connection statistics • Co...
Page 9 - LED Indicators; LED; POWER; Rear Panel
7 LED Indicators The LED Indicators read as follows: LED INFORMATION 1 POWER Steady red light indicates the router is powered on. 2 READY System status indicators when blinking indicate system is alive. 3 ADSL Steady green light indicates a valid ADSL connection. This will light after the ADSL negot...
Page 10 - POWER; Connect the supplied power adapter to this jack; Hardware Installation; and choose
AtlantisLand I-Storm Lan Router ADSL 8 PORT MEANING 1 POWER (jack) Connect the supplied power adapter to this jack 2 USB Connect the USB cable to this port when Upgrading Firmware or connecting to PC 3 4 *LAN (RJ-45) Connect a straight or crossover Ethernet cable to this port when connecting to PCs ...
Page 11 - A. Get IP from Router
9 4. Now, you have two setting methods: A. Get IP from Router
Page 12 - Windows XP
AtlantisLand I-Storm Lan Router ADSL 10 B. Configure IP manually. Select Specify an IP address on the IP address tab . The default IP address of Router is 192.168.1.254. So please use 192.168.1.x (X is between 1 and 253) for IP address field and 255.255.255.0 for Subnet Mask field. In the Gateway ta...
Page 13 - Use the following IP address; Subnet Mask; Use the following DNS server addresses.; ping; Request timed out.
11 B. Configure IP Address manually. Select Use the following IP address . The default IP address of Router is 192.168.1.254. So please use 192.168.1.X (X is between 1 and 253,) for IP address field and 255.255.255.0 for Subnet Mask field. In the Default Gateway field, add the IP address of the Rout...
Page 15 - WAN
13 1.10 ROUTER CONFIGURATION WAN The WAN configuration page allows user to set the configuration for the WAN/ADSL ports. 1. Per VC Settings: Under Per VC Setting, it provides the configurations for IP address, Subnet Mask, Gateway and VPI/VCI. Current firmware supports eight PVCs.To switch between t...
Page 18 - Following settings are necessary when working under this mode:
AtlantisLand I-Storm Lan Router ADSL 16 2. Encapsulation: 1483 Bridged IP LLC 3. Bridged: Disabled 4. NAT Configuration: Dynamic NAPT Please see scenario 2: Router Mode Configuration with Dynamic IP in Appendix for more detail configuration. 8.2 Static IP for WAN IP (RFC 1483 ROUTED) Following setti...
Page 19 - LAN Configuration; DHCP Server; System Allocated
17 3. Bridged: Disabled 4. PPP User Name: Provided by ISP 5. PPP password: Provided by ISP 6. NAT Configuration: Dynamic NAPT Please see scenario 5: Router Mode Configuration PPPoE in Appendix for more detail configuration. 8.5 Classical IP over ATM ( RFC 1577) Following settings are necessary when ...
Page 20 - PPP Configuration; will be displayed at the bottom of this page to show all
AtlantisLand I-Storm Lan Router ADSL 18 • Use the Default IP Address. The Router comes with a preset default IP address setting of 192.168.1.254 for the LAN port. There are two ways to use this default IP address, you can manually assigned an IP address and subnet mask for each PC on the LAN or you ...
Page 21 - Automatic Reconnect:; When; AUTO; option is chosen, the PAP mode will run first then CHAP.; PPP Configuration Status; will be displayed at the bottom of this page to show all the Session; NAT Configuration; Session Name
19 the LAN client and the WAN host will indicate their MSS during the TCP connection handshake. The default value is 1432. • Automatic Reconnect: When it is checked, it will maintain the PPP connection all the time. If the ISP shut down the PPP connection, it will automatically reconnect PPP session...
Page 22 - Interface
AtlantisLand I-Storm Lan Router ADSL 20 Interface : This field allows the user to choose specific WAN Interface (PVC or PPP Session) for NAT Session. NAT Session Name Status will be displayed at the bottom of this page to show all the Session Names with its WAN Interface. Click the link Go back to N...
Page 23 - Virtual Server
21 Interface: This field allows the user to choose specific WAN Interface (PVC or PPP Session) for NAT Session. NAT Session Name Status will be displayed at the bottom of this page to show all the Session Names with its WAN Interface. Click the link Go back to NAT Configuration to the NAT configurat...
Page 24 - cases, the private port number is same as public port number.; Host IP Address; Bridge filtering
AtlantisLand I-Storm Lan Router ADSL 22 Public Port : This field allows the user to enter the port number of the Public Network. Private Port : This field allows the user to enter the port number of the Private Network. In most cases, the private port number is same as public port number. Host IP Ad...
Page 25 - DNS Configuration; Use Auto Discovered DNS Servers Only
23 DNS Configuration Domain Name Service (DNS) is a service used on the Internet for resolving fully qualified domain names (FQDN) to their Internal Protocol (IP) address. You can type the preferred DNS server IP address, Alternative DNS server IP address that provided by ISP or automatically assign...
Page 26 - Save Settings
AtlantisLand I-Storm Lan Router ADSL 24 Save Settings The Save Settings page allows users to save the new configuration to the flash and reboot the system. When you change all setting, you must click save settings and click submit. The Router will save settings and software reset router for about 20...
Page 27 - The TCP Status page shows the statistics for all TCP connections.; Route Table; New Enhancement for Routing Table
25 1.11 ROUTER ADMIN PRIVILEGE: The links under Admin Privilege are only to be accessed and configured, when it is login with administrator login name and password. WAN Status The WAN Status page shows the information and status of WAN PVCs. The DHCP Release and Renew allows the users to release and...
Page 28 - System Default Gateway Configuration; Learned MAC Table; The; Learned MAC; Table page shows the current learned Bridge MAC table.
AtlantisLand I-Storm Lan Router ADSL 26 All user-defined routes retained in the CPE memory, regardless if they are already in the Routing Table, are displayed on the same Route Table page. All user defined route entries kept in the CPE memory during run time are saved to flash when the user chooses ...
Page 29 - Aging Timeout; ADSL Configuration; Trellis; RIP Configuration
27 Aging Timeout : This field allows the user to enter the update period for the MAC table. ADSL Configuration The ADSL Configuration page allows users to set the configuration for ADSL protocols. Trellis : This field allows the user to enable or disable the Trellis Code. By default, it is always en...
Page 30 - Password Configuration; Admin
AtlantisLand I-Storm Lan Router ADSL 28 Garbage Timeout: This field allows the user to enter the Garbage timer in second. This timer specifies how long the expired and invalidated routes are kept in the Internal RIP Route Table before it is removed from it. (Default = 300 seconds) RIP Per Interface ...
Page 31 - Miscellaneous Configuration; HTTP Server Access; : This field allows the user to enable or disable the FTP connection.; TFTP server; DMZ Host IP: The IP address of the DMZ host at LAN side.; DHCP Relay
29 The User Password Configuration page allows the user to set the password for the user. Miscellaneous Configuration The Miscellaneous Configuration allows users to set all the miscellaneous configurations. HTTP Server Access : This field allows the user to configure the Web pages can be accessed f...
Page 32 - For the; PPP connect on WAN access; , the PPP will be automatically reconnected when an; Automatic; it will reconnect the PPP session whenever it is terminated by ISP.; PPP Half Bridge; : When the PPP Half Bridge is enabled, only one PC is able to access the; Reset to Factory Default
AtlantisLand I-Storm Lan Router ADSL 30 For the PPP connect on WAN access , the PPP will be automatically reconnected when an URL is entered in the browser (packet interested in going out the WAN). For the Automatic Reconnect, it will reconnect the PPP session whenever it is terminated by ISP. PPP H...
Page 33 - The System Log page shows the events triggered by the system.
31 Network Code Image Update The Network Code Image Update page allows users to upgrade the image code from the remote FTP server. System Log The System Log page shows the events triggered by the system.
Page 34 - SUPPORT; their respective holders.
AtlantisLand I-Storm Lan Router ADSL 32 SUPPORT If you have any problems with the ADSL Router, please consult this manual. If you continue to have problems you should contact the dealer where you bought this ADSL Router. If you have any other questions you can contact the Atlantis Land company direc...
Page 35 - ADSL Ethernet Router Configuration
33 APPENDIX: ISP ADSL Ethernet Router Configuration Scenario 1: Bridge Mode Configuration (with PPPoE Client) WAN Configuration Default Gateway 0.0.0.0 VC Setting Enabled VPI Provided By ISP VCI Provided By ISP Static IP Address 0.0.0.0 Subnet Mask 0.0.0.0 Encapsulation 1483 Bridged IP LLC Bridged E...
Page 37 - Scenario 2: Router Mode Configuration with Dynamic IP
35 Scenario 2: Router Mode Configuration with Dynamic IP WAN Configuration Default Gateway 0.0.0.0 VC Setting Enabled VPI Provided By ISP VCI Provided By ISP Static IP Address 0.0.0.0 Subnet Mask 0.0.0.0 Encapsulation 1483 Bridged IP LLC Bridged Disabled IGMP Disabled PPP Service Name N/A PPP User N...
Page 39 - Scenario 3: Router Mode Configuration with Static IP
37 Scenario 3: Router Mode Configuration with Static IP WAN Configuration Default Gateway Provided by ISP VC Setting Enabled VPI Provided By ISP VCI Provided By ISP Static IP Address Provided by ISP Subnet Mask Provided by ISP Encapsulation 1483 Bridged IP LLC Bridged Disabled IGMP Disabled PPP Serv...