Page 2 - Before you use this Product
2 Before you use this Product This Atlantis Land product has been designed with safety in mind. However, if not used properly electrical products can cause fires which may lead to serious body injury. To avoid such accidents, be sure to heed the following. Legal Caution Video and audio surveillance ...
Page 4 - Item; IP Camera; Overview; Front
1 Installation Installation Steps Follow these steps to install the NetCamera on your Ethernet: 1. Check the package contents against the list below. 2. Set the device. See IP Installer User Manual on the available methods. Package Contents Item Description IP Camera Atlantis Land IP Camera Power Ad...
Page 5 - Using IP Camera via Mobile Phone; For 3G mobile phone viewing, type “; G Mobile Phone viewing; the IP address of your IP camera.
2 Using IP Camera via Mobile Phone To use IP cameras via mobile phones, please make sure your RTSP is set to “ON”. (Default is “ON”) To change the settings of IP cameras, please see “Settings” for details. 3G Mobile Phone viewing For 3G mobile phone viewing, type “ rtsp://<IP>:<PORT>/vid...
Page 6 - Using IP Camera via Web Browser; System Requirement
3 Using IP Camera via Web Browser System Requirement To use the product normally, we strongly recommend your computer follows our minimum system requirement (Computer level lower than this might cause some problems) Item Requirements CPU Pentium 4 1600MHz (or equivalent AMD) Graphic Card 64MB RAM gr...
Page 7 - How to Use; setting the device, see “Setting the Camera” .
4 How to Use This chapter introduces how to monitor the image from the device using Microsoft web browser. The Atlantis Land IP camera can be used with Microsoft web browsers and Intelligent IP Installer in Windows operation systems. This document focuses on introducing you to Microsoft web browser....
Page 8 - Initial accessing the IP camera; Note
5 1. Initial accessing the IP camera 1. Start your web browser, and enter the IP address or host name of the ATLANTIS LAND IP camera in the Location / Address field of your browser. Note : • If you only want to view the video without setting page, enter “ http://<IP>/index2.htm ” as your web U...
Page 9 - Configuration of Main Menu; Language; and; Advance
6 2. Configuration of Main Menu Language You can click the pulldown box to select system language, including English, Traditional Chinese, Simplified Chinese, German, Japanese and Spanish. 2.1 Setting This function is only for the Administrator. Click this button to get into the Basic and Advance se...
Page 10 - MJPEG streaming is unavailable if RTSP mode is ON.; Save; ” to save the picture in your computer.; Close; ” to return to the view page.; Zoom in / out the image via the monitor window
7 2.2 Client Setting Mode: Click the pulldown box to choose between MPEG4 and MJPEG video compression mode. Note : MJPEG streaming is unavailable if RTSP mode is ON. View Size: Select the desired display image resolution to 640X480 or 320X240. Protocol: Select the transferring protocol from TCP, UDP...
Page 12 - Setting; Click the “Basic” folder to display the sub folders, including; System; Security
9 Setting 3. Basic Click the “Basic” folder to display the sub folders, including System , Camera , Network , and Security . 3.1 System 3.1.1 Information The Information page provides you with product factory information, including Product name, Firmware version, and Web version.
Page 22 - The quality will be automatically decided.; Fixed quality
19 Quality Auto : The quality will be automatically decided. Fixed quality : The selectable values are Medium, Standard, Good, Detailed and Excellent.
Page 23 - Information
20 3.3 Network 3.3.1 Information MAC address : Display the MAC address of the device. Obtain an IP address automatically (DHCP) : If a DHCP server is installed on the network, to select this while the IP address is assigned by the DHCP server. Note : • When you set Obtain an IP address automatically...
Page 26 - Server name; Choose the DDNS Server from the list.; User ID; up to 32 characters.; Host name; Enter the host name that is registered to the DDNS server.
23 3.3.3 DDNS Server name : Choose the DDNS Server from the list. User ID : Enter the user ID for authentication necessary for DDNS connections. Type it up to 64 characters. Password : Enter the password for authentication necessary for DDNS connections. Type it up to 32 characters. Re-type password...
Page 27 - HTTP port
24 3.3.4 UPnP The device includes support for UPnP, which is enabled by default. If also enabled on your computer, the device will automatically be detected and a new icon will be added to “My Network Places.” It provides port forwarding for opening a port in a router or firewall in a private networ...
Page 29 - Type the user name and Password of the user who has the mail; Recipient e-mail address; Type the recipient e-Mail address up to 64 characters. You can; Administrator e-mail address; Type the Administrator e-Mail address up to 64 characters.; Subject; sent according to the IP notification.; Message
26 User name, Password : Type the user name and Password of the user who has the mail account. This setting is necessary when the SMTP server which sends e-mails performs authentication. Recipient e-mail address : Type the recipient e-Mail address up to 64 characters. You can specify up to three rec...
Page 31 - HTTPS; Create a self-signed certificate for HTTPS to recognize.; Installed Certificate:; Display or remove the properties of the installed certificate.; HTTPS Connection Policy:; Set HTTPS connection policy for different level of users.
28 3.4.2 HTTPS HTTPS is a URI scheme used to indicate a secure HTTP connection. It is syntactically identical to the http:// scheme normally used for accessing resources using HTTP. Using an https: URL indicates that HTTP is to be used, but with a different default TCP port (443) and an additional e...
Page 33 - to FTP server. Select; On; to connect to FTP server using the passive mode.; Attached file type; Set attached file type to MJPEG or MPEG.4
30 Retype password : To confirm the password, type the same characters as you typed in the Password box. Passive mode : Set whether you use the passive mode of FTP server or not when connecting to FTP server. Select On to connect to FTP server using the passive mode. Attached file type : Set attache...
Page 35 - Effective period; Set the period when the periodical sending is effective.; Always; The periodical sending is always effective.; schedule setting in the other section. Click; Schedule; and the setting menu for the effective
32 Effective period : Set the period when the periodical sending is effective. Always : The periodical sending is always effective. Schedule : You can specify the period when the periodical sending is effective in the schedule setting in the other section. Click Schedule and the setting menu for the...
Page 41 - the motion detection function page.; works only when the Video mode is set to; Cropping; is set to; Off
38 the motion detection function page. Note : • Motion Detection works only when the Video mode is set to MPEG4 and the Cropping is set to Off .
Page 42 - Periodical sending
39 4.2.3 Periodical sending You can set to send an image file by SMTP server periodically by selecting On to send the image file by SMTP server linked with setting period. Image file name : Type the file name of the image sent by SMTP up to 10 alphanumeric characters, - (hyphen) and _ (under score)....
Page 43 - HTTP server. HTTP client setting menu is composed of two tabs,; General; Alarm
40 4.3 HTTP Event Use this menu to set up for capturing and sending images to an HTTP server. By using HTTP client function, you can send the image and audio file which has been shot and recorded linked with the external sensor input or with the built-in motion detection function to HTTP server. HTT...
Page 46 - Motion Detection
43 4.5 Motion Detection When you click Motion Detection on the Advance mode menu, the Motion Detection setting menu appears. There are three Motion Detection functions as sensors to set for different detecting zones. Each one has Threshold and Sensitivity inputs which you can adjust to specific zone...