Atlantis Land A02-F16(24)/M2 - Manuals

Page 2 - CE Mark Warning

The Atlantis Land logo is a registered trademark of Atlantis Land SpA. All other names mentioned mat be trademarks or registered trademarks of their respective owners. Subject to change without notice. No liability for technical errors and/or omissions. FCC Warning This equipment has been tested and...

Page 4 - Purpose; Switch; Overview of this User’s Guide; Introduction

1 A B O U T T H I S G U I D E Congratulations on your purchase of the 16(24)-port 10/100Mbps Auto-negotiation Fast Ethernet Switch. This device integrates 100Mbps Fast Ethernet and 10Mbps Ethernet network capabilities in a highly flexible package. Purpose This guide discusses how to install your 16(...

Page 5 - N T R O D U C T I O N; Fast Ethernet Technology

2 I N T R O D U C T I O N This chapter describes the features of the Switch and some background information about Ethernet/Fast Ethernet switching technology. Fast Ethernet Technology The growing importance of LANs and the increasing complexity of desktop computing applications are fueling the need ...

Page 6 - Switching Technology; segments

3 Switching Technology Another approach to pushing beyond the limits of Ethernet technology is the development of switching technology. A switch bridge Ethernet packets at the MAC address level of the Ethernet protocol transmitting among connected Ethernet or Fast Ethernet LAN segments. Switching is...

Page 7 - solution to most kinds of local area network congestion problems.; Features

4 solution to most kinds of local area network congestion problems. Features The Switch were designed for easy installation and high performance in an environment where traffic on the network and the number of user increase continuously. The Switch with its rack size is specifically designed for mid...

Page 9 - Unpacking; Four rubber feet to be used for shock cushioning; Installation; Install the Switch in a fairly cool and dry place. See

6 U N PA C K I N G A N D I N S TA L L AT I O N This chapter provides unpacking and setup information for the Switch. Unpacking Open the shipping cartons of the Switch and carefully unpacks its contents. The carton should contain the following items: One the 16(24)-port 10/100Mbps Fast Ethernet Switc...

Page 10 - Rack Mounting

7 Install the Switch on a sturdy, level surface that can support its weight, or in an EIA standard-size equipment rack. For information on rack installation, see the next section, Rack Mounting. When installing the Switch on a level surface, attach the rubber feet to the bottom of each device. The r...

Page 12 - Front Panel; The figure below shows the front panels of the switch.; LED Indicator Panel

9 I D E N T I F Y I N G E X T E R N A L C O M P O N E N T S This section identifies all the major external components of the switch. Front Panel The figure below shows the front panels of the switch. Power 13 14 15 16 5 1 9 6 2 10 7 3 11 8 4 12 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 LINK 100Mbps 16 ...

Page 13 - Rear Panel; AC Power Connector

10 Link / Activity ( green ) This indicator light green when the port is connected to a Fast Ethernet or Ethernet station, if the indicator blinking green will be transmission or received data . 100Mbps ( green ) This LED indicator light green when the port is connected to a 100Mbps Fast Ethernet st...

Page 15 - General

12 T E C H N I C A L S P E C I F I C AT I O N General Standards IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet Protocol CSMA/CD Data Transfer Rate Ethernet: 10Mbps (half duplex), 20Mbps (full-duplex) Fast Ethernet: 100Mbps (half duplex), 200Mbps (full- duplex) Topology Star Networ...

Page 16 - Performance; K entries per device

13 Performance Transmits Method: Store-and-forward RAM Buffer: 512(2500)KBytes per device Filtering Address Table: 8K entries per device Packet Filtering/Forwarding Rate: 10Mbps Ethernet: 14,880/pps 100Mbps Fast Ethernet: 148,800/pps MAC Address Learning: Automatic update