Atlantis Land 8 ports 10/100/1000Mbps - Manuals

I N T R O D U C T I O N This section describes the features of the 8-port 10/100/1000Mbps Gigabit Ethernet Switch, as well as giving some background information about Gigabit Ethernet, Fast Ethernet and Switching technology. Gigabit Ethernet Technology Gigabit Ethernet is an extension of IEEE 802.3 ...

Gigabit Ethernet enables fast optical fiber connections to support video conferencing, complex imaging, and similar data-intensive applications. Likewise, since data transfers occur 10 times faster than Fast Ethernet, servers outfitted with Gigabit Ethernet NIC’s are able to perform 10 times the num...

disruptive and smooth evolution nature, and the dominating potential market base, virtually guarantee cost effective and high performance Fast Ethernet solutions in the years to come. 100Mbps Fast Ethernet is a new standard specified by the IEEE 802.3 LAN committee. It is an extension of the 10Mbps ...

The switch acts as a high-speed selective bridge between the individual segments. Traffic that needs to go from one segment to another is automatically forwarded by the switch, without interfering with any other segments. This allows the total network capacity to be multiplied, while still maintaini...

Performance features ♦ Auto MDI/MDI-X for each port ♦ Support Full/Half duplex transfer mode for 10 and 100Mbps ♦ Support Full duplex transfer mode for 1000Mbps ♦ Wire speed reception and transmission ♦ Store-and-Forward switching method ♦ Supports 4K absolute MAC addresses ♦ Supports 3.5MBit RAM fo...

♦ One 8-port 10/100/1000Mbps Gigabit Ethernet Switch ♦ Four rubber feet with adhesive backing ♦ One external power adapter ♦ This User’s Guide (CD-Rom) If any item is found missing or damaged, please contact your local reseller for replacement. Setup The setup of the Switch can be performed using th...

♦ Visually inspect the DC power jack and make sure that it is fully secured to the power adapter. Desktop or Shelf Installation When installing the Switch on a desktop or shelf, the rubber feet included with the device must be first attached. Attach these cushioning feet on the bottom at each corner...

ports runs both half duplex and full duplex while they’re running in 10Mbps or 100Mbps and runs full duplex while they’re running in 1000Mbps. These ports are Auto-MDI type port, these ports can auto transform to MDI-II or MDI-X type, so you can just make an easy connection that without worrying if ...

I D E N T I F Y I N G E X T E R N A L C O M P O N E N T S This chapter describes the front panel, rear panel and LED indicators of the Switch Front Panel The front panel of the Switch consists of 8 Gigabit Ethernet port, and LED indicators. Front panel view of the 8-port 10/100/1000Mbps Gigabit Ethe...

Rear Panel The rear panel of the Switch consists of an DC power connector. The following figure shows the rear panel of the Switch. Rear panel view of the 8-port 10/100/1000Mbps Gigabit Ethernet Switch ♦ DC Power Jack: Power is supplied through an external AC power adapter. Check the technical speci...

T E C H N I C A L S P E C I F I C AT I O N S General Standards: IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet ANSI/IEEE 802.3 Auto-negotiation IEEE 802.3x Full duplex Flow Control Protocol: CSMA/CD Data Transfer Rate: Ethernet: 10Mbps (hal...

Physical and Environmental DC inputs: 200 – 240 VAC, 50/60 Hz Power Consumption: 11 watts max (8 ports) Operating Temperature: 0 ~ 40 degrees Celsius Storage Temperature: -10 ~ 55 degree Celsius Humidity: 5% ~ 95% RH, non-condensing Dimensions: 190 mm x 120 mm x 38 mm EMI: FCC Class A, CE Mark Class...