Atlantis Land 3G 244WN - Manuals
Atlantis Land 3G 244WN – Manual in PDF format online.
Manuals:
Manual Atlantis Land 3G 244WN
Summary
2 INDEX 1. Introduction ....................................................................................................... 9 1.1 An Overview of WebShare 3G 244WN ............................................... 9 1.2 Package Contents .................................................................
4 Copyright Statement No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, whether electronic, mechanical, photocopying, recording or otherwise without the prior writing of the publisher. Windows™ 98SE/2000/ME/XP/VISTA are trademark...
5 Copyright Statement No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, whether electronic, mechanical, photocopying, recording or otherwise without the prior writing of the publisher. Windows™ 98SE/2000/ME/XP/VISTA are trademark...
6 CE Mark Warning In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. CE in which Countries where the product may be used freely: Germany, UK, Italy, Spain, Belgium, Netherlands, Portugal, Greece, Ireland, Denmark, L...
7 Outdoor 2400-2454 2454-2483,5 100mW(20dBm) 10mW(10dBm) Italy(IT): For more info, consult the website www.comunicazioni.it Luxembourg: General authorization requie for network and service supply. Norway (NO): This subsection does not apply for geographical area within a radius of 20 km from the cen...
8 Important information for the correct recycle/treatment procedures of this equipment The mentioned information are reported herewith in compliance with directive 2002/95/CE, 2002/96/CE and 2003/108/CE which requires a separate collection system and specific treatment and disposal procedures for th...
9 1. Introduction 1.1 An Overview of WebShare 3G 244WN Welcome to the WebShare 802.11n 3G/ ADSL2+ (VPN) Firewall Router. The router is an “all-in-one” ADSL router, combining an ADSL modem, ADSL router and Ethernet network switch functionalities, providing everything you need to get the machines on y...
10 1.3 Features Technical charateristics of WebShare 3G 244WN: • Express Internet Access: This router complies with worldwide ADSL standards. It supports downstream rates of up to 12/24 Mbps with ADSL2/2+, 8 Mbps with ADSL, and upstream rates of up to 1 Mbps. With this technology, users enjoy not on...
11 • Universal Plug and Play (UPnP) and UPnP NAT Traversal: This protocol is used to enable simple and robust connectivity among stand- alone devices and PCs from many different vendors. It makes network simple and affordable for users. UPnP architecture leverages TCP/IP and the Web to enable seamle...
13 2. Using WebShare 3G 244WN 2.1 Cautions for using the WebShare 3G 244WN • Do not place the Router under high humidity and high temperature. • Do not use the same power source for Router with other equipment. • Do not open or repair the case yourself. • If the Router is too hot, turn off the power...
14 • Blinking when data is Transmitted / Received. USB • Lit green when the device is connected to a USB device and ready. • Flashing when the device is sending/receiving data. Wireless • Lit green when the wireless connection is established. • Flashing when the device is sending/receiving data. • F...
16 2.4 Cabling and operationa modes WebShare 3G 244WN can be set in 3 difference mode: ADSL only, 3G only or ADSL main with 3G backup. 2.4.1 Single WAN ADSL In this mode, WebShare 3G 244WN works as a standard ADSL2+ Router. Follow the followings steps to cabling the device: • Connect WAN Port to the...
17 2.4.2 Single WAN 3G In this mode, WebShare 3G 244WN works using an external 3G/HDSPA USB modem to connect the LAN to Internet. Follow the followings steps to cabling the device: • Connect the 3G USB modem on the USB 2.0 port on the rear panel of the product. • Connect AC-DC Adapter on AC and on d...
18 2.4.3 Dual WAN ADSL/3G with backup mode In this mode, WebShare 3G 244WN works using ADSL as main connection. In case of failover of the main connection, WEbShare 3G 244WN automatically backup it to an external 3G/HDSPA USB modem, in order to provide an always-on connection for the LAN devices. Fo...
19 2.4.4 Cabling the LAN connection In this mode, WebShare 3G 244WN can be connected to an existing LAN or can be use to create a new local area network. Is possible to connect the WebShare 3G 244WN through its embedded Gigabit Ethernet switch or by its embedded Access Point (based on 802.11n specif...
20 3. Basic Installation Before configuring this device, you have to check with your ISP (Internet Service Provider) what kind of service is provided such as PPPoE, PPPoA, RFC1483, or IPoA. Gather the information as illustrated in the following table and keep it for reference. PPPoE VPI and VCI VC-b...
21 If you ever forget the password to log in, you may press the RESET button up to 6 seconds to restore the factory default settings. The parameters of LAN and WAN ports are pre-set in the factory. The default values are shown below. Wireless LAN Interface SSID A02-RAU244-W300N Security WPA-PSK WPA ...
23 Configuring PC (Windows Vista) 1. Go to Start -> Control Panel (in Classic View). In the Control Panel, double-click on Network and Sharing Center icon. 2. Click Manage Network connections then double-click Local Area Connection. Click Properties . 3. Click Continue (Windows needs your permiss...
25 4. Management Interface When you login into the management interface, WebShare 3G 244WN will show a simplified interface for configuring standards parameters needed to access on Internet. It is also possible to access to an advanced management interface for deep configurations. In this user guide...
26 5. Status In this section there are shown all parameters about LAN, WLAN, USB and ADSL interfaces. Device Information Field Description Model Name Show the model code for WebShare 3G 244WN. Host Name Show the name of the device that will be find from others LAN clients. System Up-Time Show the up...
28 5.1 ADSL Status This section displays the ADSL overall status, which shows a number of helpful information such as DSP firmware version. 5.2 3G Status This section displays the 3G Card’s overall status, which shows you a number of helpful information such as the current signal strength and statis...
32 Netmask The destination Netmask address. Gateway/Interface The IP address of the gateway or existing interface that this route will use. Cost The number of hops counted as the cost of the route. RIP Routing Table Parametro Descrizione Destination The IP address of the destination network. Netmask...
33 5.8 UPnP Portmap The section lists all port-mapping established using UPnP (Universal Plug and Play. See Advanced section of this manual for more details on UPnP and the router’s UPnP configuration options. 5.9 Event Log This page displays the router’s Event Log entries. Major events are logged t...
34 5.10 Error Log Any errors encountered by the router (e.g. invalid names given to entries) are logged to this window. 5.11 Diagnostic It tests the connection to computer(s) which is connected to LAN ports and also the WAN Internet connection. If PING ww.google.com is shown FAIL and the rest is PAS...
35 6. Quick Start ADSL WAN Backup cannot be configured using Quick Start procedure. Please refer to Advanced – WAN Interface to set this function. 6.1 Single WAN ADSL Configuration 1. Select ADSL from Connect Mode drop-down menu and click Continue . 2. If your ADSL line is not ready, you need to che...
39 6.2 Single WAN 3G Configuration 1. Select 3G from Connect Mode drop-down menu and click Continue . 2. Select the connection method using Mode combo-box. 3. Insert then the APN provided by ISP and the PIN code if the SIM is secured. 4. Click on Apply in order to start Wireless configuration. You h...
40 6.3 Wireless Configuration In this section, is possible to set all wireless connection parameters (transmission mode, channel ID, security, etc). Wireless Field Description WLAN Service Default setting is set to Enable . If you want to use wireless, 802.11n, 802.11g and 802.11b device in your net...
41 discovered and recognized. Default setting is Enable . Channel ID Select the ID channel that you would like to use. Security Parameters Field Description Security Mode You can disable or enable with WPA or WEP for protecting wireless network. The default mode of wireless security is Disable . Pre...
42 7. Configuration When you click this item, you get following sub-items to configure the ADSL router. 7.1 LAN – Local Area Network 7.1.1 Bridge Interface You can setup member ports for each VLAN group under Bridge Interface section. From the example, two VLAN groups need to be created. Ethernet: P...
43 ethernet1 P2 / P3 / P4 / Wireless ethernet2 P3 / P4 / Wireless ethernet3 P4 / Wireless ethernet4 Wireless 7.1.2 Ethernet Field Description IP Address The default IP on this router. Subnet Mask The default subnet mask on this router. RIP RIP v1, RIP v2, and RIP v2 Multicast. Check to Enable RIP fu...
45 7.1.4 Ethernet Client Filter The Ethernet Client Filter supports up to 16 Ethernet network machines that helps you to manage your network control to accept traffic from specific authorized machines or can restrict unwanted machine(s) to access your LAN. There are no pre-define Ethernet MAC addres...
47 7.1.5 Wireless Parameters Field Description WLAN Service Default setting is set to Enable . If you do not have any wireless, 802.11n, 802.11g and 802.11b, device in your network, select Disable . Mode The default setting is 802.11b+g+n (Mixed mode). If you do not know or have both 11g and 11n dev...
50 • ESSID field is case sensitive and it cannot excess 32 characters. • Wireless performance may degrade if select ID channel is already being occupied by other AP(s). • The Power Level maybe different in each access network user premises environment and choose the most suitable level for your netw...
53 7.1.7 Wireless Client/MAC Address Filter The MAC Address supports up to 16 wireless network machines and helps you manage your network control to accept traffic from specific authorized machines or to restrict unwanted machine(s) to access your LAN. There are no pre-define MAC Address filter rule...
55 7.1.8 WPS WPS feature is follow Wi-Fi Alliance WPS standard and it easily set up security-enabled Wi-Fi networks in the home and small office environment. It reduces half the user steps to configure a network and supports two methods that are familiar to most consumers to configure a network and ...
56 7.1.9 Port Setting This section allows you to configure the settings for the router’s Ethernet ports to solve some of the compatibility problems that may be encountered while connecting to the Internet, as well allowing users to tweak the performance of their network. Field Description Port # Con...
57 If the packet is high priority, it will flow first and will not be constrained by the Rate Limit. Therefore, when this feature is enabled, the router’s Ethernet switch will check the 2nd octet of each IP packet. If the value in the TOS field matches the checked values in the table (0 to 63), this...
58 If you check DHCP Relay Agent and click Next , then you will have to enter the IP address of the DHCP server which will assign an IP address back to the DHCP client in the LAN. Use this function only if advised to do so by your network administrator or ISP. Click Apply to enable this function.
59 7.2 WAN – Wide Area Network WAN refers to your Wide Area Network connection, i.e. your router’s connection to your ISP and the Internet. 7.2.1 WAN Interface The factory default settings are configured as following: WAN Profile Encapsultation PPPoA Multiplexing VC-Mux Mode Routing VPI/VCI 8/35 Tho...
62 WAN CONNECTION – 3G MODE In the ADSL mode, as the ADSL is not available(failover/failback), it will turn to 3G mode for supporting WAN Connection. However, in the 3G Mode, the ADSL can not support WAN Connection when 3G Mode is unavailable. You have to pay particular attention to the WAN-ADSL con...
73 3G CONNECTION Connection Field Description Profile Port Select the profile port either ADSL or 3G iBurst Enable a specific parameters set for iBurst client. Mode Permit to choose which connection method use as preferred. Tel No. Insert telephone number required for a 3G connection. APN Specify th...
75 7.2.3 ADSL Mode Field Description Connect Mode This mode will automatically detect your ADSL line code, ADSL2+, ADSL2, AnnexM2 and AnnexM2+, ADSL, All. Please keep the factory setting unless ADSL is detected as the symptom of synchronization problem Modulation It will automatically detect capabil...
76 downstream performance. Higher the gain will increase the downstream rate but it sometimes causes unstable ADSL line. The configurable ADSL coding gain is from 0 dB to 7dB, or automatic 7.3 System 7.3.1 Time Zone The router does not have a real time clock on board; instead, it uses the Simple Net...
77 time from the SNTP server you have specified. If you prefer to specify an SNTP server other than those in the list, simply enter its IP address as shown above. Your ISP may provide an SNTP server for you to use. Daylight Saving is also known as Summer Time Period. Many places in the world adapt i...
78 software it runs. Over time this software may be improved and revised, and your router allows you to upgrade the software it runs to take advantage of these changes. Clicking on Browse will allow you to select the new firmware image file you have downloaded to your PC. Once the correct file is se...
81 You can change the user’s password , whether their account is active and valid , as well as add a comment to each user account. Click Edit/Delete button to save your revise. You cannot delete the default admin account, if you do you will be log out. However, you can delete any other created accou...
82 7.4 Firewall and Access Control Your router includes a full SPI (Stateful Packet Inspection) firewall for controlling Internet access from your LAN, as well as helping to prevent attacks from hackers. Besides, when using NAT, the router acts as a “natural” Internet firewall, as all PCs on your LA...
83 computers or applications accessing your local network from the Internet. o Intrusion Detection: Enable Intrusion Detection to detect, prevent and log malicious attacks. 2. Access Control: Prevents access from PCs on your local network: o Firewall Security and Policy (General Settings): Outbound ...
84 The Block WAN Request is a stand-alone function and not relate to whether security enable or disable. Mostly it is for preventing any scan tools from WAN site by hacker. Table 1: Predefined Port Filter Application Protocol Port Number Low Level Medium Level High Level Start End Inbound Outbound I...
85 DNS (53) TCP(6) 53 53 NO YES NO YES NO YES FTP(21) TCP(6) 21 21 NO YES NO YES NO NO Telnet(23) TCP(6) 23 23 NO YES NO YES NO NO SMTP(25) TCP(6) 25 25 NO YES NO YES NO YES POP3(110) TCP(6) 110 110 NO YES NO YES NO YES NEWS(NNTP) (Network News Transfer Protocol) TCP(6) 119 119 NO YES NO YES NO NO R...
86 SSH(22) TCP(6) 22 22 NO YES NO YES NO NO NTP /SNTP UDP(17) 123 123 NO YES NO YES NO YES HTTP/HTTP Proxy (8080) TCP(6) 8080 8080 NO YES NO NO NO NO HTTPS(443) TCP(6) 443 443 NO YES NO YES N/A N/A ICQ (5190) TCP(6) 5190 5190 YES YES N/A N/A N/A N/A MSN (1863) TCP(6) 1863 1863 YES YES N/A N/A N/A N/...
87 7.4.2 Packet Filter This function is only available when the Firewall is enabled and one of these four security levels is chosen (All blocked, High, Medium and Low). The preset port filter rules in the Packet Filter must modify accordingly to the level of Firewall, which is selected. See Table1: ...
90 Time Schedule It is self-defined time period. You may specify a time schedule for your prioritization policy. For setup and detail, refer to Time Schedule section Protocol Number Insert the port number, i.e. GRE 47 Inbound/Outbound Select Allow or Block the access to the Internet (“Outbound”) or ...
94 7.4.4 URL Filter URL (Uniform Resource Locator – e.g. an address in the form of http://www.abcde.com or http://www.example.com) filter rules allow you to prevent users on your network from accessing particular websites by their URL. There are no pre-defined URL filter rules; you can add filter ru...
97 Blocking first. Peer to Peer Blocking The default is set to Disabled. Disabled: Instant Message blocking is not triggered. No action will be performed. Always On: Action is enabled. TimeSlot1 ~ TimeSlot16: This is the self-defined time period. You may specify the time period to trigger the blocki...
98 7.5.1 Prioritization There are three priority settings to be provided in the Router: • High • Normal • Low • And the balances of utilization for each priority are High (60%), Normal (30%) and Low (10%). To delete the application, you can choose Delete option and then click Edit/Delete . Field Des...
99 Source Port The source port of packets to be monitored Destination IP Address Range The destination IP address or range of packets to be monitored Destination Port The destination port of packets to be monitored. DSCP Marking Differentiated Services Code Point (DSCP), it is the first 6 bits in th...
101 7.6 Virtual Server In TCP/IP and UDP networks a port is a 16-bit number used to identify which application program (usually a server) incoming connections should be delivered to. Some ports have numbers that are pre-assigned to them by the IANA (the Internet Assigned Numbers Authority), and thes...
105 Router with IP address of 192.168.1.254. Since port number 80 has already been predefined, next to the Application click Helper. A list of predefined rules window will pop and select HTTP_Sever. Application: HTTP_Sever Time Schedule: Always On Protocol: tcp External Port: 80-80 Redirect Port: 80...
109 7.7 Time Schedule The Time Schedule supports up to 16 time slots which helps you to manage your Internet connection. In each time profile, you may schedule specific day(s) i.e. Monday through Sunday to restrict or allowing the usage of the Internet by users or applications. This Time Schedule co...
111 Choose Edit radio button and click Edit/Delete button to apply your changes. To delete a Time Slot rule, choose Delete radio button, and click Delete button to delete the existing Time profile, i.e. erase the Day and back to default setting of Start Time / End Time.
112 7.8 Advanced Configuration options within the Advanced section are for users who wish to take advantage of the more advanced features of the router. Users who do not understand the features should not attempt to reconfigure their router, unless advised to do so by support staff. 7.8.1 Static Rou...
114 7.8.3 Device Management The Device Management advanced configuration settings allow you to control your router’s security options and device monitoring features. Device Host Name Field Description Host Name Give a name for it Embedded Web Server Field Description HTTP Port This is the port numbe...
119 7.8.4 IGMP IGMP, known as Internet Group Management Protocol, is used to management hosts from multicast group. Field Description IGMP Forwarding Accepting multicast packet. Default is set to Enable . IGMP Snooping Allowing switched Ethernet to check and make correct forwarding decisions. Defaul...
120 8. Logout To exit the router’s web interface, choose Logout. Please ensure that you have saved the configuration settings before you logout. Be aware that the router is restricted to only one PC accessing the configuration web pages at a time. Once a PC has logged into the web interface, other P...
121 APPENDIX A: Troubleshooting This chapter covers potential problems and the corresponding remedies. A.1 Using LEDs to diagnose problems The LEDs are useful aides for finding possible problem causes. A.1.1 Power LED The PWR LED on the front panel does not light up. Steps Corrective Action 1 Make s...
122 Steps Corrective Action 1 Check the telephone wire and connections between the ADSL Router DSL port and the wall jack. 2 Make sure that the telephone company has checked your phone line and set it up for DSL service. 3 Reset your ADSL line to reinitialize your link to the DSLAM. For details, ref...
125 Authentication may be through the user name and password, the MAC address or the host name. 2 The username and password apply to PPPoE and PPoA encapsulation only. Make sure that you have entered the correct Service Type, User Name and Password (be sure to use the correct casing). A.7 Internet A...
126 connection. Refer to Section A.7 for instructions on checking your WAN connection. 4 See also the Section A.4. A.9 Remote Node Connection I cannot connect to a remote node or ISP. Steps Corrective Action 1 Check WAN screen to verify that the username and password are entered properly. 2 Verify y...
127 is, in effect, louder and thus easier to detect, provided that the receiver knows the parameters of the spread-spectrum signal being broadcast. If a receiver is not tuned to the right frequency, a spread-spectrum signal looks like background noise. There are two main alternatives, Direct Sequenc...
128 Question What is infrastructure mode? Answer When a wireless network is set to infrastructure mode, the wireless network is configured to communicate with a wired network through a wireless access point. Question What is roaming? Answer Roaming is the ability of a portable computer user to commu...
129 APPENDIX B: Modem 3G Compatibility List Following a listo of compatible devices (HSDPA/GPRS/UMTS) tested and fully compliant with WebShare 3G 244WN: Brand Model Sierra Aircard 880U Sierra Aircard 875U Sierra Aircard 885U Huawei E180 Huawei E170 Huawei E160G Huawei E169G Huawei E169 Huawei E220 H...
131 APPENDIX C: Support If you have any problems with the WebShare Wireless Router ADSL2+, please consult this manual. If you continue to have problems you should contact the dealer where you bought this ADSL Router. If you have any other questions you can contact the Atlantis Land company directly ...
Atlantis Land Manuals
-
Atlantis Land A02-RA240-W54
Manual
-
Atlantis Land PCI-54M
Manual
-
Atlantis Land A02-ANT0801
Manual
-
Atlantis Land A03-HP1501
Manual
-
Atlantis Land A03-PS651 _MX01
Manual
-
Atlantis Land A02-PSU-W54_ME01
Manual
-
Atlantis Land 500
Manual
-
Atlantis Land A02-IPCAM4-W54
Manual
-
Atlantis Land Wireless Broadband Router
Manual
-
Atlantis Land A05-19AM-C08
Manual
-
Atlantis Land A04-M313AD
Manual
-
Atlantis Land A02-PCI-W54M
Manual
-
Atlantis Land EClick M215
Manual
-
Atlantis Land A05-19BM-F02
Manual
-
Atlantis Land A02-SG64-F
Manual
-
Atlantis Land A02-OANT16S01
Manual
-
Atlantis Land A02-OANT15S02
Manual
-
Atlantis Land A02-S32-S/M2
Manual
-
Atlantis Land A02-UP-W54
Manual
-
Atlantis Land 10/100Mbps
Manual