ATD ATD-8401 - Manuals

ASSEMBLY: NOTE : Use Teflon pipe tape on all threaded joints. Make sure all joints are securely tightened. Legs, Wheels and Handle Bar Assembly (Refer to Fig 1): 1. Attach both the left leg (#7) and the right leg (#17) to the tank (#15) using the four screws & nuts. The bottom section of the two...

Air Pressure Adjuster and Safety Valve Assembly (Refer to Fig 3): Use PTFE tape on all air fitting threads. 1. Attach the connector (#8) to one of the side inlets of the air pressure adjuster (#9). Attach the intake manifold (#12) to the other side of the nipple connector (#11). Make sure the pressu...

OPERATION: WARNING: Always wear your hood, dust mask and heavy-duty canvas gloves when operating. 1. Close the sand metering valve (#26), pour about 25 lbs of abrasive medium into the tank. Then close the tank filler cap (#4) securely, assuring that o-ring (#3) is in place. 2. Turn the air pressure ...