ATD ATD-8401 - Manual
ATD ATD-8401 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – NOTE; to fix the position of the axle.
- Page 5 – assembly and the bottom assembly respectively.
- Page 6 – AIR/SAND SUPPLY REQUIREMENTS
- Page 7 – ABRASIVE FLOW ADJUSTMENT
- Page 8 – SAFETY AND HEALTH CONSIDERATIONS; much more quickly than others pieces.
ATD-8401
40LB SANDBLASTER
INSTRUCTION MANUAL
DESCRIPTION:
ATD sandblasting equipment is designed for cleaning and removing rust, scale, paint and
dirt. It is the ideal method for stripping, polishing and etching projects. This equipment can
be used with abrasive powders and liquids. This model is equipped with the standard use
ceramic nozzle.
SAFETY WARNING & CAUTIONS:
Warning: When using pneumatic equipment, basic safety precautions should always be
followed to reduce the risk of personal injury and hazards due to over pressurization.
READ ALL INSTRUCTIONS BEFORE USING:
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use unit in damp, wet or poorly lit locations. Don’t
expose to rain. Keep work area well lit. Do not use electrically powered air compressors
in the presence of flammable gases or liquids.
3. Keep children away. Children must never be allowed in the work area.
4. Do not use inappropriate attachments in an attempt to exceed the unit capacities.
5. Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving
parts. Non-skid footwear is recommended. Always wear the hood (included), a dust
mask and heavy-duty canvas gloves.
6. Use eye and ear protection. Always wear ANSI approved chemical splash goggles
when working with chemicals. Wear an ANSI approved dust mask or respirator when
working around metal, wood and chemical dusts and mists.
7. Do not overreach. Keep proper footing and balance at all times. Do not reach over or
across running machines.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
ASSEMBLY: NOTE : Use Teflon pipe tape on all threaded joints. Make sure all joints are securely tightened. Legs, Wheels and Handle Bar Assembly (Refer to Fig 1): 1. Attach both the left leg (#7) and the right leg (#17) to the tank (#15) using the four screws & nuts. The bottom section of the two...
Air Pressure Adjuster and Safety Valve Assembly (Refer to Fig 3): Use PTFE tape on all air fitting threads. 1. Attach the connector (#8) to one of the side inlets of the air pressure adjuster (#9). Attach the intake manifold (#12) to the other side of the nipple connector (#11). Make sure the pressu...
OPERATION: WARNING: Always wear your hood, dust mask and heavy-duty canvas gloves when operating. 1. Close the sand metering valve (#26), pour about 25 lbs of abrasive medium into the tank. Then close the tank filler cap (#4) securely, assuring that o-ring (#3) is in place. 2. Turn the air pressure ...
