Asko CC4927S - Manuals

EN 5 USE Controls Switching the fan on and off • Switch the fan on with the on/off button (A) and select the desired extractor setting with buttons ‘B’ and ‘C’. The ‘I’ display indicates which setting has been selected. • Use button ‘D’ to switch on the intensive setting. “HI” appears in the ‘I’ dis...

EN 6 USE Switching on the timer • Switch on the extractor hood with button ‘A’.• Set the extraction strength with buttons ‘B’ and ‘C’.• Press the Timer button ‘F’. The extractor hood switches off automatically after 30 minutes. Switch off the Timer function by pressing button ‘F’ again, or by switch...

EN 7 Cleaning Attention! Before performing any maintenance operation, isolate the hood from the electrical supply by switching off at the connector and removing the connector fuse. Or if the appliance has been connected through a plug and socket, then the plug must be removed from the socket. The bu...

EN 8 Grease filters Removing the grease filters Switch off the electricity! Remove the plug from the socket or switch the electricity off at the mains. Open the panel and pull the special handle to remove the filter. Replacing the carbon filter The carbon filter must always be used if the built in u...

EN 9 INSTALLATION General This appliance should be connected to the power supply by a recognized fitter who is familiar with, and works according to the correct safety regulations. This appliance meets the European requirements. Important that you know: • The minimum distance between the supporting ...

EN 10 INSTALLATION Electrical connection This appliance is manufactured in class I, it must therefore beconnected to the earth system. Make sure the supply voltage ratings correspond with those stated on the appliance data plate. The connection to the mains is carried out as follows: BROWN = phase L...

EN 11 INSTALLATION Installation • Open the panel. • Remove the grease filter.• Connect the controls together as depicted. • • First remove the 6 screws (2 on the left, 2 on the right, 2 on the front), followed by the frame. • Use a saw to create a recess in the bottom side of the cupboard (at a dist...

EN 12 TECHNICAL SPECIFICATIONS Hood type CC4727S CC4927S CC41227S Type / Approval Built-in unit / G02-1M BRS ATB 2LED Built-in unit / G02-1M BRS ATB 2LED Built-in unit / G02-1M BRS ATB 2LED Control type Electronic push button s Electronic push button s Electronic push buttons Width 6 1 1 6 8 7 7 Sup...

EN 13 APPENDIX Disposal Disposal of appliance and packaging By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The local author...