Ashly WR-5E - Manuals

Ashly WR-5E – Manual in PDF format online.

Manuals:

Manual Ashly WR-5E

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6

Summary

Page 2 - Operating Manual - WR-5e Remote Control for NE Products; Under no circumstances; Wiring in parallel from a central; in series

Operating Manual - WR-5e Remote Control for NE Products 2 2. Wiring a WR-5e The WR-5 uses a four conductor  phantom powered serial bus to con- nect to its host unit or to subsequent  WR-5 units.  Up to four WR-5 re- motes can be powered from one host  unit.  Ashly makes an Inline Power  Booster for ...

Page 3 - J2 pin 1 must have its J6 jumper installed.; When more than four WR-5s are being used; In either application,; Cable Length; Therefore, voltage drop across CAT5 wire can be computed as:

3 Operating Manual - WR-5e Remote Control for NE Products down block connection, then back out from there to the next WR-5 data input (J2 pin 2), out J2 pin  1 of that WR-5 back to yet another isolated punch down block connection, and so on, with the last  WR-5 Data Output (J2 pin 1) wired back to t...

Page 4 - unit will appear in red text while an online unit appears in green.; Off; - No function assigned and the button’s LED remains unlit; Preset Recall; - A range of presets can be assigned to a button and selected by press-; Gain Control

Operating Manual - WR-5e Remote Control for NE Products 4 3. Getting Started The WR-5e comes with all function buttons set to “Off”.  To program from a PC running Protea  NE Software, follow these steps: 1)  Connect a PC running Protea NE Software to the host NE product using a standard ethernet  RJ...

Ashly Manuals