Ashly CLX-51 - Manual
Ashly CLX-51 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
CLX-51/CLX-52
The unit shall be a single (CLX-51) or dual (CLX-52) channel com-
pressor limiter with independent gain, threshold, ratio, attack,
release, and output level adjustments. It shall have a detector patch
point allowing for the connection of an external equalizer in the
detector loop to produce frequency selective limiting; or allows the
connection of an external microphone source to produce voice-
over-compression. It shall have front panel mounted switches for
engaging/defeating the compressor/limiter functions. It shall have
front panel switches for selecting input or output meter display. It
shall have both XLR and 1/4 connectors on inputs and outputs.
Performance specifications shall meet or exceed the following:
Gain control shall be +/- 15dB. Threshold shall be adjustable from
-40dB to +22dB. Ratio shall be adjustable from 2:1 to infinity.
Attack time shall be adjustable from 200uSec to 20mSec. Release
time shall be adjustable from 100mSec to 3 seconds. the output
level shall be adjustable from minus infinity to +18dBu. The maxi-
mum in-out level shall be +23dBu. The input impedance shall be
20K ohm balanced bridging. The output impedance shall be 200
ohm quasi-balanced. The frequency response shall be 20Hz to
20KHz, +/-0.2dB. Distortion shall be <0.01% THD, 1KHz @0dBu,
and <0.15% THD @ +15dBu from 20Hz to 20KHz. Hum and
noise shall not exceed -96dBu @ unity gain. The unit shall operate
at 115VAC +/-5%, 50-60Hz. The unit shall be designed for mount-
ing in a standard EIA 19 rack (19L x 1.75H x 6D) and shall
have a shipping weight of 8 lbs. The unit shall either be a model
CLX-51 (single channel) or a CLX-52 (dual channel) Compressor
Limiter manufactured by Ashly Audio, Inc. No other unit shall be
acceptable unless submitted data from and independent research
lab verifies that the above size/performances specifications are met.
TECHNICAL NOTES & SPECIFICATIONS
ARCHITECTS SPECIFICATIONS
CLX-51/CLX-52 Peak Compressor/Limiters
Features:
XLR and 1/4 Connectors
Peak Compression Circuitry
Precision Balanced Inputs
Extremely Low Noise and Distortion
Calibrated Threshold Control
Detector Patch Point
Input-Output Meter Switch
Gain Reduction Meters
Stereo Tie Switch on CLX-52
U.L. Listed
5-Year Worry-Free Warranty
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
